Ducasa Vitro-i 750 Black, Vitro-i 1200 White, Vitro-i 750 White, Vitro-i 1600 Black, Vitro-i 1200 Black Instructions For Operation And Installation

1

(v12 - 12012017)

VITRO

THIN MINERAL

The Vitro-i

Radiant / Convector Combination Heater

Instructions for Operation and Installation

(Read these instructions carefully and retain for further reference.)

Models:

Vitro-i 750 Black
Vitro-i 1200 Black
Vitro-i 1600 Black

Vitro-i 750 White
Vitro-i 1200 White
Vitro-i 1600 White

NOTE:

A qualied electrician must carry out the electrical installation of this heater. The
Electrical installation must comply with current UK regulations. Any claim on the

warranty could be invalid if these requirements have not been met.

E1400250

2

3

The Ducasa Vitro-i glass fronted designer heater provides a combination of radiant and convected heat and will grace
any home. With an LCD display the Vitro-i can be used as a standalone heater, or used in conjunction with the Smart
Command Heating Pack (optional).

Luxurious design with glass front panel (Black or White)

Double heating circuit: aluminium heater for convection heating and heating circuit on glass for radiant heat.

Designed and fabricated in accordance with EN60335-1 and EN 60335-2-30

NEC Class II

The heater requires a 230V. 50Hz power supply and is a double insulated product so does not require an earth cable.

Wall mounted (by quick xing system)

On-off main switch

Electronic digital thermostat with LCD screen

Standby, Comfort and Anti-frost settings

Keypad locking (anti-tamper) facility

Overheat protection

See Section “Installation Instructions – Location of Heater” for important notes regarding the
siting of the appliance.

Due to the surfaces of the heater becoming hot, it must not be positioned directly against or
below infammable surfaces.

Do not dry clothes or towels on the heater nor leave fabrics, magazines, spray cans, volatile
substances or similar objects within 250mm of the heater.

In case of breakdown or damage turn off the appliance at the main On/Off switch and notify

the supplier.

If the electricity cable gets damaged it must only be replaced by a technician appointed
by the supplier. This will avoid possible risks and ensure that special tools are available if

needed.

This appliance is not intended to be used by persons (incl. children) with limited physical,
sensory or mental capabilities, or who lack experience, except for those under supervision
or have received instruction in the use of the appliance from a person responsible for their

security.

Children must be supervised in order to ensure that they do not play with the appliance.

WARNING: In order to prevent overheating, do not cover this appliance.

There has to be free movement of air around all surfaces of the appliance.

This symbol “DO NOT COVER”, is placed on the heater as a reminder

to the user.

GENERAL INFORMATION

1. IMPORTANT INFORMATION

4