Dual DSA1007 User Manual

DSA1007

INSTALLATION/OWNER’S MANUAL

DVD Multimedia Receiver with 7” Touch Screen Display

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

Copyright Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

DVD logo is a trademark of DVD Format/Licensing Corporation registered in the U.S., Japan and other countries.

SD logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their respective owners.

DSA1007 PREPARATION

Table of Contents

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remote Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MP3/WMA/JPG Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auxiliary Inputs/Rear Camera Operation. . . . . . . . . . . . . . . . . . . . . . . . . .

Page

3

4

5

6

7

8

9-10

11-12

13-14

15-21

22-26

27

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

29

30

2

DSA1007 PREPARATION

WARNING

Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle

must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from

the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the

parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire (“Pink Lead”) to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to

disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s

occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

3

DSA1007 OPERATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL DSA1007 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

• Make sure to ground the unit securely to the vehicle chassis ground.

• Do not remove the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

• Do not subject the unit to excessive shock.

• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may

cause the unit to malfunction.

• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

• Use only the provided hardware and wire harness.

• You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

• If you experience problems during installation, consult your nearest DUAL dealer.

• If the unit malfunctions, reset the unit as described on page 9 first. If the problem still persists, consult your

nearest DUAL dealer or call tech assistance @ 1-866-382-5476.

• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents

such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than

usual. Normal brightness will return after using the monitor for a while.

• When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap

immediately.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

4

DSA1007 INSTALLATION

Preparation

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.

• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.

• Install mounting sleeve into opening, bending tabs to secure.

• Connect wiring harness as shown on page 6. Consult a qualified technician if you are unsure.

• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).

• Reconnect negative battery terminal, and test for correct operation.

• Snap trim ring into place (if required).

• Slide unit into mounting sleeve to secure.

Mounting sleeve opening dimensions

7-3/16” x 2-1/16” (183 mm x 53 mm)

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

5

Fr

Grey/Black

DSA1007 INSTALLATION

Wiring Diagram - Inputs/Outputs

Rear Right Channel (Red)

Rear Left Channel (White)

Front Right Channel (Red)

ont Left Channel (White)

AuxIn Left (White)

AuxIn Right (Red)

Subwoofer

Video Input (Yellow)

Video Output (Yellow)

Camera Input (Purple)

Radio Antenna Connector

Wiring Notes:

Subwoofer output The Subwoofer preamp audio output (black jacket with green RCA) is active in all audio modes.

Rear camera input

A rear view camera (not included) can be used with the Camera input. Refer to page 29 for details.

Note:

When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could damage

the unit. The DSA1007 uses (1) 15 amp ATC mini style fuse located on the back of the unit.

RCA Cable

Front Speaker

Left Channel

Rear Speaker

Left Channel

Rear Speaker Right Channel

Front Speaker Right Channel

Grey

Brown

Black Black

Black

Grey

Black

White

White/Black

Green

Green/Black

Purple

Purple/Black

Grey

Main Unit

Pink

Orange

Blue/Black

Blue

Orange/Black

Red

Black

Yellow

Brake

Camera (B+)

Amp Control

Power Antenna

Illumination Control

Ignition Switch (B+)

Ground (B-)

Memory Backup

6

DSA1007 OPERATION

Control Locations

7

2

3

Audio

16

Number Keys

17

GOTO

18

EQ / Loudness

19

Root

20

OSD

21

Local / Random

22

Tune / Track Down

23

AS/PS / Repeat

24

ST / Program

25

Stop

26

Arrow Down

27

Arrow Left

28

Enter

29

Band

30

Arrow Up

31

4

5

6

1

17

16

15

11 91014 1213

Release

1

Eject

2

Auxiliary A/V Input

3

Band

4

USB Port

5

Mute

6

Tuning Knob

7

Reset

8

9

Preset 6 / Screen Angle Up

1 2 3 4

31

30

29

28

27

26

25

24

23

22

21

20

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

10

11

12

13

14

15

16

17

Power

1

Mode

2

Play / Pause

3

Mute

4

Title

5

Subtitle

6

Arrow Right

7

Setup

8

Angle

9

Slow

10

Volume Up

11

Zoom

12

Select

13

Tune / Track Up

14

Volume Down

15

8

Preset 5 / Screen Angle Down

Preset 4 / Stop

Preset 3 / Random

Preset 2 / Repeat

Preset 1 / Play / Pause

Mode

Volume Knob

Power / Open

7

DSA1007 OPERATION

Remote Control Preparation

Remove battery insulation tape .

To insert or replace the battery,

remove the battery holder.

Remove the battery from the

battery holder.

Install the new battery.

Make sure to keep the (+) side up.

Notes:

• The remote control uses one 3 volt Lithium CR2025 battery. Remove the battery if the remote will not be used for a month or longer.

• Remove and dispose of battery properly.

• Do not store battery with metallic objects or materials.

Insert the battery holder .

8

DSA1007 OPERATION

General Operation

Power / Open

Volume

Volume Memory

Mute

Mode

Reset

3.5mm A/V Input

USB Port

Main Menu

Momentarily press to turn the unit off. When the unit is on, pressing monitor.

Rotate the volume knob to increase or decrease the volume level (0-39).

If the volume level is <21 when the unit is turned off, it will be retained in memory the next time the unit is turned on. If the volume level is >20 when the unit is turned off, the volume level will automatically default to 20 the next time the unit is turned on.

Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the

volume is muted will also cancel the mute function.

Press MODE to step through all available input modes: Tuner, Disc (which

includes DVD and CD playback), SD, USB, AV1 and AV2. Modes of operation are indicated on the display and/or the monitor. Optional USB flash drive and SD

card must be connected/inserted to appear in the mode selection string.

To resolve abnormal operation or if the unit is inoperable, use the tip of a pen to press the RESET button. The unit will reset the main processor to the default

settings.

Connect external audio/video devices to the 3.5mm auxiliary A/V input on the front panel.

Connect a USB device to play MP3/WMA files or view JPG photos. The DSA1007's USB port supports USB playback only. To connect a phone or other device for charging, use the USB port on the back of the unit.

When the monitor is open, press the arrow in the top right corner to access the Main Menu screen.

to turn the unit on. Press and hold for 2 seconds

will open or close the

From the Main Menu screen:

- View/select any operational mode by touching the corresponding icon.

- Enter standby mode by pressing STANDBY.

- Use the up and down arrows to adjust the angle of the screen

- Select SETUP to enter the Setup menu.

9

DSA1007 OPERATION

General Operation

Setup Menu

From the Main Menu screen, press SETUP in the bottom left corner to access

the Setup menu. Select one of the seven icons across the top (General, Time, Language, Audio, Video, Tuner and Calibration) to access the sub-menu for

that category. Use the up and down arrow keys on the right to scroll up and down through the available sub-menu options.

General

• Beep - Select Off or On

• Camera - Select a Normal or Mirror image for camera input.

Time

• Time - Press the current time to edit, then use the up and down arrows

to change the hour and minute settings.

• Year - Press the current year to edit, then use the up and down arrows

to increase or decrease the value.

• Month - Press the current month to edit, then use the up and down

arrows to increase or decrease the value.

• Day - Press the current day to edit, then use the up and down arrows to

increase or decrease the value.

Language

• Language - Select desired language (this option is available only on

certain models).

Audio

• Subwoofer - Turn the Subwoofer output On or Off.

• Loudness - Turn the Loudness function On or Off.

• EQ - Select from EQ options: Pop, Rock, Classic, Jazz or Off.

Video

• Aspect Ratio - Select one of the following ratios: 4:3LB, 4:3PS or 16:9.

• Brightness - Adjust the brightness level from 0-14 (default is 7).

• Contrast - Adjust the contrast level from 0-14 (default is 7).

• Saturation - Adjust the saturation level from 0-14 (default is 7).

• Hue - Adjust the hue from 0-14 (default is 7).

• Standard Video - Press "Yes" to reset video adjustments to default

values.

Tuner

• Radio Region - Set the unit for one of the following regions: Europe, America 1, America 2, Japan or Russia,

Calibration

• Calibration - Press SELECT to begin calibration of the touch screen.

Press the center of the + as indicated on the screen to calibrate the touchscreen.

to disable or enable the audible beep.

10

DSA1007 OPERATION

AM/FM Tuner Operation

Tuner Operation

Current Mode Indicator

Tune Frequency Down

Information Display

Tune Frequency Up

Main Menu Access

Preset Station Display

11

EQ

Local

Loudness

1 32 4

9

8

Select the Tuner icon from the Main Menu screen or press MODE until Tuner is selected. The following instructions outline tuner operation using the touch screen monitor; however, the tuner can also be controlled using the buttons on the face of the radio when the monitor is closed.

Displays current mode of operation.

1

Press momentarily to manually tune to a lower frequency. Press and hold to

2

seek tune to the previous strong station.

Displays information such as Loudness and EQ settings.

3

Press momentarily to manually tune to a higher frequency. Press and hold to

4

seek tune to the next strong station.

Press to return to Main Menu screen.

5

Displays the six preset stations stored in memory in the current band. Press

6

any preset station to play it instantly. Up to 18 FM and 12 AM stations can be stored in memory.

Press EQ to step through the following EQ options: Pop, Rock, Classic, Jazz

7

or Off.

Press LOC to select between Local (LOC ON) and Distance (LOC OFF) tuning

8

options. The local option tunes to nearby radio stations with sufficiently strong signals for good reception. In areas where reception is poor, switching to distance tuning enables the unit to tune in to more distant stations. Distance tuning is the default tuning mode.

Press LOUD to turn the Loudness feature On or Off.

9

5

7

6

DSA1007 OPERATION

AM/FM Tuner Operation

13

Automatically Store /

Preset Scan

Select

Band

Mute

10

11

12

13

11

12

Press and hold AS/PS to automatically find and store the strongest stations as presets. Press AS/PS momentarily to scan preset stations and play 10 seconds of each.

Note: To manually save preset stations, tune to the desired station, then press and hold the desired preset number in the preset station display. The stored preset station will appear next to the preset number when saved.

Press SEL to access Audio and Video setup menus.

Audio Setup

• Volume - Adjust volume level from 0-39.

• Bass - Adjust bass level from -7 to 7.

• Treble - Adjust treble level from -7 to 7.

• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents

equal balance.

• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents equal

fader.

Video Setup

• Brightness - Adjust brightness level from 0-14 (7 is the default).

• Contrast - Adjust contrast level from 0-14 (7 is the default).

• Saturation - Adjust saturation level from 0-14 (7 is the default).

• Hue - Adjust hue from 0-14 (7 is the default).

Press BAND to toggle between AM and FM frequency bands.

Press MUTE to silence the radio. Press MUTE again to return to listening at the previously-selected volume.

10

12

DSA1007 OPERATION

CD Operation

1

8

CD Operation

Current Mode Indicator

Elapsed Time Indicator

Track Indicator

Scroll Up / Down Arrows

Volume Indicator

CD Track List

Main Menu Access

Play / Pause

13

Stop

2

9

1

2

3

4

5

6

7

8

9

3

Insert disc into the slot with the label facing up at a slight upward angle, and playback will

been inserted and the unit has been operating in another mode, resume disc playback by selecting the DISC icon from the Main Menu screen or pressing MODE until DISC is selected.

The following instructions outline tuner operation using the touch screen monitor; however, the tuner can also be controlled using the buttons on the face of the radio when the monitor is closed.

Displays current mode of operation.

Displays the elapsed time of the current track.

Displays the current and total number of tracks on the disc.

Press to scroll up or down the pages in the track playlist.

Displays the current volume setting of the unit.

Displays the first five tracks on the CD. Use the arrow keys to scroll down and up through the entire list, or press a track number to play it instantly. Elapsed time of current track will be displayed when playback begins.

Press to return to Main Menu screen.

Press to pause CD. Press again to resume CD playback.

Press  to temporarily stop playback. Press play to resume playback from the current position. Press  a second time to fully stop playback. Press play to begin playback from the beginning of the disc.

4 5

begin automatically. If a disc has previously

6

7

DSA1007 OPERATION

CD Operation

Fast Reverse

Fast Forward

Previous Track

Next Track

Volume / Audio Settings

Additional Options

Time Indicator

Repeat

Direct Track Access

Random

Intro

TFT Screen

131110 12 1514 16

Press to fast reverse CD playback. Each touch changes speed from 2x

10

to 4x to 8x to 16x to 20x then back to regular playback.

Press to fast forward CD playback. Each touch changes speed from 2x

11

to 4x to 8x to 16x to 20x then back to regular playback.

Press to go back to the previous track.

12

Press to advance to the next track.

13

Press to display and adjust the current volume level from 0 to 39. Touch VOL

14

to step through the following audio settings:

• Bass- Adjust bass level from -7 to 7.

• Treble - Adjust treble level from -7 to 7.

• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents

• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents

Press to access additional CD playback options.

15

Press to toggle from displaying the elapsed time to displaying the remaining

16

time of the current track.

Press to step through the Repeat options: RPT ONE (repeats current song),

17

RPT ALL (repeats all songs on disc) and OFF.

Press to access numeric keyboard to select desired track number. Input

18

track number, press OK and playback of selected track will begin.

Press to turn Random play ON or OFF.

19

Press to play the first 10 seconds of each song on the disc. Press again to

20

return to sequential play.

Press to turn off the TFT display. Press anywhere on the touch screen to

21

turn the display back on.

equal balance.

equal fader.

1817

19

20

21

14

DSA1007 OPERATION

MP3/WMA/JPG Operation

1

MP3/WMA/JPG Playback from Disc, USB Device or

Navigation Button

Current Mode Indicator

Information Display

Main Menu Access

SD Card

File Indicator

OSD Controls

Elapsed Time

2

To play MP3, WMA and JPG files from a disc, USB device or micro SD card. Insert disc, connect USB device or insert SD card, and playback will begin automatically. To return to disc, USB or SD card playback from another mode of operation, select the DISC, USB or SD icon from the Main Menu screen or

top icon display, or press MODE until DISC, USB or SD is selected.

• Using a Cable - Connect a USB device to the black USB input cable.

• Using an SD Card - Insert SD card with the label facing up into the SD

slot located behind the face of the unit.

Note: It is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction. The JPG image viewer function will only operate when vehicle is in Park and the parking brake is engaged as described on page 22.

Each press of this button navigates up through the following menus and

1

folders: Folder Menu (list of all songs in folder), Device Menu (list of all folders) and Playback Menu (select between Music or JPG).

Indicates current file and the total number of files in the current folder.

2

3

Press to view the OSD controls.

Displays current mode of operation.

4

5

Scrolls through available file information, including file name, song title, artist name and album name.

Press to return to Main Menu screen.

6

7

Displays the elapsed time of the current track.

3

4 5

6

7

15

DSA1007 OPERATION

MP3/WMA/JPG Operation

15

Additional Options

Volume / Audio Settings

Next Track

Previous Track

Fast Forward

Fast Reverse

Stop

Play / Pause

14

8

Press to access additional playback options.

9

Press to display and adjust the current volume level from 0 to 39. Touch VOL to step through the following audio settings:

• Bass- Adjust bass level from -7 to 7.

• Treble - Adjust treble level from -7 to 7.

• Balance - Adjust balance from Left (L07) to Right (R07); "00" represents

equal balance.

• Fader - Adjust fader from Front (F07) to Rear (R07); "00" represents equal fader.

Press to advance to the next file.

10

Press to go back to the previous file.

11

Press

12

to 4x to 8x to 16x to 20x then back to regular playback.

Press to fast reverse file playback. Each touch changes speed from 2x

13

to 4x to 8x to 16x to 20x then back to regular playback.

Press  to temporarily stop playback and return to the current folder menu.

14

Press to pause playback. Press again to resume playback.

15

12

13

to fast forward file playback. Each touch changes speed from 2x

10

11

9

8

16

DSA1007 OPERATION

MP3/WMA/JPG Operation

Additional Options

Direct Song Access

17

20

TFT Screen

Repeat

Random

18

19

Press to return to original OSD option display.

16

Press to access numeric keyboard to select desired song number. Input

17

song number, press OK and playback of selected song will begin.

Press to turn off the TFT display. Press anywhere on the touch screen

18

to turn the display back on.

Press to step through the Repeat options: RPT ONE (repeats current

19

song), RPT Folder (repeats all songs in current folder), RPT ALL (repeats all songs on device) and OFF.

Press to turn the Random function ON or OFF.

20

17

16

DSA1007 OPERATION

MP3/WMA/JPG Operation

Viewing JPEG Images

Play / Pause

Stop

Previous Photo

Next Photo

Additional Options

When viewing JPG images, press Area E to display on-screen JPG controls.

Area E

1

2

Press to pause slideshow at current image. Press again to resume.

1

Press to stop slideshow and return to photo menu.

2

Press to go back to the previous image.

3

Press to advance to the next image.

4

Press to access additional photo options.

5

Area E

3 5

4

Area E

Repeat

Direct File Access

Zoom

TFT Display

7 8

6

Press to step through the Repeat options: RPT ONE (repeats current image),

6

RPT FOLDER (repeats all images in the current folder), RPT ALL (repeats all images on the disc or device) and OFF.

Press to access numeric keyboard. Input file number, press OK and

7

playback of selected file in the current folder will begin.

Press to zoom in (2x, 3x, 4x) or out (1/2x, 1/3x, 1/4x) on the selected image

8

or turn the zoom feature off.

Press to turn off the TFT display. Press anywhere on the touch screen to

9

turn the display back on.

9

18

DSA1007 OPERATION

Media Compatibility - USB/SD Card

File Type WMA MP3

File System

File

Extension

MPEG

Format

Sampling

Frequency

Bitrate

Other

Information

Notes:

• Due to ongoing technological advancement, some USB flash drives and/or SD cards may be incompatible with this unit.

FAT

.mp3/.MP3/.Mp3/.mP3 X

.wma/.WMA

.rm p/.m4 a X X

Directory Depth Unlimited Unlimited

File Name Length 32 bytes 32 bytes

Total File Number 2000 files 2000 files

Total Folder Number 200 folders 200 folders

File Number via Folder 2000 files 2000 files

MP3 ID3 TAG

WMA TAG Title, Artist

FAT 12 X X

FAT 16/ FAT 3 2

MPEG 1 X

MPEG 2 X

MPEG 2.5 X

MPEG 1 X 32/44.1/48kHz

MPEG 2 X 12/16/22.05/24kHz

MPEG 2.5 X 8/11.025/12kHz

WMA 32/44.1/48kHz X

MPEG 1 X 32 ~ 320 kbps

MPEG 2 X 8 ~ 160kbps

MPEG 2.5 X 8 ~ 160kbps

WMA 32 ~ 192kbps X

ver.1.x X

ver.2.x X

Title, Artist, Album X

 



X



X

19

File System

File

Extension

MPEG

Format

Sampling

Frequency

Bitrate

Other

Information

DSA1007 OPERATION

Media Compatibility - CD/DVD

File Type WMA MP3

ISO9660

Extension

Other

Extensions

.mp3/.MP3/.Mp3/.mP3 X

Total Folder Number 200 folders 200 folders

File Number via Folder 2000 files 2000 files

MP3 ID3 TAG

WMA TAG Title, Artist

Level 1, Level 2

Level 3 X X

JOLIET

ROMEO

.wma/.WMA

.rm p/.m4 a X X

MPEG 1 X

MPEG 2 X

MPEG 2.5 X

MPEG 1 X 32/44.1/48kHz

MPEG 2 X 12/16/22.05/24kHz

MPEG 2.5 X 8/11.025/12kHz

WMA 32/44.1/48kHz X

MPEG 1 X 32 ~ 320 kbps

MPEG 2 X 8 ~ 160kbps

MPEG 2.5 X 8 ~ 160kbps

WMA 32 ~ 192kbps X

Directory Depth Unlimited Unlimited

File Name Length 32 bytes 32 bytes

Total File Number 2000 files 2000 files

Title, Artist, Album X

Playback

Filename 32 bytes 32 bytes

Playback X X

Filename X X

Apple ISO X X

ver.1.x X

ver.2.x X

 



X



X

20

DSA1007 OPERATION

Media Compatibility

Playback Order

Compatible Recording Formats

Additional MP3/WMA Information

Notes

The following types of discs are compatible:

• CD-DA, CD-ROM (ISO), CD-R, CD-RW

• DVD Video, DVD+R/RW, DVD-R/RW

The following types of discs/files are not compatible:

• WMA files that are protected by DRM (Digital Rights Management)

• WMA lossless format

• Discs recorded with Track At Once or packet writing

• MP3 PRO format, MP3 playlists

• RMP format

• WAV format

• WMV format

• DivX, Xvid format

• AVI format

• MPG, MPEG-4 format

• AAC, protected AAC, M4A format

Some recordable DVD's and CD's may be incompatible with this unit, depending on media type and recording method.

MP3/WMA playback sequence begins in the root folder of the disc, USB flash

drive or SD card. Any empty folders or folders that do not include MP3/WMA/ JPG files are skipped.

ISO9660 standards:

• Maximum nested folder depth is 8 (including the root folder).

• Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and “_” (underscore). Some characters may not be displayed correctly,

depending on the character type.

• This device can play back discs in Joliet and other standards that conform

to ISO9660. MP3/WMA written in the formats other than the above may not play and/or their file names or folder names may not be displayed properly.

An internal buffer provides ESP (Electronic Skip Protection) to virtually

eliminate skipping.

When playing a disc recorded with regular audio files (CD-DA or .WAV) and

MP3/WMA files, the unit will play the MP3/WMA files only.

Some files may not play or be displayed correctly, depending on sampling rates and bit rates.

For best results, use the following settings when ripping MP3 files:

128kbps or higher constant bit rate

44.1kHz or higher sampling frequency

For best results, use the following settings when ripping WMA files:

64kbps or higher constant bit rate

44.1kHz or higher sampling frequency

21