DUAKNE 8942 User Guide
PLEASE READ
We are in no way responsible for the
contents of the manual. We do not guarantee
its accuracy and we do not make any claim
of copyright. The copyright remains the
property of their respective owners.
Visit the site to read the latest projector
news and reviews, read and comment on
projector specifications, download user
manuals and much more.
Liquid Crystal Projector
Models 8935/8942
USER'S MANUAL
Please read this user's manual thoroughly
to ensure correct usage through understanding.
Projector
8935/8942
8935/8942
User's Manual - Operating Guide
User's Manual - Operating Guide
Thank you for purchasing this projector.
WARNING Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
LAMP
TEMP
ON
/
STANDBY
VIDEO
U
N
ME
S-VIDEO
R
E
M
T
O
IN
ZO
FOCUS
T
N
SET
E
R
COMPONE
BNG
T
NPU
I
RGB
SEARCH
S SHIFT
N
LE
M1-D
NE
KEYSTO
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
1
Projector Features
Projector Features
This multimedia projector is used to project various computer signals as well as
NTSC/PAL/SECAM video signals onto a screen. Little space is required for
installation and large images can easily be realized.
Ultra High Brightness
●
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly
efficient optical system.
Whisper Mode Equipped
●
Special mode is available for reducing projector noise to achieve quieter operation.
User Memory Function
●
This projector can memorize 4 settings by MY MEMORY function.
Partial Magnification Function
●
Interesting parts of images can be magnified for closer viewing.
Keystone Distortion Correction
●
Quick correction of distorted images electrically.
Optical Lens Shift
●
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position,
use the LENS SHIFT buttons.
Preparation
Preparation
Please see the “Contents Of Package” on page 1.
Your projector should come with the items shown there. Contact your dealer
anything is missing.
NOTE
sure to use the original packing material. Use special caution for the lens part.
2
• Keep the original packing material for future reshipment. For moving the projector, be
Contents
Contents
Projector Features
Preparation
Part Names
Projector ……………………………4
Control Buttons ……………………5
Remote control ……………………5
Setting Up
Arrangement ………………………6
Adjusting The Projector’s
Elevator ……………………………7
Using The Lens shift Buttons ……7
Connecting Your Devices…………8
Connecting The Power Supply …11
Remote Control
About The Laser Pointer ………12
Putting Batteries …………………12
Operating The
Remote Control …………………13
Using The Remote
ID Feature…………………………13
Using The Mouse/Keyboard
Control Function …………………14
Power ON/OFF
Turning On The Power …………15
Turning Off The Power …………15
Operating
Selecting An Input Signal ………16
Selecting The Aspect Ratio ……17
Using The Automatic
Adjustment Feature………………17
Adjusting The Picture Position …18
Correcting The Keystone
Distortion …………………………18
Adjusting The Volume …………19
Muting The Sound ………………19
Temporarily Blanking
The Screen ………………………19
Freezing The Screen ……………20
Using The Magnify Feature ……20
Displaying The Child Window …21
Selecting An Audio Input ………21
…………………………………………………………
……………………………………………………
……………………………………
……………………………………………………
……………………………………………………
…………………………………………
…………………………………………
12
15
16
2
Multifunctional Settings
2
4
6
Using The Menu Functions ……22
MAIN Menu ………………………23
PICTURE-1 Menu ………………24
PICTURE-2 Menu ………………26
INPUT Menu ……………………27
AUTO Menu ………………………29
SCREEN Menu …………………31
OPTION Menu ……………………33
NETWORK Menu ………………35
Network Setting Up
Lamp
Air Filter
Other Care
Troubleshooting
Warranty And After-Service
Specifications
TECHNICAL
………………………………………………………………
Replacing The Lamp ……………38
…………………………………………………………
Caring For The Air Filter…………39
……………………………………………………
Caring For The Inside Of
The Projector ……………………40
Caring For The Lens ……………40
Caring For The Cabinet And
Remote Control …………………40
Related Messages ………………41
Regarding The Indicator
Lamps ……………………………43
Phenomena That May Easily Be
Mistaken For Machine Defects …45
……………………
………………………………
……………………………………
…………
…………………………………………
22
36
37
39
40
41
47
47
3
Part Names
Part Names
Projector
5
4
Projector (Front/Right)
8
7
L
REMOTE CONTROL
RGB
AUDIO OUT
RGB OUT
/P
R
G/Y
B/C
B
/P
BNC
CR/PR
B
H
V
R-AUDIO IN-L
M
H
Projector (Rear/Left)
D
E
A
B
AUDIO IN1
AUDIO IN2
R/C
C
R
Ca/Pa
I
LENS SHIFT
VIDEO
COMPONENT
VIDEO
F
CONTROL
Y
LAMP
TEMP
STANDBY/ON
VIDEO
MENU
S-VIDEO
ZOOM
INTER
FOCUS
RESET
SEARCH
COMPONENT
BNG
INPUT
RGB
LENS SHIFT
M1-D
KEYSTONE
1 Elevator button
2 Elevator foot
3
6
3 Remote sensor
4 Lens cap
5 Lens
The picture is projected from
here.
1
6 Filter cover
An air filter is inside.
2
A RGB port
-
KEYSTONE
M1-D
RGB
SEARCH
INPUT
BNG
RESET
INTER
S-VIDEO
STANDBY/ON
TEMP
NETWORK
S-VIDEO
K
LAMP
G
FOCUS
ZOOM
MENU
3
J
09
B M1-D port
C BNC port
D
AUDIO IN 1 port
E AUDIO IN 2 port
F CONTROL port
G NETWORK port
H AUDIO IN R/L port
I VIDEO IN port
J S-VIDEO port
K COMPONENT port
L RGB OUT port
M AUDIO OUT port
7 REMOTE CONTROL port
8 DC OUT port
9 AC Inlet
0 Power switch
- Control buttons
See the following page.
4
Part Names (continued)
ENTER
INPUT
M1-D
RGB
BNC
S-VIDEO
STANDBY/ON
TEMP
VIDEO
COMPONENT
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENS SHIFT
ZOOM
1
e
w q
4
7
8
9
0
=
2
5
6
t
y
u
3
r
Part Names (continued)
Control Buttons
LAMP
TEMP
STANDBY/ON
VIDEO
MENU
S-VIDEO
INTER
ZOOM
FOCUS
RESET
COMPONENT
BNG
INPUT
RGB
SEARCH
LENS SHIFT
M1-D
KEYSTONE
Control Panel
on the Projector
Remote Control
1 STANDBY/ON button
and STANDBY/ON indicator
2 TEMP indicator
3 LAMP indicator
4 LENS SHIFT buttons
5 INPUT dial
6 SEARCH button
7 M1-D indicator
8 RGB indicator
9 BNC indicator
0 COMPONENT indicator
- S-VIDEO indicator
= VIDEO indicator
q ZOOM buttons
w FOCUS buttons
e KEYSTONE button
r MENU button
t RESET button
y ENTER button
u Cursor buttons / / /
1 STANDBY/ON button
4 LENS SHIFT buttons
6 SEARCH button
q ZOOM buttons
w FOCUS buttons
e KEYSTONE button
r MENU button
t RESET button
y ENTER button
( Mouse left button)
u Cursor buttons
( Keyboard
Arrow keys / / / )
y
(Rear)
///
i
STANDBY/ON
1
q
LENS SHIFT
4
BLANK
w
PREVIOUS
u
r
s
ESC MENU
POSITION
f
MAGNFY
h
OFF
j
k
e
Remote Control
LASER INDICATOR
VIDEO
RGB
+
++
FOCUS ZOOM
–––
ON
ASPECT
ENTER
RESET AUTO
PinP
FREEZE MUTE
KEYSTONE
1 2 3
ID CHANGE
LASER
NEXT
VOLUME
SEARCH
o
p
[
\
]
a
d
t
g
l
;
6
'
i LASER INDICATOR
o VIDEO button
p RGB button
[ BLANK button
] ASPECT button
\ LASER button
a Cursor buttons / / /
( Mouse move pointer)
s ESC button
( Keyboard ESC key)
d ( Mouse right button)
f POSITION button
g AUTO button
h PinP button
j MAGNIFY buttons
k FREEZE button
l VOLUME button
; MUTE button
' ID CHANGE switch
5
Setting Up
b
m
a
n
Setting Up
Arrangement
WARNING • Before installation, make sure that the projector is turned off and the
power code is disconnected.
• Do not set up and move the projector, while it is hot.
• Install the projector in a suitable environment according to instructions of the “User’s
Manual – Safety Guide” and this manual.
• The power outlet should be close to the projector and easily accessible.
Refer to the illustrations and tables below to determine the screen size and projection
distance. The values shown in the table are calculated for a full size screen. (±10%)
Reference for
the 4:3 aspect ratio
Screen
Lens center
Reference for
the 16:9 aspect ratio
Screen
Lens center
b
m
n
a
Side View
Side View
Screen Size
[inch (m)]
40 (1.0) 46(1.2) 71(1.8) 12(30) 24(61)
60 (1.5) 71(1.8) 107(2.7) 18(46) 36(91)
70 (1.8) 83(2.1) 126(3.2) 21(53) 42(107)
80 (2.0) 95(2.4) 144(3.7) 24(61) 48(122)
100 (2.5) 120(3.0) 181(4.6) 30(76) 60(152)
120 (3.0) 144(3.7) 217(5.5) 36(91) 72(183)
150 (3.8) 181(4.6) 272(6.9) 45(114) 90(229)
200 (5.1) 243(6.2) 364(9.2) 60(152) 120(305)
250 (6.4) 304(7.7)
300 (7.6) 366(9.3)
350 (8.9)
400 (10.2)
500 (12.7)
Screen Size
[inch (m)]
40 (1.0) 50(1.3) 77(2.0) 10(25) 23(58)
60 (1.5) 77(2.0) 117(3.0) 15(37) 34(87)
70 (1.8) 91(2.3) 137(3.5) 17(44) 40(102)
80 (2.0) 104(2.6) 157(4.0) 20(50) 46(116)
100 (2.5) 131(3.3) 197(5.0) 25(62) 57(145)
120 (3.0) 158(4.0) 237(6.0) 29(75) 69(174)
150 (3.8) 198(5.0) 297(7.5) 37(93) 86(218)
200 (5.1) 265(6.7)
250 (6.4) 332(8.4)
300 (7.6)
350 (8.9)
400 (10.2)
450 (11.4)
a [inch (m)] b [inch (cm)]
Min. Max.
455(11.6)
547(13.9)
427(10.9) 638(16.2)
489(12.4) 730(18.5)
612(15.5) 913(23.2)
a [inch (m)] b [inch (cm)]
Min. Max.
396(10.1)
496(12.6)
399(10.1) 596(15.1)
466(11.8) 696(17.7)
533(13.5) 795(20.2)
600(15.2) 895(22.7)
m:n=1:1 m:n=10:0
75(191) 150(381)
90(229) 180(457)
105(267)210(533)
120(305)240(610)
150(381)300(762)
m:n=1:1 m:n=10:0
49(125) 114(291)
61(156) 143(363)
74(187) 172(436)
86(218) 200(508)
98(249) 229(581)
110(280)257(654)
6
INTER
INPUT
M1-D
RGB
BNG
S-VIDEO
STANDBY/
ON
TEMP
VIDEO
COMPON
ENT
LAMP
KEYSTON
E
SEARCH
RESET
MEN
U
FOCUS
LENS SHIFT
ZOO
M
Setting Up (continued)
10:0
1:1
STANDBY/ON
VIDEO
LASER INDICATOR
RGB
BLANK ASPECT LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
LENS SHIFT
Setting Up (continued)
Adjusting The Projector's Elevator
WARNING • Do not touch about the lens and ventilation openings during use or
immediately after use to prevent a burn.
CAUTION
hold the projector whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set
the projector is uneven or if you otherwise need to adjust the angle of projection. The
adjustment range of the elevator feet is 0 to 9 degrees.
• To prevent damaging the projector and injuring yourself, always
Press and hold in the elevator buttons.
1
Raise or lower the projector to the desired height and
2
then release the elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
As necessary, you can also finely adjust the height of
3
the projector by twisting the elevator feet by hand.
Using The Lens Shift Buttons
NOTE
to the center.
The lens of this projector can be shifted
vertically. When you want to finely adjust the
picture position, use the LENS SHIFT buttons
of the projector.
• Generally, better quality of a picture is available when the lens shift is set
Elevator buttons
Elevator feet
Projector
LENS SHIFT buttons
Remote control
7
Setting Up (continued)
Setting Up (continued)
Connecting Your Devices
WARNING • Whenever attempting to connect other devices to the projector, read
thoroughly the "User's Manual - Safety Guide", this manual and the manual of each
device to be connected. Incorrect connecting could result in fire or electrical shock.
CAUTION
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to the
device and/or projector.
ATTENTION
connection may result in malfunction and/or damage to the device and/or projector.
Refer to the section “Technical” of this manual for the pin assignment of connectors and
RS-232C communication data.
• Some cables have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one
end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
• Whenever attempting to connect a laptop computer to the projector, be sure to
activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to
the instruction manual of the corresponding laptop computer.
• TURN OFF ALL DEVICES prior to connecting them to the projector.
• Make sure that you connect devices to the correct port. Incorrect
NOTE
these modes may not be compatible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
• When the image resolution is changed on a computer, depending on an input,
NOTE
• Plug-and-Play is a system incorporated in the computer, its operating system and
peripheral equipment (i.e. display devices).
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible.
• Please take advantage of this function by connecting the accessory RGB cable to the
RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other
type of connection is attempted.
• Please use the standard drivers in your computer as this projector is a Plug-and-Play
monitor.
• Some computers may have multiple display screen modes. Use of some of
automatic adjust function may take some time and may not be completed. In this
case, you may not be able to see a check box to select “Yes/No” for the new
resolution on Windows. Then the resolution will go back to the original. It might be
recommended to use other CRT or TFT monitors to change the resolution.
Plug-and-Play Capability
8
Setting Up (continued)
R/CR/PR G/Y B/CB/PB H V
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
REMOTE CONTROL
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
A
E
F G
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
G/Y H V
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
R/CR/PR B/CB/PB
B
D
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
C
D
Setting Up (continued)
Please refer to the following (for example) for connecting your devices. See the rear of the projector.
You can see the ports.
Examples of connection with a computer
KEYSTONE
LENS SHIFT
M1-D
RGB
SEARCH
INPUT
BNG
COMPONENT
RESET
INTER
S-VIDEO
FOCUS
ZOOM
VIDEO
MENU
STANDBY/ON
TEMP
AUDIO I
N1
AUDIO IN2
RGB
RGB OUT
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
BNC
LAMP
REMOTE CONTROL
CONTROL
NETWORK
AUDIO OUT
CR/PR
Ca/Pa
Y
V
R-AUDIO IN-L
VIDEO
S-VIDEO
Computer Projector
A
RGB out RGB cable RGB
Audio out Stereo Mini cable AUDIO IN 2
RS-232C port RS-232C cable CONTROL
Network port CAT-5 cable NETWORK
■ If using a M1-D input (to mouse control)
DVI port M1-D
USB port M1-D cable
Audio out Stereo Mini cable AUDIO IN 1
■ If using a BNC input
R/PR
R/C
G/Y
B/CB/PB
RGB out
BNC cable
H
V
E
F
G
B
D
C
Audio out Stereo Mini cable AUDIO IN 1
D
9
Setting Up (continued)
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
REMOTE CONTROL
H I
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
H J
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
H
K
R-AUDIO IN-L VIDEO
R-AUDIO IN-L VIDEO
COMPONENT
R-AUDIO IN-L VIDEO
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
HI
K
Setting Up (continued)
Examples of connection with a VCR/DVD Player
VCR/DVD Player Projector
Audio out (R)
Audio out (L)
Video out
R-AUDIO IN
AUDIO IN-L
VIDEO IN
■ If using a s-video signal
S-video out S-video cable S -VIDEO
Audio out (R)
Audio out (L)
R-AUDIO IN
AUDIO IN-L
■ If using a component signal
CR/PR out
CB/PB out
Y out
Audio out (R)
Audio out (L)
CR/PR
CB/PB
Y
R-AUDIO IN
AUDIO IN-L
■ If using a SCART RGB input
H
I
J
H
K
H
SCART
RGB out
10
SCART
adapter
COMPONENT
R-AUDIO IN-L VIDEO
R (CR/PR)
B (C
B/PB)
G (Y)
R-AUDIO IN
AUDIO IN-L
VIDEO IN
K
H
I
Setting Up (continued)
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
L
REMOTE CONTROL
VIDEOR-AUDIO IN-L
S-VIDEO
BNC
RGB
AUDIO IN1
AUDIO IN2
RGB OUT
AUDIO OUT
R/C
R/PR G/Y B/CB/PB HV
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
M
Setting Up (continued)
Connecting to a monitor
Monitor Projector
L
RGB in RGB cable RGB OUT
Connecting to a speaker (with amplifier)
Speaker Projector
Audio in Stereo Mini cable AUDIO OUT
Connecting The Power Supply
M
WARNING •
connections may result in fire and/or electrical shock. Please adhere to the “User’s manual –
Safety Guide” and the following.
•
Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
•
Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
•
Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
•
Make sure that you firmly connect the power cord to the projector and wall outlet.
Connect the connector of the power cord to
1
the AC inlet of the projector.
Firmly plug the power cord’s plug into the
2
outlet.
Use extra caution when connecting the power cord as incorrect or faulty
KEYSTONE
LENS SHIFT
M1-D
RGB
SEARCH
INPU
T
BNG
COMPONENT
RESET
IN
S-VIDEO
TER
FOCUS
ZOOM
VIDEO
MENU
STANDBY/ON
TEMP
AUDIO IN1
AUDIO IN2
RGB
RGB OUT
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
BNC
AC Inlet
Connector Plug
LAMP
REMOTE CONTROL
CONTROL
NETWORK
AUDIO OUT
CR/PR
Ca/Pa
Y
R-AUDIO IN-L
VIDEO
S-VIDEO
Outlet
11
Remote Control
STANDBY/ON
VIDEO
LASER INDICATOR
ESC MENU
POSITION
RESET AUTO
KEYSTONE
1 2 3
ID CHANGE
SEARCH
ON
OFF
FREEZE MUTE
MAGNFY
PinP
VOLUME
RGB
BLANK
PREVIOUS
NEXT
ASPECT
ENTER
LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
JQA
MADE IN CHINA
P S
C
レーザー光をのぞき込まないこと。
レーザー光を人に向けないこと。
子供に使わせないこと。
製造者：INTERLINK ELECTRONICS
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
CAUTION
WAVE LENGTH: 640-660nm
MAX OUTPUT: 1mW
CLASS 2 LASER PRODUCT
Comples with 21 CFR, 1040.10 AND 1040.11
IEO60825-1:1993+A1:1997+A2:2001
LASER-STRAHLING
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
WAVE LENGTH:640-660nm MAX OUTPUT:1mW
レーザー光
ビームをのぞきこまないこと
クラス2レーザー製品 JISC6802（1998）
最大出力：1.0mW 波長：640−660nm
MODEL:H-IRC4
LASER RADIATION
DO NOT STARE INTO BEAM
MANUFACTURER: B
MANUFACTURED
JANUARY,2003
INTERLINK K.K.
1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN
101-0031
MADE IN CHINA
Remote Control
About The Laser Pointer
WARNING • The laser pointer of the remote control is used in place of a finger or
rod. Never look directly into the laser beam outlet or point the laser beam at other
people. The laser beam can cause vision problems.
CAUTION
• Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
This remote control has a laser pointer in place of a finger or rod. The laser beam works and the
LASER INDICATOR lights while the LASER button is pressed.
Putting Batteries
CAUTION • About the battery
• Keep a battery away from children and pets.
• Use only the battery specified: two AA batteries.
• Do not mix new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading the
battery (as indicated in the remote control).
• Dispose of batteries in accord with environmental laws.
1
12
Remove the battery
cover.
Slide back and
remove the battery
cover in the direction
of the arrow.
Insert the batteries.
2
Align and insert the
two AA batteries
according to their plus
minus terminals (as
indicated in the remote
control).
Close the battery
3
cover.
Replace the battery
cover in the direction
of the arrow and snap
it back into place.
Remote Control (continued)
IN
T
ER
INPUT
M1-D
R
GB
B
NG
S
-VIDEO
STANDBY/ON
T
EM
P
VIDE
O
C
O
MP
O
NEN
T
L
AM
P
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENS SHIFT
ZOO
M
Remote Control (continued)
Operating The Remote Control
CAUTION • Do not disassemble the remote control.
• Do not place the remote control near the projector’s lens, fan, or vents.
• Do not drop or otherwise expose the remote control to physical impact.
•
Do not get the remote control wet or place it on wet objects on it. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
NOTE
•
When strong light, such as direct sunlight or light from an extremely close range (such as from an
• Replace the batteries whenever the remote control starts to malfunction.
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
•
The remote control works with the
projector’s remote sensor.
•
Front remote sensor is 3 meters with a 60
degree range (30 degrees to the left and
right of a remote sensor).
Rear remote sensor is 3 meters with a 40
degree range (20 degrees to the left and
right of a remote sensor).
•
Also a remote signal reflected in the screen etc.
may be available. If it is difficult to send a remote signal to the sensor directly, please try.
•
Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the
remote control in an area free from obstacles that could block the remote control’s output signal to the projector.
memo
You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL
ports of the main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
Using The Remote ID Feature
This is the function to properly use when you use two or
three same type projectors at the same time. This function
should be used combining a setup of a projector.
Set the ID number to the projector beforehand,
referring to the item “IR REMOTE ID” of the section
“OPTION Menu”.
memo
When the ALL is selected to the item “IR
REMOTE ID” of the OPTION menu, the projector is
controlled by a remote control irrespective of the
position of the ID CHAGE switch.
Slide the knob of the switch into the position of the
ID number of the projector you want to control.
LASER INDICATOR
STANDBY/ON
VIDEO
+
++
LENS SHIFT
FOCUS ZOOM
–––
ASPECT
BLANK
PREVIOUS
ENTER
ESC MENU
POSITION
RESET AUTO
MAGNFY
PinP
ON
FREEZE MUTE
OFF
KEYSTONE
1 2 3
ID CHANGE
RGB
LASER
NEXT
ID CHANGE
switch
VOLUME
SEARCH
13
Remote Control (continued)
Remote Control (continued)
Using The Mouse/Keyboard Control Function
CAUTION • Before connecting, read the manuals of the device you will connect.
Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Do not unplug the connector cables while the computer is operating.
Using the USB control feature, you can use the remote control as a simplified mouse or
keyboard of the computer.
Connect the M1-D port of the projector to the computer via the M1-D cable. Then
functions illustrated below will be enabled.
memo
The USB control can be used with
Windows 95 OSR 2.1 or higher. It may not be
possible to use the remote control, depending
on the computer’s configurations and mouse
drivers.
memo
The function can be used only for the
functions illustrated on the right.
memo
The projector would be enumerated as a
mouse and a keyboard of HID (Human
Interface Device) class devices, after
connecting cable.
LASER INDICATOR
STANDBY/ON
VIDEO
+
++
LENS SHIFT
FOCUS ZOOM
–––
ASPECT
BLANK
PREVIOUS
ENTER
ESC MENU
POSITION
RESET AUTO
MAGNFY
PinP
ON
FREEZE MUTE
OFF
KEYSTONE
1 2 3
ID CHANGE
RGB
LASER
NEXT
Arrow keys / / /
VOLUME
SEARCH
Mouse right button
Keyboard ESC key
Mouse left button
Mouse move pointer
Keyboard
14
(Front)
(Rear)
STANDBY/ON
VIDEO
LASER INDICATOR
RGB
LENS SHIFT
+
–––
++
FOCUS ZOOM
IN
T
E
R
INP
UT
M1-D
RGB
BN
G
S-VIDEO
STA
NDBY/
O
N
T
E
MP
VIDEO
COMPON
E
N
T
LAMP
KEYSTON
E
SEAR
CH
RESET
MENU
FOCUS
LENS SHIFT
ZO
OM
VIDEO
R-AU
DIO I
N-L
S-VIDEO
BNC
RGB
AUDIO I
N1
AUDIO I
N2
RGB OUT
AUDIO O
UT
REMOTE CONTROL
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
IN
T
ER
INP
U
T
M1-D
RGB
BNG
S-VIDEO
STANDBY/
ON
T
E
MP
VIDEO
COMPON
E
N
T
LAMP
KEYSTON
E
SEARCH
RESET
MENU
FOCUS
LENS SHIFT
ZOOM
VIDEO
R-AU
DIO I
N-L
S-VIDEO
BNC
RGB
AU
DIO I
N1
AUDIO I
N2
RGB OUT
AUDIO O
UT
REMOTE CONTROL
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
STANDBY/ON
VIDEO
LASER INDICATOR
RGB
LENS SHIFT
+
–––
++
FOCUS ZOOM
IN
T
ER
INP
U
T
M1-D
R
GB
BNG
S-VIDEO
ST
ANDBY/ON
T
E
M
P
VIDEO
COMPON
E
N
T
LAMP
KEYSTONE
SEAR
CH
RESET
MENU
F
OCUS
LE
N
S SHIFT
ZO
OM
VIDEO
R-AU
DIO I
N-L
S-VIDEO
BNC
RGB
AU
DIO I
N1
AUDIO I
N2
RGB OUT
AUDIO O
UT
REMOTE CONTROL
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
Power ON/OFF
LENS SHIFT
STANDBY/ON
VIDEO
LASER INDICATOR
RGB
BLANK ASPECT LASER
LENS SHIFT
+
–––
++
FOCUS ZOOM
Power ON/OFF
WARNING • When the power is ON, a strong light is emitted. Do not look
into the lens or vents of the projector.
NOTE
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
Tur ning On The Power
STANDBY/ON
Remove the lens cap.
1
Set the power switch to [ | ] (ON).
2
The STANDBY/ON indicator will light to solid orange.
STANDBY/ON button / indicator
STANDBY/ON
Press the STANDBY/ON button.
3
The projector lamp will light up and the
STANDBY/ON indicator will begin blinking green.
Power switch (ON position)
When the power is completely on, the indicator
will stop blinking and light green.
Use the LENS SHIFT buttons to shift the
4
picture upward or downward.
LENS SHIFT
Select an input signal according to the
5
section “Selecting An Input Signal” of the
buttons
following page.
Tur ning Off The Power
STANDBY/ON
button
Press the STANDBY/ON button.
1
The message “Power off?” will appear on
the screen for approximately 5 seconds.
STANDBY/ON
STANDBY/ON button / indicator
Press the STANDBY/ON button again while
2
“Power off?” the message is visible.
The projector lamp will go off, and the
STANDBY/ON indicator will begin blanking orange.
Then the STANDBY/ON indicator will stop blinking
and light to solid orange when the lamp cooling is
complete.
Switch the power switch to [O] (OFF).
3
The STANDBY/ON indicator will go off.
Attached the lens cap.
4
Power switch (OFF position)
STANDBY/ON
STANDBY/ON
button
15
IN
TE
R
INPU
T
M1-D
RGB
BNG
S-VIDEO
STANDBY/
ON
T
E
MP
VIDEO
COMPON
E
N
T
LAMP
KEYSTONE
SEARCH
RESET
MENU
FOCUS
LENS SHIFT
ZOOM
VIDEO
R-AU
DIO I
N-L
S-VIDEO
BNC
RGB
AUDIO I
N1
AUDIO I
N2
RGB OUT
AUDIO O
UT
REMOTE CONTROL
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
Operating
T
T
IN
T
E
R
INP
U
T
M1-D
RGB
B
N
G
S-VIDEO
ST
A
NDBY/
ON
T
E
M
P
VIDEO
CO
MPON
E
N
T
LAMP
KEYST
ONE
SEARCH
RESET
MENU
FOCUS
LENS SHIFT
ZOOM
VIDEO
R-AU
DIO I
N-L
S-VIDEO
BNC
RGB
AU
DIO I
N1
AUDIO I
N2
RGB OUT
AUDIO O
UT
REMOTE CONTROL
R/C
R
/P
R
G/Y
B/C
B
/P
B
H
V
Y
CONTROL
NETWORK
CR/PR
Ca/Pa
C
ZOOM
FOCUS
Operating
Selecting An Input Signal
Select an input signal.
1
■ Using the INPUT dial
Turn the INPUT dial of the projector.
Turning the dial cycles through the input ports as
shown below. Select the signal you wish to project.
M1-D RGB BNC
VIDEO
■ Using SEARCH button
Press the SEARCH button of the projector or the
remote control.
Pressing the button automatically cycles through input
ports and displays the picture of retrieved signal.
memo
If no signal is found or the projector is unstable to
find an input signal at any of its ports, it will turn to the state
it was in prior to the search.
M1-D RGB BNC
VIDEO
■ Using RGB button
Press the RGB button of the remote control.
Pressing the button toggles between the RGB ports
as shown below Select the signal you wish to project.
M1-D RGB BN
S-VIDEO COMPONEN
S-VIDEO COMPONEN
BNC
COMPONENT
S-VIDEO
INPUT dial
LASER INDICATOR
STANDBY/ON
VIDEO
+
++
LENS SHIFT
FOCUS ZOOM
–––
ASPECT
BLANK
PREVIOUS
ENTER
ESC MENU
POSITION
RESET AUTO
MAGNFY
PinP
ON
FREEZE MUTE
OFF
KEYSTONE
1 2 3
ID CHANGE
SEARCH button
M1-D
INPUT
RGB
ENTER
VIDEO
VIDEO button
RGB
LASER
NEXT
SEARCH button
VOLUME
SEARCH
SEARCH
RESET
MENU
RGB button
16
■ Using VIDEO button
Press the VIDEO button of the remote control.
Pressing the button toggles between the VIDEO ports
as shown below Select the signal you wish to project.
S-VIDEO VIDEOCOMPONENT
Use the ZOOM buttons to adjust the screen size.
2
Use the FOCUS buttons to adjust the focus.
3
ZOOM
buttons
FOCUS
buttons
Operating (continued)
9
Operating (continued)
Selecting The Aspect Ratio
Press the Aspect button to toggle between the
1
modes for aspect ratio.
■ At a M1-D signal
NORMAL
memo
NORMAL keeps the original aspect ratio of the
4:3
16:9
input signal.
■ At a RGB signal (not M1-D)
4:3
16:
■ At a video signal
4:3
memo
16:9
SMALL
At a HDTV signal of 1125i or 750p, only 16:9 can
LASER INDICATOR
STANDBY/ON
VIDEO
+
++
LENS SHIFT
FOCUS ZOOM
–––
ASPECT
BLANK
PREVIOUS
ENTER
ESC MENU
POSITION
RESET AUTO
MAGNFY
PinP
ON
FREEZE MUTE
OFF
KEYSTONE
1 2 3
ID CHANGE
be selected.
Using The Automatic Adjustment Feature
RGB
LASER
NEXT
VOLUME
SEARCH
ASPECT button
memo The automatic adjustment operation requires approximately 10 seconds. Also,
please note that it may not function correctly with some input.
Press the AUTO button.
1
■ At a RGB signal
The Vertical position (V POSITION), the horizontal
position (H POSITION), the clock phase (H PHASE)
and horizontal size (H SIZE) will be automatically
adjusted.
memo
Make sure that the application window is set to
its maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
■ At a video signal
The signal type mode best suited for the respective
input signal will be selected automatically.
memo
This function is available only when the AUTO is
selected to the item VIDEO of the INPUT menu. For a
component video signal, the signal type is identified
automatically independently of this function.
LASER INDICATOR
STANDBY/ON
VIDEO
+
++
LENS SHIFT
FOCUS ZOOM
–––
ASPECT
BLANK
PREVIOUS
ENTER
ESC MENU
POSITION
RESET AUTO
MAGNFY
PinP
ON
FREEZE MUTE
OFF
KEYSTONE
1 2 3
ID CHANGE
RGB
LASER
NEXT
AUTO button
VOLUME
SEARCH
17
Loading...