Dukane 28A8711 User Manual

LCD Projector

Model 28A8711

USER'S MANUAL

Please read this user's manual thoroughly to

ensure correct usage through understanding

LCD Projector 28A8711

USER'S MANUAL Vol.1 (Basic)

USER'S MANUAL

Thank you for purchasing this projector.

WARNING • Please read the accompanying manual “SAFETY

INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.

NOTE

• The manufacturer assumes no responsibility for any errors that may appear in this manual

• The reproduction, transmission or use of this document or contents is not permitted without express written authority.

TRADEMARK ACKNOWLEDGEMENT :

• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.

• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• All other trademarks are the property of their respective owners.

• The information in this manual is subject to change without notice.

CONTENTS

Page

PROJECTOR FEATURES................2

PREPARATIONS ..............................2

PART NAMES...................................4

SETTING UP

THE PROJECTOR ............................6

CONNECTING

YOUR DEVICES................................8

USING THE REMOTE

CONTROL.......................................13

TURNING ON THE POWER ...........15

TURNING OFF THE POWER .........17

ADJUSTING THE VOLUME ...........18

TEMPORARILY MUTING

THE SOUND....................................18

ADJUSTING THE POSITION..........19

USING THE AUTOMATIC

ADJUSTMENT FEATURE ..............20

CORRECTING KEYSTONE

DISTORTIONS ................................21

USING THE MAGNIFY

FEATURE........................................22

FREEZING THE SCREEN ..............22

ADJUSTING SCREEN WITH

ONE-TOUCH...................................23

SELECTING THE ASPECT

RATIO..............................................24

TEMPORARILY BLANKING

THE SCREEN..................................24

DISPLAYING CHILD WINDOW

(P. IN. P: Picture in Picture) ..........24

USING THE MENU

FUNCTIONS....................................25

OPERATING THE PC SCREEN .....26

THE LAMP ......................................27

THE AIR FILTER.............................29

OTHER CARE.................................31

Page

PROJECTOR

FEATURES

This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.

Ultra High Brightness

●

Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system

Partial Magnification Function

●

Interesting parts of images can be magnified for closer viewing

PREPARATIONS

Your projector should come with the items shown below. Check to make sure that all the items are included. Contact your dealer if anything is missing.

NOTE

• Keep the original packing material for future reshipment.

Power cord

(US Type)

Projector

(with Lens Cap)

Liquid Crystal Projector

CP-X880/CP-X885

ENGLISH

(CP-X880W/CP-X885W)

USER'S MANUALVol.1 Basic

DEUTSCH

Please read this user's manual thoroughly to ensure correct usage through understanding.

BEDIENUNGSANLEITUNG Teil 1 Grundlagen

Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.

MANUEL D'UTILISATION Vol.1 Fondements

FRANÇAIS

Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.

MANUALE D'ISTRUZIONI Vol.1 Informazioni di base

Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere

ITALIANO

quanto riportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO Vol.1 Básico

Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.

ESPAÑOL

GEBRUIKSAANWIJZING Vol.1 Basis

Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.

BRUKERHÅNDBOK Vol.1 Grunnleggende

Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.

NEDERLANDS

NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico

Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.

NORSK

PORTGÊS

中中文文

REGULATORY NOTICES

RGB cable USB mouse

One Touch Function

●

Just press the ONE TOUCH button to automatically retrieve input signals, calibrate images, and correct keystone distortion

Whisper Mode Equipped

●

Special mode is available for reducing projector noise to achieve quieter operation

Power cord

(UK Type)

Power cord

(Europe Type)

Video/Audio cable

cable

User's Manuals

(Vol.1/Vol.2)

Safety Instructions

Soft carrying case

RS-232C

adapter

Two AA batteries

(for the remote

control)

LASER INDICATOR

VIDEO

RGB

STANDBY/ON

PAGE

ZOOM

FOCUS

DOWN

BLANK

LASER

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

PinP

MAGNIFY VOLUME

FREEZE

MUTE

OFF

WIRELESS KEYSTONE

ONE TOUCH

Remote control

WARNING Precautions to observe in regards to the power cord: Please use extra

caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector:

•

Only plug the power cord into outlets rated for use with the power cord's specified voltage range.

• Only use the power cord that came with the projector.

• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-

PRONGED PLUG!

• Make sure that you firmly connect the power cord to the projector and wall outlet.

Connect your devices to the projector

Connect your computer, VCR and/or other devices you will be using to the projector.

Insert the batteries into the remote

control

Connect the power cord

(1)

Connect the connector of the electrical power cord to the AC inlet of the main unit.

(2) Firmly plug the power cord's plug into the outlet

8 12

〜

Power outlet

AC inlet

(1)

(2)

Power cord

PART NAMES

STANDBY/ON

INPUT

KEYSTONE

RESET

LANP

TENP

ONE TOUCH

RGB

BNC

DVI

VIDEO

S-VIDEO

COMPONENT

FOCUS ZOOM

RGB indicator

BNC indicator

DVI indicator

VIDEO indicator

S-VIDEO indicator

COMPONENT indicator

THE PROJECTOR

INPUT dial

KEYSTONE button

Indicates the corresponding reference page

ONE TOUCH button

RESET button

FOCUS button

ZOOM

MENU button

Vol.2

LAMP indicator

button

STANDBY/ON button

Elevator feet

Lens cap

COMPONENT VIDEO port

CONTROL port

WIRELESS & NETWORK

MODULE port Vol.2

RGB OUT port

DVI port

RGB port

Control Panel

Vol.2

Lens

REMOTE CONTROL port

Elevator button

VIDEO IN port

TEMP indicator

Elevator screw

Air filter

Remote sensor

S-VIDEO IN port

Remote sensor

AC power inlet

BNC port

AUDIO IN R/L port

AUDIO IN 1/2 port

Power switch

USB port

AUDIO OUT port

THE REMOTE CONTROL

LASER INDICATOR

VIDEO button

STANDBY/ON button

FOCUS buttons

BLANK button

Disk pad

Mouse cursor movement Left mouse click

ASPECT button

Left /Right

Key buttons

ESC button

MENU button

POSITION button

MAGNIFY buttons

WIRELESS button Vol.2

KEYSTONE button

LASER INDICATOR

VIDEO

ZOOM

AUTO

FREEZE

RGB

PAGE

DOWN

PinP

MUTE

ONE TOUCH

STANDBY/ON

FOCUS

BLANK

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

MAGNIFY VOLUME

OFF

WIRELESS KEYSTONE

LASER

RGB button

ZOOM

buttons

PAGE buttons

LASER button

Right mouse button

Right mouse click

Lever switch (*)

RESET button

AUTO button

PinP button

VOLUME button

MUTE button

FREEZE button

ONE TOUCH button

REMOTE CONTROL port

* Using the lever switch

Flip toward disk pad : Up ( ) key

Flip toward MENU button

Press in center : ENTER button

: Down ( ) key

SETTING UP THE PROJECTOR

CAUTION •

of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.

• If you press the elevator buttons without holding the projector, the projector might

crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

Install the projector in a suitable environment according to instructions

Adjusting the Projector's Elevator Feet

If the surface on which the projector is placed, or the screen is tilted, use the elevator feet and elevator screw to adjust the projection angle of the main unit. The adjustment range of the elevator feet is 0 to 9 degrees.

Press and hold in the elevator

buttons

Elevator button

Raise or lower the projector to the

desired height and then release the elevator buttons

When you release the elevator buttons, the elevator feet will lock into position.

Elevator feet

Turn the elevator screw to fine tune.

Elevator screw

Adjusting the Screen Size and Projection Distance

Refer to the illustrations and tables below to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen a:Distance from the projector to the screen (±10%) b:Distance from the lens center to the bottom of the screen (±10%) c:Distance from the lens center to the top of the screen (±10%)

The screen

Lens center

The screen

Top view

Side view

Top view

If 4:3 aspect ratio

Screen Size [inch (m)]

30 (0.8) 34 (0.9) 52 (1.3) 0 (0) 18 (46) 40 (1.0) 46 (1.2) 71 (1.8) 0 (0) 24 (61) 50 (1.3) 58 (1.5) 89 (2.3) 0 (0) 30 (76) 60 (1.5) 71 (1.8) 70 (1.8) 83 (2.1) 80 (2.0) 95 (2.4)

90 (2.3) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.0) 250 (6.3) 300 (7.5)

a [inch (m)]

Min. Max.

107 (2.7) 126 (3.2)

144 (3.7) 108 (2.7) 162 (4.1) 120 (3.0) 181 (4.6) 144 (3.7) 217 (5.5) 181 (4.6) 272 (6.9) 243 (6.2) 364 (9.2) 304 (7.7)

455 (11.6) 366 (9.3)

547 (13.9)

If 16:9 aspect ratio

[inch (cm)]c [inch (cm)]

0 (0) 36 (91) 0 (0) 42 (107) 0 (0) 48 (122) 0 (0) 54 (137) 0 (0) 60 (152) 0 (0) 72 (183) 0 (0) 90 (229) 0 (0)

120 (305)

0 (0)

150 (381)

0 (0)

180 (457)

Lens center

Side view

Screen Size [inch (m)]

30 (0.8) 37 (0.9) 57 (1.4) 2 (6.2) 17 (44) 40 (1.0) 50 (1.3) 77 (2.0) 13 (32) 27 (70) 50 (1.3) 64 (1.6) 97 (2.5) 16 (41) 31 (78) 60 (1.5) 77 (2.0) 70 (1.8) 90 (2.3) 80 (2.0)

90 (2.3) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.0) 250 (6.3) 300 (7.5)

a [inch (m)]

Min. Max.

117 (3.0)

137 (3.5) 104 (2.6) 157 (4.0) 117 (3.0) 177 (4.5) 131 (3.3) 197 (5.0) 157 (4.0) 237 (6.0) 198 (5.0) 296 (7.5) 265 (6.7)

396 (10.1) 332 (8.4)

496 (12.6)

399 (10.1)

596 (15.1)

[inch (cm)]c [inch (cm)]

19 (49) 34 (86) 22 (57) 37 (94) 26 (65) 40 (102) 29 (73) 43 (110) 32 (81) 47 (118)

38 (97) 53 (134) 48 (121) 63 (159) 64 (162) 78 (199) 80 (202) 94 (240) 96 (243)

110 (280)

CONNECTING YOUR DEVICES

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

ATTENTION

• Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.

• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin assignment of connectors and RS-232C communication data.

• Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

• Some other cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

• Secure the screws on the connectors and tighten.

Precautions to observe when connecting other devices to the projector

Indicates the corresponding reference page

Display monitors

DVD players

Laptop computers

VCRs

Desktop computers

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.

Function Projector Port Connection Cables

RGB

Analog RGB input

BNC(R/CR/PR)(G/Y)(B/CB/PB)(H)(V)

• When BNC (RGB) is selected (*)

Analog output RGB OUT

DVI input DVI

AUDIO IN 1

Linked to RGB or DVI port input

Audio input from computer

USB mouse control USB

PS/2 mouse control

ADB mouse control ADB mouse cable

Serial mouse control Serial mouse cable

RS-232C communications RS-232C adapter + RS-232C cable

S video input S-VIDEO IN S-video cable (mini DIN 4-pin jack)

Video input VIDEO IN Audio/video cable

Component video input

Audio input from video equipment

Audio output AUDIO OUT Audio cable (Stereo mini)

Wired remote control signal input

•

AUDIO IN 2

Linked to BNC (RGB) port input (*)

•

CONTROL

COMPONENT(CR/PR)(CB/PB)(Y)

BNC(R/CR/PR)(G/Y)(B/CB/PB)

• When BNC (COMPONENT) is selected (*)

AUDIO IN R,L

REMOTE CONTROL Audio cable (Stereo mini)

RGB cable (With D-sub 15-pin shrink jack and inch thread screws)

BNC cable

RGB cable (With D-sub 15-pin shrink jack and inch thread screws)

DVI cable

Audio/video cable (Stereo mini)

USB cable

PS/2 mouse cable

Component video cable

Audio/video cable or audio cable (RCA jack)

* Before using the BNC port, change RGB input to component video input on the BNC menu item of

the INPUT menu.

NOTE

•

This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting

About Plug-and-Play Capability

this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).

• Please use the standard drivers as this projector is a Plug-and-Play monitor.

CONNECTING YOUR DEVICES (continued)

Connecting to a Computer

ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

DVI

RGB

RGB OUT CONTROL

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

RGB cable

Laptop computer

Analogue

RGB OUT

CR/PR

Ca/Pa

VIDEO INR-AUDIO IN-L

AUDIO OUT

REMOTE CONTROL

COMPONENT VIIDEO

S-VIDEO IN

AUDIO cable

(Stereo mini)

DVI

A B

RGB OUT CONTROL

RGB

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

RGB cable

Analogue

RGB OUT

Desktop computer

CR/PR

Ca/Pa

MOUSE cable

CONTROL OUT

REMOTE CONTROL

COMPONENT VIIDEO

VIDEO INR-AUDIO IN-L

S-VIDEO IN

AUDIO cable

(Stereo mini)

AUDIO OUT

USB OUT

USB cable

If connecting to a USB port equipped computer

NOTE

• Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

• For some RGB input modes, the optional Mac adapter is necessary.

Connecting to a Computer (continued)

BNC Input DVI Input

DVI

RGB

RGB OUT CONTROL

R/PR G/Y B/Ca/Pa H V

R/C

A A A A A

BNC AUDIO IN USBAUDIO OUT

BNC cable

BNC OUT

CR/PR

Ca/Pa

VIDEO INR-AUDIO IN-L

REMOTE CONTROL

COMPONENT VIIDEO

S-VIDEO IN

AUDIO cable

(Stereo mini)

AUDIO OUT

DVI

RGB

RGB OUT CONTROL

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

DVI cable

DVI OUT

Desktop computer Desktop computer

CR/PR

Ca/Pa

VIDEO INR-AUDIO IN-L

REMOTE CONTROL

COMPONENT VIIDEO

S-VIDEO IN

AUDIO cable

(Stereo mini)

AUDIO OUT

CONNECTING YOUR DEVICES (continued)

VIDEO INR-AUDIO IN-L

S-VIDEO IN

RGB

BNC AUDIO IN USBAUDIO OUT

R/C

R/PR G/Y B/Ca/Pa H V

DVI

RGB OUT CONTROL

CR/PR

Ca/Pa

COMPONENT VIIDEO

REMOTE CONTROL

A A A

If using a S-video connection

AUDIO/VIDEO

OUT

S-VIDEOOUT

AUDIO/VIDEO cable

S-VIDEO cable

Connecting to a DVD Player

REMOTE

DVI

RGB OUT CONTROL

RGB

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

CR/PR

Ca/Pa

A A A

B B B

VIDEO INR-AUDIO IN-L

CONTROL

COMPONENT VIIDEO

S-VIDEO IN

COMPONENT VIDEO cable

AUDIO/VIDEO cable

S-VIDEO cable

COMPONENT OUT

AUDIO/VIDEO OUT

If using a S-video connection

S-VIDEO OUT

Ifusingacomponent videoconnection

Ifusinganaudio/video connection

DVD player

Connecting to a Display Monitor

Connecting to a VCR

VCR

RGB

R/PR G/Y B/Ca/Pa H V

R/C

DVI

RGB OUT CONTROL

BNC AUDIO IN USBAUDIO OUT

RGB cable

Display monitor

REMOTE CONTROL

CR/PR

COMPONENT VIIDEO

Ca/Pa

VIDEO INR-AUDIO IN-L

S-VIDEO IN

RGBIN

+ 44 hidden pages