Ducasa VITRO 750 Black, VITRO 1200 Black, VITRO 1600 Black, VITRO 750 White, VITRO 1200 White Operation Manual

4.C24(05/13)

DUCAVERRE

DUCAVERRE INERTIE

MINERAL DUCAFONTE

DUCACERAM

NOTE:

A qualied electrician must carry out the electrical installation of this radiator. The

Electrical installation must comply with current UK regulations. Any claim on the

warranty could be invalid if these requirements have not been met.

The Vitro

Radiant / Convector Combination Heater

Instructions for Operation and Installation

(Read these instructions carefully and retain for further reference.)

Models:

VITRO 750 Black
VITRO 1200 Black
VITRO 1600 Black

VITRO 750 White
VITRO 1200 White
VITRO 1600 White

The Ducasa Vitro glass fronted designer heater provides a combination of radiant and convected heat and will grace
any home. With touch sensitive adjustment and LCD display the Vitro can be used as a stand alone heater, as a part of
a zoned pilot wire system (optional) or programmed via the Ducasa remote controller (optional).

Luxurious design with glass front panel (Black or White)

Double heating circuit: aluminium heater for convection heating and heating circuit on glass for radiant heat.

Designed and fabricated in accordance with EN60335-1 and EN 60335-2-30

NEC Class II

The radiator requires a 230/240V 50Hz power supply and is a double insulated product so does

not require an earth cable.

Wall mounted (by quick xing system)

On-off main switch

Electronic digital thermostat with LCD screen

Standby, Comfort and Anti-frost settings

2 Hour Turbo Mode

Keypad locking (anti-tamper) facility

Overheat protection

Connectable to a central programming system by pilot wire if required

Programmable by infrared control (Ducasa Remote) - optional

See Section “Installation Instructions – Location of Heater” for important notes regarding the siting of the appliance.

Due to the surfaces of the heater becoming hot, it must not be positioned directly against or below infammable
surfaces.

Do not dry clothes or towels on the heater nor leave fabrics, magazines, spray cans, volatile substances or similar
objects within 250mm of the heater.

In case of breakdown or damage turn off the appliance at the main On/Off switch and notify the supplier.

If the electricity cable gets damaged it must only be replaced by a technician appointed by the supplier. This will avoid
possible risks and ensure that special tools are available if needed.

This appliance is not intended to be used by persons (incl. children) with limited physical, sensory or mental capabilities,
or who lack experience, except for those under supervision or have received instruction in the use of the appliance from
a person responsible for their security.

Children must be supervised in order to ensure that they do not play with the appliance.

WARNING: In order to prevent overheating, do not cover this appliance. There has to be free

movement of air around all surfaces of the appliance.

This symbol “DO NOT COVER”, is placed on the heater as a reminder to the user.

GENERAL INFORMATION

1. IMPORTANT INFORMATION

ELECTRICAL CONNECTION

A qualifed electrician must carry out the electrical installation of this radiator. The electrical installation must comply with
the current UK regulations. Any claim on the warranty could be invalid if these requirements have not been met.

The radiator requires a 230/240V 50Hz power supply and is a double insulated product so does not require an earth
cable.

CONNECTING WIRES

L = Live → Brown
N = Neutral → Blue
FP = Pilot Wire → Black (if required for external programmer)

IF PILOT WIRE IS NOT REQUIRED INSULATE BLACK CABLE TO ENSURE IT DOES NOT COME INTO CONTACT
WITH ANY OTHERS WIRES OR TERMINALS.

The connecting wires must be of the appropriate section, in regards to the length of cable, type of cable and power rating
of the apparatus.
The apparatus must be connected into a connecting box.
We recommend that the connecting box is positioned 10cm to the right of the apparatus and at 15cm above the oor.
According to regulations, the apparatus must be connected to the power supply by means of an all-pole circuit breaker
with a contact gap of at least 3mm or by a thermal-magnetic circuit breaker.

LOCATION

The ideal place to site the Ducasa radiator is as close as possible to coolest wall in the room but it is not recommended to
site the radiator on un-insulated exterior walls, in this case, the part of the wall behind the radiator should be insulated.
In bathrooms, the radiators must not be sited inside the protected area. The control unit switches must not be reachable,
directly or indirectly, by a person in the bath or shower.
The radiator, under no circumstances, should be installed below an electric power point.
Choose the location of the radiator in respect of the minimum distances that are indicated below.

3. INSTALLATION INSTRUCTIONS

2. TECHNICAL DATA

MODEL

Vitro 750 Vitro 1200 Vitro 1600

Power (w) 750 1200 1600

Voltage 230V /1Ph /50Hz

Dimmensions WxHxD(mm.) 670x500x110 840x500x110 1000x500x110

CLASS II II II

gure 2