DUAKNE 8753 User Guide

PLEASE READ

We are in no way responsible for the
contents of the manual. We do not guarantee
its accuracy and we do not make any claim
of copyright. The copyright remains the
property of their respective owners.

Visit the site to read the latest projector
news and reviews, read and comment on
projector specifications, download user
manuals and much more.

ImagePro 8043/8753

LCD Projector

USERS GUIDE

MODEL 28A8043
MODEL 28A8753

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communi­cations. Operation of this equipment in a residential area is likely to cause harm­ful interference in which case the user will be required to correct the interference
at his own expense.

Canada

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Can­ada.

Safety Certifications

UL, CUL, TÜV, NOM, IRAM, GOST R

EN 55022 Warning

This is a Class A product. In a domestic environment it may cause radio interfer­ence, in which case the user may be required to take adequate measures.

Trademarks

Apple, Macintosh, and PowerBook are trademarks or registered trademarks of
Apple Computer, Inc. IBM and PS/2 are trademarks or registered trademarks of
International Business Machines, Inc. Microsoft, PowerPoint, and Windows are
trademarks or registered trademarks of Microsoft Corporation. InFocus and LP
are trademarks or registered trademarks of InFocus Corporation.

TABLE OF CONTENTS

Safety Instructions iii

Introduction 1

Image Resolution 1
Compatibility 2
Unpacking the Projector 2
Usage Guidelines 5
If You Need Assistance 5
Warranty 6

Setting up the Projector 7

Connecting a Computer 9
Connecting a Video Player 11
Powering up the Projector and Adjusting the Image 13
Turning Off the Projector 14

Using the Projector 15

Basic Image Adjustment 15
Adjusting the Projector 15
Using the Remote Control 17
Using the Keypad and Remote Buttons 18
Using the On-Screen Menus 21
Basic Menu 22
Setup menu 24

Maintenance & Troubleshooting 29

Cleaning the Lens 29
Cleaning the Dust Filters 29
Replacing the Projection Lamp 31
Replacing the Batteries in the Remote Control 32
Using the Security Lock 33
Troubleshooting 34

i

Ta b l e o f C o n t e n t s

Appendix 39

Specifications 39
Accessories 40
Portable and Laptop Activation Chart 42
Using Video Mirroring with a PowerBook Computer 47
Projected Image Size 48

Index 49

ii

SAFETY INSTRUCTIONS

Please read and follow all safety instructions provided BEFORE
using your new projector. Failure to comply with safety instruc­tions may result in fire, electrical shock, or personal injury and
may damage or impair protection provided by equipment. Please
save all safety instructions.

Safety Definitions:

•

Warn i ng:

Statements identify conditions or practices that

could result in personal injury.

•

Caution:

Statements identify conditions or practices that could

result in damage to your equipment.

Safety Symbols:

Attention:

For information about usage of a feature, please

refer to the User’s Guide.

Hot surface. Do not touch.

Warn ing:

An arrow pointing to the lamp door on the projector.

Safety Terms:

•

Warn i ng:

Don’t look directly into the lens when the projector is

turned on.

•

Warni ng:

To replace the lamp, turn the projector off

and unplug the power cord. To avoid burns, wait 60 min­utes before opening the lamp door. Follow all instructions pro­vided in this User’s Guide.

•

Warni ng:

Please use the power cord provided. Connect

the power cord to a receptacle with a protective safety
(earth) ground terminal.

•

Warn i ng:

Refer all service to qualified service personnel. Ser­vicing your own projector will void the warranty. See the fol­lowing page for the customer service contact information.

•

Caution:

Don’t block ventilation openings.

iii

Safety Instructions

•

Caution:

Don’t set liquids on the projector. Spilled liquids may

damage your projector.

•

Caution:

Don’t place the projector on a hot surface or in direct

sunlight.

•

Caution:

Do not drop the projector. Transport the projector in

an vendor-approved case.

Important Operating Considerations

Do not place the projector on a tablecloth or other soft covering
that may block the vents. In the unlikely event of the bulb ruptur­ing, thoroughly clean the area in back of the projector and discard
any edible items placed in that area.

m)

6

.

(

t

f

2

Do not place objects in
this area in back of the projector

Customer Service

If you need assistance, call Dukane Customer Service at:
630-584-2300 or Toll-Free at: 1-800-676-2487

iv

INTRODUCTION

The Dukane ImagePro 8043 and 8753 multimedia projectors are

specifically designed for multipurpose use. They are easy to con­nect, easy to use, easy to transport, and easy to maintain. The

8043

has native SVGA 800x600 resolution, the has XGA

8753

1024x768 resolution. The user interfaces of the two products are
identical; information in this user’s guide applies to both prod­ucts.

Image Resolution

ImagePro 8043

The SVGA resolution of the ’s projected image is 800x600.
The projector is compatible with screen resolutions up to
1280x1024. If your computer’s screen resolution is higher than
1280x1024, reset it to a lower resolution before you connect the
projector

.

8043

ImagePro 8753

The XGA resolution of the ’s projected image is 1024x768.
The projector is compatible with screen resolutions up to
1280x1024. If your computer’s screen resolution is higher than
1280x1024, reset it to a lower resolution before you connect the
projector

.

8753

NOTE: The ImagePro 8043

automatically expands 640 x480

images to 800x600.

NOTE: The ImagePro 8753

automatically expands 640 x480

and 800x600 images to

1024x768.

1

Introduction

Compatibility

The projector is compatible with a wide variety of computers and
video devices, including:

•

IBM-compatible computers, including laptops, up to 1280x1024
resolution.

•

Apple® Macintosh® and PowerBook® computers up to
1280x1024 resolution.

•

Most standard VCRs, DVD players, camcorders and laser disc
players.

Unpacking the Projector

The projector comes with the items shown in Figure 1. Check to
make sure all are included. Contact your Dukane dealer

immediately if anything is missing.

2

1

5*

2

4

3

6

7

1. Projector + lens cap 6. Computer cable

2. Soft carry case 7. PS/2 mouse cable

3. User’s Guide, Quick Start
card, and CD

4. Remote control 9. S-Video cable

5. Power cord* 10. Audio/Video cable

*additional country-dependant power cords may be included

8

10

8. USB mouse cable

9

Shipping box contents

FIGURE 1

3

Introduction

IR sensor

IGURE 2

F

Front view of projector

focus ring

keypad

zoom ring

foot release

dust filters

foot release

connectors

3

IGURE

F

Rear view of projector

power
cord
connector

adjustable foot

lamp door

IR sensor

security lock

4

Usage Guidelines

•

Do not look directly into the projection lens when the projector
is turned on. The bright light may harm your eyes.

•

Do not block the grills on the projector. Restricting the air flow
can cause it to overheat and turn off. If this happens, you must
wait a minute before attempting to turn it back on.

•

Handle the projector as you would any product with glass
components. Be especially careful not to drop it.

•

Avoid leaving the projector in direct sunlight or extreme cold
for extended periods of time. If this happens, allow it to reach
room temperature before use.

•

Transport the projector in a vendor-approved hard or soft case.

If You Need Assistance

The first place to look for help is in this manual. Be sure to check
the guidelines in “Troubleshooting” on page 34.

If those sources don't answer your question, call your Dukane
dealer. You can also call Dukane Customer Service directly at:
630-584-2300 or Toll-Free at: 1-800-676-2487

5

Introduction

Warranty

This product is backed by a limited Five-year warranty. The
details of the warranty are printed at the back of this manual.

When sending your projector in for repair, Dukane recommends
shipping the unit in its original packing material, or having a pro­fessional packaging company pack the unit for shipping. Do not
ship your projector in the enclosed soft case. Please insure your
shipment for its full value.

6

SETTING UP THE PROJECTOR

Place the projector on a flat surface.

1

•

The projector must be within 6 feet (1.8 m) of your power
source and your computer.

•

If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear” on page 25
to reverse the image.

•

If you are installing the projector on the ceiling, refer to the
installation guide that comes with the Ceiling Mount Kit for
more information. To turn the image upside down, see
“Ceiling” on page 25.

Position the projector the desired distance from the screen.

2

•

If the image is too big or too small, use the zoom ring to
adjust the size or move the projector forward or backward.
Figure 4 shows three projected image sizes. For more infor­mation about image size, see “Projected Image Size” on
page 48.

NOTE: The projector must be at

least 3.6 feet (1 m) from the pro-

jection screen.

1

6

.

7

f

t

.

8

.

3

f

t

.

3

.

3

f

t

.

3.9 ft

9.8 ft.

.

19.7 ft.

Projected image size at minimum zoom

Make sure the projector and the computer are turned off.

3

F

IGURE

4

7

Setting up the Projector

NOTE: Before you continue,

make sure the projector and all

other equipment is turned off. If

you’re connecting a computer,

make sure the distance between it

S-video

video

computer

computer
monitor

and the projector is 6 feet or less.

F

IGURE 5

Connector panel

NOTE: If you are connecting an

older Macintosh computer that

does not have a 15-pin connector,

you must use a Mac adaptor

between the computer and the

projector. See “Optional

Accessories” on page 41.

audio in

USB mouse

PS/2 mouse

8

Connecting a Computer

Plug one end of the computer cable into the blue “Computer

1

VGA”

Plug the other end of the computer cable into the monitor con-

2

connector on the projector.

nector on your computer. If you are using a desktop computer,
you need to disconnect your monitor cable from your com­puter.

S-Video

computer cable

Video

MonitorVGA

ComputerVGA

USB

PS2/RS-232

Audioin

Connecting the projector to a computer

Do you want to play your computer’s audio on the projector?

Plug either end of the audio cable (ordered separately) into

1

the audio connector on your computer.

NOTE: Many laptop computers

do not automatically turn on their

external video port when a sec-

ondary display device such as a

projector is connected. Refer to

your computer manual for the

command that activates the exter-

nal video port. Activation com-

mands for some laptop computers

are listed in the Appendix of this

manual on page 42 and in the

Service section of our website.

FIGURE 6

Plug the other end of the audio cable into the “Audio in” con-

2

nector on the projector.

Do you want to display the image on your desktop computer’s moni­tor as well as on the projection screen?

Plug the monitor’s cable into the “Monitor VGA” connector

1

on the projector.

9

Setting up the Projector

Do you want to control the computer’s mouse from the projector’s
remote?
If your computer has a PS/2 connector, use the PS/2 mouse cable.

Plug the green end of the PS/2 mouse cable into the mouse

1

connector on your computer.

Plug the black end of the PS/2 mouse cable into the

2

“PS2/RS-232” connector on the projector.

If your computer has a USB connector and is running Windows 98,
use the USB mouse cable.

Plug the flat end of the USB mouse cable into the mouse con-

1

NOTE: The USB mouse is

supported for use with

Windows 98 or higher only.

nector on your computer.

Plug the square end of the USB mouse cable into the “USB”

2

connector on the projector.

You must have the appropriate USB drivers installed on your
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.

NOTE: You do not need to restart

your computer after connecting a

USB mouse to use it (it is hot-

pluggable). You must restart your

computer after plugging in a PS-2

mouse.

10

Now you’re ready to power up the projector and your computer.
Skip to “Powering up the Projector” on page 13.

Connecting a Video Player

If your video device (VCR, DVD player, video camera) uses a
round, one-prong composite video connector, use the composite
audio/video (A/V) cable provided. The end with 2 connectors
attaches to the projector, the other end attaches to the video
device.

•

If your video device uses a round, four-prong S-video con­nector, use an S-video cable. S-video generates a higher
quality image.

Plug the A/V cable’s round yellow connector into the “video-

1

out” connector on your video device (Figure 7). This connec­tor may be labeled “To Monitor.”

•

If you’re using an S-video cable, connect the round black
connector to the “S-video out” connector on the video
device.

Plug the other yellow connector into the “Video” connector on

2

the projector.

•

If you’re using S-video, plug the other end of the cable into
the “S-Video” connector on the projector.

S-Video

A/V cable

Video

ComputerVGA

MonitorVGA

Audioin

PS2/RS-232

USB

Connecting the projector to a VCR using the A/V cable

F

IGURE

7

11

Setting up the Projector

Plug the A/V cable’s white connector into the left “audio out”

3

connector on your video device. Plug the cable’s red connec­tor into the right “audio out” connector on the video device.

Plug the blue end of the A/V cable into the “Audio in” con-

4

nector on the projector.

The projector is compatible with these major broadcast video

CAUTION: Your video player

may also have a “Video Out”

connector for a coaxial cable

connection. DO NOT use this to

connect to the projector.

standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and
SECAM. It automatically adjusts to optimize its performance for
the incoming video.

12

Powering up the Projector

Remove the lens cap.

1

Plug the power cord into the back of the projector, then plug it

2

into your electrical outlet. A surge-protected power strip is
recommended.

•

The LED on the top of the projector (Figure 11 on page 18)
lights orange after a few seconds.

After the LED lights orange, press the Power button on the

3

projector’s keypad or remote.

•

The fans start to run, the LED on the top of the projector
lights green, and the InFocus startup screen appears. It
takes about one minute for the image to achieve full bright­ness.

If you connected a video player, turn it on.

4

•

The video image should display on the projection screen. If
it doesn’t, press the
(page 18) or the

Video

Source/Select

button on the remote to display your

button on the keypad

video image.

If you connected a computer, turn it on.

5

•

The computer image should display on the projection
screen. If it doesn’t, press the
keypad or the

Computer

button on the remote to display

Source/Select

button on the

your computer’s image.

NOTE: Always use the power cord

that shipped with the projector.

NOTE: The first time you connect

your computer to the projector, the

computer may display a message

stating that new hardware was

found. The Add New Hardware

Wizard may appear. Use the Wiz-

ard to load the correct driver (the

computer considers the projector a

Plug and Play Monitor).

•

Make sure your laptop’s external video port is activated;
see “Portable and Laptop Activation Chart” on page 42 for
details.

•

If necessary, make adjustments to the image using the pro­jector’s on-screen menus. To open the menus, press the

button on the keypad or remote. For more informa-

Menu

tion about the menus, see page 21.

NOTE: With some computers,

the order in which you power up

the equipment is very important.

Most computers should be turned

on last, after all other peripherals

have been turned on. Refer to your

computer’s documentation to

determine the correct order.

13

Setting up the Projector

Turning Off the Projector

To turn off the projector, press the Power button. A dialog box
appears, asking for confirmation. Press the Power button again to
turn the lamp off. The fans continue to run for a minute, then the
projector shuts off.

If you want to turn the lamp back on, you must allow 90 seconds
for the lamp to cool. The lamp won’t light if it’s too hot.

If you want to turn off the projector for a short period of time,

NOTE: To maximize lamp life,

allow the projector to run for at

least five minutes before turning

it off.

press the
mode. The lamp goes out, and the fans run and the LED blinks
orange for 1 minute. After 1 minute, the fans turn off and the LED
lights solid orange. To exit standby mode and return to normal
operation, press the

button twice. This puts the projector in standby

Pow er

button.

Pow er

14

USING THE PROJECTOR

This section describes how to use and make adjustments to the
projector. It also provides a reference to the keypad and remote
buttons and the options available from the on-screen menus.

Basic Image Adjustment

Make sure you have powered up your equipment in the right

1

order (page 13).

If the image doesn’t display completely, zoom the image

2

(page 15), adjust the height of the projector (page 16) or center
the image by adjusting its horizontal or vertical position
(page 24). Be sure the projector lens is at a 90 degree angle to
the screen.

If the image is out of focus, rotate the focus ring (page 15).

3

If the colors don’t look right, adjust the brightness, contrast,

4

tint, or color (page 22).

Adjusting the Projector

To focus the image, rotate the focus ring (Figure 8) until the image
is clear. To zoom the image, rotate the zoom ring. This adjusts the
image size.

zoom ring

focus ring

F

IGURE

Focus ring and zoom ring

NOTE: To obtain the best overall

focus quality, open the menu and

focus on the text. This will ensure

that the best overall image quality

is achieved.

8

15

Using the Projector

The projector is equipped with a self-locking, quick-release feet
and buttons.

To raise the projector:

Raise the projector to the height you want, then press and

1

hold the foot release buttons. Release the buttons to lock the
feet into position (Figure 9).

If necessary, rotate the feet to adjust the angle of the projected

2

image.

release button

FIGURE 9

Adjusting the height of the projector

16

Using the Remote Control

To control the computer’s mouse from the projector’s remote,
you must connect the USB or PS/2 mouse cables to the computer
and the projector. See page 10 for details.

Point the remote control at the projection screen or at the front or
rear of the projector (not at the computer). The range for opti­mum operation is about 40 feet. If you point the remote at the
projection screen, the distance to the screen and back to the pro­jector must be less than or equal to 40 feet. For best results, point
the remote directly at the projector.

Volume

Effect

Select

Keystone

Black

Computer

Navigate

Contrast

Power

Menu

Video

Brightness

F

10

IGURE

Remote control

17

Using the Projector

Using the Keypad and Remote Buttons

While the menus are displayed, the
on the keypad and the arrow buttons on the remote act as menu
navigation and adjustment buttons and the
on the keypad and the

Select

buttons. See “Using the On-Screen Menus” on page 21 for details.

Keyston e

and

Vo lu me

Source/Select

buttons

button

button on the remote act as selection

18

LEDs

FIGURE 11

Keypad and remote buttons

Menu

Press the

button to open the on-screen menus. Press

Menu

Menu

again to close the menus. When you close the menus, the projec­tor saves any changes you made. The menu automatically closes
after 1 minute if no buttons are pressed. For more information
about the on-screen menus, see page 21.

Source/Select (keypad only) or Computer and Video (remote only)

When you have more than one source (computer and video) con­nected to the projector, select between them by pressing the

Source/Select

button on the keypad or the

Computer

or

Video

but-

ton on the remote.

Pow er

Press this button to turn the projector on and off.

Vo lu me

Press the Volume buttons to adjust the volume.

Arrow buttons

Use these buttons to navigate through and make adjustments to
the on-screen menus. See “Using the On-Screen Menus” on
page 21 for details.

Key stone

Use this feature to adjust the image vertically and make a squarer
image.

Press the

1

Keystone up

image, and press the

arrow to reduce the upper part of the

Keystone down

arrow to reduce the lower
part. You can also adjust keystone from the Basic menu (see
page 23 for details on the menu).

increasing keystone

decreasing keystone

F

Adjusting the keystone

IGURE

12

19

Using the Projector

Black (remote only)

Press this button to display a black screen.

Effect (remote only)

Press this button to invoke the presentation effect. The default
effect is magnify. You can select among freeze, black, mute, and
16:9. See page 26 for details.

To use the magnify effect, press Effect, then press the up or right
arrow to magnify the image, press the down or left arrows to
decrease the magnification. If you press Effect again, you can use
the arrows to pan the image, displaying different parts of it (only
if the image is magnified). To return to magnify mode, press the
Select (or L) button. To return to the original size, press the Effect
button twice.

Contrast (remote only)

Press the Contrast up and down arrows to adjust the contrast
from 0-100.

Brightness (remote only)

Press the Brightness up and down arrows to adjust the Brightness
from 0-100.

20

Using the On-Screen Menus

The projector

has menus that allow you to make image adjust-

ments and change a variety of settings.

To open the on-screen menus, press the
keypad or remote. This displays the

Key stone

and

Vo lu me

buttons on the keypad to menu navigation

Basic

buttons. Press the down arrow button
and press the up arrow

button to move the cursor up. The

to move the cursor down

button on the

Menu

menu and changes the

selected menu is highlighted.

FIGURE 13

On-screen menu

To change a menu setting, use the up and down arrow buttons to
move the cursor up and down to the item you want to change
(the selected item is highlighted), then press the
button on the keypad or the

button on the remote. Use the

Select

Source/Select

left and right arrows to adjust the setting, or use the up and down
arrows and the

Source/Select

when you are done.

button to turn a setting on or off. Press

Select

NOTE: Some menu items may be

grayed out (dimmed) at certain

times. This indicates the item is

not applicable to your setup or the

item is not enabled until another

selection is made.

To access a sub-menu, highlight it and press

Source/Select

. To
navigate back to the previous menu, highlight the arrow at the
top of the menu and press

Source/Select

.

Press the up and down arrows to move to another setting. When
you have completed your adjustments, press

Menu

to close the

menus.

21

Using the Projector

Basic Menu

F

14

IGURE

Basic menu

Contrast

The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.

Use the up and down arrows to highlight Contrast, press

1

Source/Select

, use the left and right arrows to adjust the con­trast from 0 to 100 in the slider bar, then press
accept your changes.

Source/Select

to

NOTE: The color setting applies

to video sources only.

22

Brightness

Adjusting the brightness changes the intensity of the image.

Use the up and down arrows to highlight Brightness, press

1

Source/Select

brightness from 0 to 100 in the slider bar, then press

Select

Color

, use the left and right arrows to adjust the

Source/

to accept your changes.

The color setting adjusts a video image from black and white to
fully saturated color.

Use the up and down arrows to highlight Color, press

1

Source/Select

from 0 to 100 in the slider bar, then press

, use the left and right arrows to adjust the color

Source/Select

to

accept your changes.

Key stone

This option helps to keep the image square as the angle of projec­tion is changed. Use this feature to adjust the image vertically
and make a squarer image. See page 19 for details on keystone
adjustments.

Press the down button to highlight Keystone, then press

1

Source/Select

. Use the left and right arrows to adjust the key-

stone setting from -63 to 63 in the slider bar. Press

Source/Select

Setup

to accept your changes.

See the following pages for details on this menu.

Reset

This resets the picutre settings like brightness and contrast.

About

This read-only menu provides information about the source, such
as resolution and horizontal and vertical frequencies.

23

Using the Projector

Setup menu

F

15

IGURE

Setup and Picture menus

Picture menu

•

Screen Aspect

: The default is 4:3. Click 16:9 if you are watching

videos in widescreen format. Highlight Screen Aspect, press

Source/Select

selection, press

, use the up and down arrows to highlight your

Source/Select

to the Picture menu.

, then press the left arrow to return

•

Color Temp

: The default is 7300. Choose a different value to

adjust the amount of red in the image.

•

Sharpness

•

Tu n e

: Adjusts the sharpness of video images.

: Use the left and right arrows to adjust the horizontal

phase and fine tuning of the image.

•

: Use the left and right arrows to adjust the width of the

Width

image.

•

Pos it io n

: Use the left and right arrows to adjust the horizontal
position of the image and use the up and down arrows to
adjust the vertical position.

•

Use the left and right arrows to adjust the tint of video

Tint:

images.

24

System menu

Turn the features in the System menu on and off by highlighting
them and pressing

Source/Select

. A checkmark in the box indi-

cates the feature is on; an empty box means the feature is off.

FIGURE 16

System menu

•

: This turns the image upside down for ceiling-mounted

Ceiling

projection.

•

: This reverses the image so you can project from behind a

Rear

translucent screen.

•

SourceSearch

: When this feature is on, the projector automati­cally searches for an active source. When it is off, you must
press the
or

Video

•

Hide OSD

•

DPMS enable

Source/Select

button on the remote to switch among sources.

: This hides the on-screen display (OSD).

: This turns the Display Power Management Sys-

button on the keypad or the

Computer

tem (DPMS) on. When it is on, the projector turns the lamp off
after 3 minutes of not detecting an active source. The projector
will return to normal activity immediately if it detects an active
source. After 5 additional minutes, the projector turns com­pletely off. You must press the Power button to turn the projec­tor back on. The LED blinks green when in DPMS mode.

•

PnP enable

: This turns the plug and play feature on and off.
When it is On, most new computers will automatically recog­nize the projector, then set the monitor resolution and refresh
rate accordingly. You need to set the Plug and Play setting to
Off for the projector to display properly on some older comput­ers.

25

Using the Projector

Language menu

You can display the on-screen menus in English, German, Span­ish, French, Italian, Dutch, Norwegian, Portuguese, Japanese,
Chinese, or Simplified Chinese. Highlight the desired language,
then press

Source/Select

. The menus redraw immediately.

FIGURE 17

Language menu

26

Effect menu

This menu allows you to assign a different effect to the Effect but­ton on the remote. The default effect is magnify. Highlight an
effect and press

Source/Select

to choose a different one.

F

18

IGURE

Effect menu

•

Magnify

: This allows you to enlarge and display different parts

of the image. See page 20 for detail on magnify.

•

•

•

•

: This freezes the projected image.

Freeze

: This masks the projected image with a black screen.

Black

: This mutes the sound.

Mute

: This allows you to switch between 4:3 and 16:9 wide-

16:9

screen formats.

Service menu

FIGURE 19

Service menu

•

Factory reset

tings. Highlight it, then press
dialog box appears. Press
arrow button to highlight No, then press

: This resets all options to the original factory set-

Source/Select

Source/Select

. A confirmation

to reset, press the right

Source/Select

if you

don’t want a reset.

•

: This read-only window provides information on the pro-

Info

jector’s software, the number of hours the current lamp has
been in use, and selected image settings. Press

Source/Select

close this window.

•

Reset lamptimer

: This resets the lamp hour timer to zero. After

replacing the lamp (page 31), highlight Reset lamptimer, press

Source/Select

, then press it again to confirm your selection. The

timer in the Info window resets to zero.

•

Service Code

: This window can only be accessed by service per-

sonnel by entering a code.

to

27

Using the Projector

Userlogo menu

This menu allows you to display a blank blue or black screen
instead of the default InFocus screen when no source is detected.
Highlight the desired color, press
arrow to return to the previous menu.

FIGURE 20

Userlogo menu

Source/Select

, then press the left

28

MAINTENANCE & TROUBLESHOOTING

This section describes how to:

•

clean the lens

•

clean the air intake dust filters

•

replace the projection lamp

•

replace the batteries in the remote

•

use the security lock feature

•

troubleshoot the projector

Cleaning the Lens

Follow these steps to clean the projection lens:

Apply a non-abrasive camera lens cleaner to a soft, dry cloth.

1

•

Avoid using an excessive amount of cleaner, and don’t
apply the cleaner directly to the lens.

•

Abrasive cleaners, solvents or other harsh chemicals might
scratch the lens.

Lightly wipe the cleaning cloth over the lens in a circular

2

motion.

If you don’t intend to use the projector immediately, replace

3

the lens cap.

Cleaning the Dust Filters

The dust filters catch dust and other particles in the air. If the fil­ters become clogged, the projector does not cool properly and
may malfunction.

Turn off the projector and unplug the power cord.

1

Turn the projector upside down and remove the screws on the

2

filter doors.

29

Maintenance & Troubleshooting

F

IGURE 21

Removing the filter doors

Remove the filter doors and clean them using a vacuum

3

cleaner on low power.

Replace the filter doors and tighten the screws.

4

30

F

22

IGURE

Replacing the filter doors

Replacing the Projection Lamp

The lamp hour timer in the Service Info menu counts the number
of hours the lamp has been in use. When the timer reaches 2000
hours, the Alarm LED lights red, indicating that it is time to
change the lamp. You can order new lamp housings from your
Dukane dealer. See “Accessories” on page 40 for information.

Follow these steps to replace the projection lamp:

Turn off the projector and unplug the power cord.

1

Wait 60 minutes to allow the projector to cool thoroughly.

2

Loosen the three captive screws on the lamp housing.

3

WARNING: To avoid burns,

allow the projector to cool for at

least 60 minutes before you

replace the lamp. Never extract

the lamp housing while the projec-

tor is operating.

WARNING: Be extremely careful

when removing the lamp housing.

In the unlikely event that the bulb

ruptures, small glass fragments

may be generated. The lamp mod-

ule is designed to contain these

fragments, but use caution when

removing the lamp module.

IGURE

F

Loosening the screws on the lamp housing

Carefully remove the lamp housing. Dispose of the lamp in an

4

environmentally proper manner.

23

31

Maintenance & Troubleshooting

IGURE 24

F

Removing the lamp housing

Install the new lamp housing and tighten the screws.

5

Plug in the power cord and press the Power button to turn the

6

WARNING: Do not drop the

lamp module or touch the glass

bulb! The glass may shatter and

cause injury.

projector back on.

To reset the lamp hour timer, navigate to the Setup/Service

7

menu and choose Reset lamptimer. See page 27 for details on
the Service menu.

Replacing the Batteries in the Remote Control

The life of the batteries depends on how often and how long you
use the remote. Symptoms of low battery charge include erratic
responses when using the remote and a reduced range of opera­tion.

32

Follow these steps to replace the batteries:

Turn the remote face down in your hand.

1

Push the release tab on the battery door toward the top of the

2

remote and lift the door off.

Remove the old batteries and dispose of them in an environ-

3

mentally proper manner.

Install two new AAA alkaline batteries. Make sure you install

4

each in the correct direction.

FIGURE 25

Replacing the batteries in the remote

Slide the two tabs on the battery door into position, press the

5

release tab and push the door into the remote to re-install the
door.

Using the Security Lock

The projector has a security connector for use with a PC Guardian
Cable Lock System (Figure 26). See “Optional Accessories” on
page 41 for ordering information. Refer to the information that
came with the lock for instructions on how to use it to secure the
projector.

F

26

IGURE

Installing the security lock

33

Maintenance & Troubleshooting

Troubleshooting

LEDs

The Alarm LED on top of the projector (Figure 11 on page 18) will
alert you to certain problems.

•

A solid red Alarm LED means it is time to change the lamp.
See page 31.

•

A blinking red Alarm LED means the projector is overheat­ing. Turn off the projector and allow it to cool.

The other LED on top of the projector indicates the normal oper­ating state of the projector.

•

A solid green LED means the projector is on.

•

A blinking green LED means the projector is in DPMS
mode. See page 25.

•

An blinking orange LED means the projector is going into
standby mode; a solid orange LED means the projector is in
standby mode. See page 14 for detail on standby mode.

34

Problem: The projector is not running

•

Make sure that the power cord is properly connected to a func-

tional AC electrical outlet. Make sure that the power cord is
also properly connected to the projector.

•

If the projector is plugged into a power strip, make sure the

power strip is turned on.

•

Make sure the projector is turned on. Verify that the LED is

solid green.

Problem: Projector is running, but nothing appears on projec­tion screen

•

Make sure you have removed the lens cap on the projection

lens at the front of the projector.

•

Verify that the Black button on the remote is not activated.

•

Check the projector’s lamp housing to ensure that it is securely

connected to the bottom case. See “Replacing the Projection
Lamp” on page 31.

Problem: Only the start-up screen displays

•

Verify that the cables are connected correctly. See page 9 for

connection procedures.

•

Make sure that the cables do not have any bent pins.

•

Verify that the proper input source is connected. See “Source/

Select (keypad only) or Computer and Video (remote only)”
on page 18.

•

Try resetting the projector. See page 23.

•

You might need to turn everything off and power up the

equipment again in the proper order. Refer to your com­puter’s documentation to determine the correct order.

•

Make sure your laptop’s external video port is turned on. See

the “Portable and Laptop Activation Chart” on page 42 or
your computer’s manual for details.

•

Make sure your computer’s video board is installed and con-

figured correctly.

•

Make sure your computer has a compatible video board. The

projector isn’t CGA or EGA compatible.

If you’re using Windows 98:

Open “My Computer” icon, the Control Panel folder and

1

then the Display icon.

Click the Settings tab.

2

Verify that the Desktop area is set to 1280x1024 or less.

3

Problem: Color or text not being projected

•

You might need to adjust the brightness up or down until the

text is visible. Refer to “Brightness” on page 22 for more infor­mation.

Problem: The screen resolution is not right

•

Make sure the computer’s video card is set for a resolution of

no greater than 1280x1024.

Problem: Image isn’t centered on the screen

•

Move the projector to reposition the image.

•

Reposition the image using the menu. Refer to page 24.

•

Be sure the projector lens is at a 90 degree angle to the screen.

35

Maintenance & Troubleshooting

Problem: Image is too wide or narrow for screen

•

Adjust the zoom or projector placement.

•

Adjust the width of the image. See page 24.

Problem: Image is out of focus

•

Turn the projection lens to focus the image.

•

Make sure the projection screen is at least 3.6 feet (1 m) from

the projector, and that the projector is at a 90 degree angle to
the screen.

•

Check the projection lens to see if it needs cleaning.

Problem: Image and menus are reversed left to right

•

Rear projection mode is probably turned on. Turn Rear off in

the System menu. The image should immediately return to
forward projection. See page 25.

Problem: Projected image is distorted

•

Try resetting the projector. See page 23.

•

Adjust the tuning of the image. See page 24.

Problem: Projected colors don’t match the computer or video
player’s colors

•

Just as there are differences in the displays of different moni-

tors, there are often differences between the computer image
and the projected image. Adjust the brightness, color and/or
contrast in the Main menu. See page 22.

Problem: Lamp seems to be getting dimmer

•

The lamp begins to lose brightness when it has been in use for

a long time. Replace the lamp as described in “Replacing the
Projection Lamp” on page 31.

Problem: Lamp shuts off

•

A minor power surge may cause the lamp to shut off. Turn off

the projector, wait at least a minute, then turn it back in.

•

Make sure the vents on the bottom and back of the projector

are not blocked.

36

Before calling your dealer or Dukane Technical Support for assis­tance, please have the following information available:

•

the projector’s serial number (located on the bottom label)

•

the resolution of your computer.

Call Dukane Technical Support at:

630-584-2300 or Toll-Free at: 1-800-676-2487

37

Maintenance & Troubleshooting

38

APPENDIX

Specifications

The projector must be operated and stored within the tempera­ture and humidity ranges specified.

Te m p e r a t u r e

Operating

Non-operating

Altitude

Operating 0 to 10,000 feet (3,048 meters)

Non-operating 0 to 20,000 feet (6,096 meters)??

Humidity

Operating 20% to 80% relative humidity, non-condensing

Non-operating 10% to 90% relative humidity, non-condensing

Dimensions

3.3 x 8.5 x 11.2 inches (8.4 x 21.5 28.5 cm)

41 to 95
41 to 86

-4 to 140

°

F (5 to 35° C) at sea level

°

F (5 to 30° C) at 10,000 feet

°

F (-20 to 60° C)

We ig h t

5.7 lbs. (2.6 kg) unpacked

Optics

Focus Range 3.6 - 26.2 feet (1 - 7.8 m)

Lamp

Type 132-watt UHP lamp

Input Power Requirements

100-240V~ 2-1A 50-60 Hz

Ceiling Mount

UL tested/listed ceiling mount with minimum capacity of 22 lbs (10kg)

39

Appendix

Accessories

Standard Accessories
(ship with the projector)

User’s Guide

Soft Case

Shipping Box (with packaging)

Computer Cable 6 ft (1.8 m)

Audio/Video Cable 6 ft (1.8 m)

S-Video Cable 6 ft (1.8 m)

PS/2 Mouse Cable

USB Mouse Cable

North American Power Cord (additional coun­try-dependant power cords may be included)

Remote

Projection Lamp Module (included in projector)

Lens Cap

NOTE: Use only Dukane-

approved accessories. Other

products have not been tested with

the projector.

40

Optional Accessories

For a complete listing of Optional Accessories:

 • Contact your local Dukane Dealer
 • Contact Dukane Audio Visual Products Division at:
 1-800-676-2485/2486

 • Check out our web-site at: www.dukane.com/av

41

Appendix

Portable and Laptop Activation Chart

Many laptop computers do not automatically turn on their exter­nal video port when a projector is connected. Activation com­mands for some laptop computers are listed in the following
table. (If your computer is not listed or the given command does
not work, refer to the computer’s documentation for the appro­priate command.) On many laptops, the activation function key

is labeled with an icon, for example or the text CRT/LCD.

NOTE: Usually, pressing the key

commands once activates the

external video port, pressing it

again activates both the external

and internal ports, and pressing it

a third time activates the internal

port. Refer to your computer’s

documentation for details on your

specific model.

Key command to

Computer

Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup)

AST* ** FN-D or Ctrl-D FN-D or Ctrl-D

AMS FN-F2 FN-F2

AMT setup screen setup screen

AT &T F N- F 3

Advanced Logic
Research

Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L

Ambra** FN-F12 FN-F12

Amrel* ** setup menu setup menu

Apple see Mac Portable and Mac PowerBook

Aspen automatic automatic

Award FN-F6 FN-F6

BCC* automatic reboot computer

activate port

Ctrl-FN-D Ctrl-FN-D

FN-F5 FN-F5

type from A:/IVGA/CRT type from A:/IVGA/CRT

FN-F12 FN-F12

FN-F6

Ctrl-Alt-V Ctrl-Alt-V

setup VGA/
Conf.Simulscan

FN-F5 FN-F5

F2/Choose Option/F5 F2/Choose Option/F5

Shift-Ctrl-D Shift-Ctrl-D

Key command to
de-activate port

FN-F3
FN-F6

setup VGA/
Conf.Simulscan

42

Key command to

Computer

Bondwell LCD or CRT options after

Chaplet** setup screen setup screen

Chembook FN-F6 FN-F6

Commax Ctrl-Alt-#6 Ctrl-Alt-#5

Compaq* ** Ctrl-Alt-< Ctrl-Alt->

Compuadd* ** automatic automatic

Data General Ctrl-Alt-Command Ctrl-Alt-Command

Data General
Wal kabou t

Datavue Ctrl-Shift-M Ctrl-Shift-M

DEC** FN-F5 FN-F5

Dell** Ctrl-Alt-< Ctrl-Alt->

Digital* automatic reboot

Dolch dip switch to CRT dip switch to LCD

Epson dip switch to CRT dip switch to LCD

Everex* setup screen option setup screen option

For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L

Fujitsu FN-F10

activate port

bootup

FN-F6 FN-F6

FN-F4 FN-F4

FN-F4 FN-F4

automatic automatic

mode/? (for setup option) mode/? (for setup option)

Alt-F for screen setup
option

2 CRT/X at DOS prompt reboot

FN-F4 FN-F4

Ctrl-Alt-F10 Ctrl-Alt-F10

FN-F8 (CRT/LCD) FN-F8

FN-D FN-D

FN-F12 FN-F12

FN-F2 FN-F2

Key command to
de-activate port

reboot for LCD or CRT
options to appear

Alt-F for screen setup
option

43

Appendix

Key command to

Computer

Gateway FN-F3

Grid* ** FN-F2, choose auto or

Hitachi FN-F7 FN-F7

Honeywell FN-F10 FN-F10

Hyundai setup screen option setup screen option

IBM 970* automatic warm reboot

IBM ThinkPad** reboot, enter setup menu FN-F2

Infotel FN-F12 FN-F12

Kaypro boot up, monitor plugged inunplug monitor

activate port

FN-F1/FN-F1 again simul­taneous

simultaneous

Ctrl-Alt-Tab Ctrl-Alt-Tab

FN-F7, select choice from
setup menu

FN-F1, select choice

FN-F5, select choice

PS/2 SC select choice
(CRT, LCD, etc.)

Key command to
de-activate port

FN-F3
FN-F1

FN-F2

44

Kris Tech FN-F8 FN-F8

Leading Edge FN-T FN-T

Mac Portable
100

Mac PowerBook

140, 145, 150,
170

160, 165, 180,
520, 540, 5300

210, 230, 250,
270, 280, 2300

Magitronic FN-F4 FN-F4

Mastersport FN-F2 FN-F1

no video port: not compatible

no video port: requires a 3rd-party interface

Control Panel folder, Pow­erBook Display folder;
Activate Video Mirroring

requires Apple Docking Station or Mini Dock

warm reboot

Key command to

Computer

Micro Express* automatic warm reboot

Micron FN-F2 FN-F2

Microslate* automatic warm reboot

Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On

NCR setup screen option setup screen option

NEC* ** setup screen option setup screen option

Olivetti* automatic automatic

Packard Bell* ** FN-F0 FN-F0

Panasonic FN-F2 FN-F2

Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup

Samsung* setup screen option setup screen option

Sanyo setup screen option setup screen option

Sharp dip switch to CRT dip switch to LCD

Sun SPARC­Dataview

Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert

Tangent FN-F5 FN-F5

Texas Instru­ments*

Top-Link* ** setup screen option setup screen option

Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home

Twinhead* FN-F7 FN-F7

WinBook Ctrl-Alt-F10 Ctrl-Alt-F10

activate port

CRT at the DOS prompt LCD at the DOS prompt

FN-F3 FN-F3

FN-O/* FN-O/*

Ctrl-Alt-< Ctrl-Alt->

Ctrl-Shift-M Ctrl-Shift-M

setup screen option setup screen option

setup screen option setup screen option

FN-F6 FN-F6

FN-End FN-Home

FN-F5 FN-F5

setup screen option setup screen option

FN-F5 FN-F5

Automatic Automatic

Key command to
de-activate port

45

Appendix

Key command to

Computer

Wyse software driven software driven

Zenith** FN-F10 FN-F10

Zeos** Ctrl-Shift-D

* These manufacturers have models that automatically send video

to the external CRT port when some type of display device is
attached.

** These manufacturers offer more than one key command depend-

ing on the computer model.

activate port

FN-F2 FN-F2

FN-F1 FN-F1

FN-F1

Key command to
de-activate port

Ctrl-Shift-D
FN-F1

46

Using Video Mirroring with a PowerBook Computer

When you turn video mirroring (called SimulScan in newer Pow­erBooks—see below) on, the projector displays the same informa­tion that appears on your PowerBook’s built-in screen. When
video mirroring is off, the projector acts like a separate display.

To turn on video mirroring for the first time:

Open the Monitors control panel; click on Monitor 2.

1

Set the number of colors you want.

2

Open the Control Strip, then click on the monitor icon.

3

Select “Turn Video Mirroring On.”

4

Now you can turn video mirroring on and off from the Control
Strip without having to open the Monitors control panel again.

When using video mirroring and high color graphics such as
slide shows, the projected image occasionally might turn black
and white. If this happens, perform the following steps:

Turn off video mirroring.

1

Open the Monitors control panel.

2

Move the white menu bar to Monitor 2 to set the projector as

3

the primary monitor.

Restart the PowerBook.

4

Using SimulScan

Some newer PowerBooks display images on an external monitor
or projector differently than previous ones. When using
SimulScan, the projector displays the same information that
appears on your PowerBook

To select SimulScan:

Open the Control Panel, then double-click Monitors and

1

Sound.

In the Resolution list, choose the SimulScan mode, then click

2

OK.

If this changes your display settings, a dialog box appears.

3

Click OK to confirm the change.

47

Appendix

Projected Image Size

NOTE: Use the graph and table

to help you determine projected

image sizes.

250

200

150

Diagonal Image Size (inches)

100

50

IGURE 27

F

Projected image size

Range of distance to the screen for a given screen size

Diagonal

Screen Size

(inches)

40 32 5.1 3.9
50 40 6.4 4.9
60 48 7.7 5.9

100 80 12.8 9.8
150 120 19.2 14.8
200 160 25.6 19.7

maximum image size

5

100

Distance to Screen (feet)

Ta b l e 1:

Image Width

(inches)

minimum image size

15

20 25 30

Distance to screen

Maximum

distance

(feet)

Minimum

Distance

(feet)

48

INDEX

Numerics

16 by 9 format 26

A

accessories, ordering 40, 41
activation commands for laptop com-

puters 42

adjusting

brightness 22
color 22
contrast 22
height of projector 15
image position 24
image width 24

keystone 23
adjusting the image 24
altitude limits 39
assistance. See Technical Support

B

Basic menu 22
brightness, adjusting 22

C

cables

audio 9
computer cable 3
mouse 10
ordering 40
power 40

video 11
cases, ordering 40
Ceiling mounted projection 25
cleaning the projection lens 29
Color temperature 24
color, adjusting 22
colors

don’t match monitor colors 36

not displayed 35
compatibility

IBM-compatible 2

Macintosh 2
computer cable 3, 9
computers

compatible 2

connecting 9
connecting

computer 9

mouse 10

power cord 13

video player 11–12
contrast, adjusting 22

D

displaying on-screen menus 18
DPMS mode 25

E

Effect button 20
Effect menu 26

49

Index

F

Factory reset 27
focusing the image 15
Freeze 26

H

Hide OSD 25

I

IBM-compatible computers

compatibility 2
connecting 9

image

adjusting 13, 15
colors don’t match computer’s 36
focusing 15
freezing 26
has lines or spots 36
not centered 35
not displayed 34
out of focus 36
quality 35–36
resolution 1
reversed 36
size 7, 48
too wide or too narrow 36
zooming 15

K

keypad 18
keystone adjustment 19, 23

L

lamp

ordering 40, 41
replacing 31

turns off unexpectedly 36
lamp hour timer 27
Language menu 26
laptop computers

activation sequence to allow

secondary display 42
compatibility 9
connecting 9

LED 13, 18, 34
lens

cap 40
cleaning 29

8043/8753

cases 40
setting up 7
specifications 39
turning off 14
turning on 13

M

Macintosh computers

compatibility 2
connecting 8

magnifying the image 20
maintenance 29
menus. See on-screen menus
monitor, projected colors don’t match

36
mouse, connecting 10
Mute 26

50

O

on-screen menus

displaying 21

P

Picture menu 24
Plug and Play 25
PNP Enable 25
position, adjusting 24
power cord

connecting 13

ordering 40
power saving mode 25
power up sequence 13, 35
PS/2 mouse 10

R

Rear projection 25
remote control

replacing the batteries 32

using 17, 18
replacing projection lamp module 31
Reset 23
resetting the lamp timer 27
resetting the projector 23, 27
resolution 1

S

safety guidelines iii
Screen aspect 24
security lock 33, 41
Service menu 27
Setup menu 23
Sharpness 24
shutting off the projector 14
SimulScan, using with PowerBooks 47
Source/Select button 18
SourceSearch 25
specifications 39
starting up the projector 13
S-video, connecting 11
System menu 25

T

Technical Support

in USA 5
information to have on hand

before you call 37
temperature limits 39
text not visible 35
troubleshooting 34
Tune 24
turning off the projector 14
turning on the projector 13

U

USB mouse 10
Userlogo menu 28

V

vertical lines displayed 36
video cable, connecting 11
video mirroring on a PowerBook 47

W

warranty 41
widescreen format 24, 26

Z

zooming the image 15

51

Index

52

LEGAL INFORMATION

FIVE-YEAR LIMITED WARRANTY

This Dukane LCD projector is warranted to the original purchaser for a period of
five (5) years from the original purchase date - in normal use and service ­against defects in material and workmanship. DUKANE CORPORATION
EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.

During the warranty period, Dukane Corporation will repair or replace (at the
manufacturer's option) any such defective parts (except for the lamp, which is
subject to whatever warranties the manufacturer may provide) without charge to
the purchaser for parts or labor when the product is returned, prepaid and insured,
with proof-of-purchase date. This remedy is void if the product has been
damaged by accident, unreasonable use, neglect, improper service or other
causes not arising out of defects in material or workmanship.

Dukane Corporation disclaims all liability for incidental or consequential damage
of any kind, including all damages arising out of any interruptions in operation of
the product and all damages to software.

No person, firm, or representative is authorized to assume any obligation or to
make any warranty on behalf of the Dukane Corporation other than as stated
above.

THIS LIMITED WARRANTY IS VALID FOR U.S.A AND CANADA.
FOR OTHER LOCATIONS, LOCAL WARRANTIES APPLY.

    SERVICE & REPAIR

For service and parts, contact the Dukane AV Service Department
at 1 [phone] within the USA or 1 [phone] worldwide.
If you would like to send a facsimile (FAX), dial 1 [phone] worldwide.

When requesting warranty service, please have the sales receipt available along
with the model name and serial number.

If it becomes necessary to return the projector, use the original packing material
and box (if retained) or pack securely. Dukane Corporation will not be liable for
any pick-up or delivery charges or any expenses incurred for service calls or
service supplied by anyone other than the Dukane AV Service Department.

Form # 11518-G-01

Dukane Corporation
Audio Visual Products Division
2900 Dukane Drive
St. Charles, IL 60174-3395
E-mail: [e-mail]

Audio Visual Products

Phone: [phone]

Orders: [phone]

Information: [phone]

Fax: [phone]

Parts & Service: [phone]

Fax: [phone]

Part # 401-577-00

PLEASE READ

We are in no way responsible for the
contents of the manual. We do not guarantee
its accuracy and we do not make any claim
of copyright. The copyright remains the
property of their respective owners.

Visit the site to read the latest projector
news and reviews, read and comment on
projector specifications, download user
manuals and much more.