IMPORTANT - All persons that will operate this equipment must read and
become thoroughly competent with all operating procedures and safety
precautions. Misuse of this equipment may result in death, personal injury,
property damage, fire or electric shock.
GENERAL SAFETY PRECAUTIONS
1. You will need this manual for the safety warnings and
precautions, operating, inspection, maintenance and
cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry
place for future reference.
2. The warnings, cautions and instructions discussed in
this instruction manual cannot cover all possible
conditions and situations that may occur. It must be
understood by the operator that common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
3. NEVER use this product for anything other than its
intended use. NEVER modify this product. Failure to
comply with the precautions, warnings and recommendations in this manual will nullify your warranty
and may result in injury or even death.
BE SURE MACHINE IS PLUGGED INTO A
4.
PROPERLY GROUNDED DEDICATED OUTLET
WHOSE ELECTRICAL OUTPUT MATCHES THE
REQUIREMENTS OF THIS MACHINE.
NEVER remove or modify grounding pin; do not use
3-prong adapters.
3-prong adaptors.
cord, use the shortest cord possible and use a cord
that is rated for at least as high a rating as your
appliance. Do not drape extension cords over
counters or place in high traffic areas where
accidental tripping or catching cold occur.Great
Northern Popcorn Company is not liable for damages
or injuries resulting from the use of extension cords
or power strips.
5. DO NOT unplug the machine by pulling or tugging
on the power cord. Firmly grasp the plug and remove
from outlet.
6. MAKE SURE that the power outlet, plug and power
cords used are in good condition. Worn, frayed or
damaged plugs, cords and outlets should be
replaced or repaired by a certified electrician who is
properly qualified to meet local safety and electrical
codes. Power supply cords should be replaced by
the manufacturer. Route cord away from hot popper
surfaces.
7. To reduce the risk of electrical shock or fire, MAKE
SURE that your unit is properly grounded. NEVER
TAMPER WITH, REMOVE OR CUT THE
GROUNDING PIN!!
AVOID using extension cords or
If you must use an extension
ALWAYS unplug the unit before cleaning or
8.
repairs.
always perform service or repair.
9. This product is not intended for commercial use;
INTENDED FOR HOUSEHOLD USE ONLY.
10. Do not cover the power cord.DO NOT immerse
cord in water or use in high traffic areas. DO NOT
run cord over carpets or heating sources or
elements. NEVER use with damaged cords or
plugs.
11. CAUTION! Appliance is HOT! ALWAYS use hot
pads or handles when touching after use. DO
NOT ATTEMPT TO MOVE OR TRANSPORT WITH
HOT OIL.
USE CAUTION WHEN UNLOADING! TO AVOID
BURNS, TURN POPPER AWAY FROM YOU
BEFORE TURNING OVER SO THAT STEAM, OIL
AND HOT LIQUIDS WILL NOT COME INTO
CONTACT WITH YOUR SKIN OR CLOTHES.
12. DO NOT operate with missing or broken parts.
13. This product is intended for INDOOR USE ONLY.
DO NOT USE OUTDOORS.
14. Only qualified repair personnel should perform
maintenance or service. Service or maintenance
performed by unqualified personnel could result in
injury.
15. Do not clean with flammable liquids or cleaners
as this may cause an explosion or fire hazard.
16. DO NOT USE ON STOVETOP, OVEN, PLACE IN
FREEZER OR REFRIGERATOR, ETC.
17. Use caution when operating around children. Do not
allow children to operate or touch the machine
when it is plugged in.
18. Do not use with 3rd party attachments.
19. Make sure the plug is fully inserted into the
receptacle. USE ONLY IN A DEDICATED OUTLET:
do not plug any other appliance into the same
outlet.
20. AVOID OVERHEATING. Your popper is not supplied with an automatic shutoff. ALWAYS add
oil and corn before plugging popper into outlet.
21.ALWAYS ATTACH POWER CORD TO POPPER,
THEN PLUG INTO OUTLET.
22. USE ONLY ON A FLAT, LEVEL SURFACE.
ALWAYS UNPLUG WHEN NOT IN USE!
A qualified service technician should
Copyright 2011 DTX International
Page 3
P O P F R E N Z Y S T I R P O P P E RP O P F R E N Z Y S T I R P O P P E R
Makes up to 6 Quarts of Popcorn
Built-in Butter Bin to Melt Evenly
as Popcorn Pops
Non-Stick Surface Helps to Prevent
120V AC Power
Burnt Popcorn
Heat Resistant Popper Bottom-Safe
Heavy Duty Stir Rod Keeps Kernels
to Use on Table/Countertop
Moving for Less Old Maids
Popper Dome Converts to Serving
Bowl
CUSTOMER SERVICE
CUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICE
Customer service and product support are available online at www.greatnorthernpopcorn.com.
WARRANTY AND RETURN POLICY
The Great Northern Popcorn Company hot air poppers are warrantied against defects in material and
workmanship for a period of one year for residential and personal use under normal conditions.
Warranty is limited to replacement parts.
Our return policy allows 30 days from the date of delivery to return products, provided it is new,
unused and in the original packaging as received. We highly recommend that the buyer thoroughly
inspect the purchased product before using it. We charge a 20% restocking charge on all returned
items. Return shipping is the responsibility of the buyer. We cannot accept returns for any reason
after 30 days from the date of delivery. A credit will be issued after the item is inspected and
accepted.
All shipping damages must be claimed with the designated shipper. Check the shipping carton for
damage before signing the bill of lading.
If an item is opened and deemed to be defective within 30 days from the date of delivery, please
contact us at www.greatnorthernpopcorn.com for return instructions. A Great Northern Popcorn
Company RMA is required when returning defective merchandise. When returning your order please
include a copy of your order number with date purchased, your Great Northern Popcorn Company
RMA and the reason for the return.
Warranty shall not apply to: products which are used for a purpose other than which they were
designed for or which have been altered in any way that would be detrimental to the performance or
life of the product. Misapplication, misuse or negligence will revoke the warranty.
Copyright 2011 DTX International
Page 4
P O P F R E N Z Y S T I R P O P P E RP O P F R E N Z Y S T I R P O P P E R
CUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICECUSTOMER SERVICEBEFORE FIRST USE:
1. Unpack your popper and make sure all parts are in good condition and ready to use. Next,
wash the popper dome and butter bin cover in mild, warm soapy water and dry thoroughly.
2. Unscrew the stir rod cap and remove the stir rod. Wipe the stir rod and non-stick popping
surface with mild, warm soapy water and dry thoroughly. Reassemble the stir rod and secure
with stir rod cap.
3. Be sure to select a flat level surface to place your popper and make sure the cord is routed
away from the popper’s heating surfaces. Your popper is ready to go.
Copyright 2011 DTX InternationalCopyright 2011 DTX International
Page 5
OPERATING INSTRUCTIONS
REMEMBER:
ALWAYS load your popper with oil and corn BEFORE plugging into outlet. Your machine will begin stirring as soon as it
is plugged in.
BE SURE that the butter bin cap is REMOVED when popping begins. This allows steam to escape and ensures light
and fluffy popcorn. REPLACE CAP BEFORE UPENDING.
To use your popper:
1. Remove butter bin cap if it is on. Place the recommended amounts of oil and kernels into your
popper, distributing evenly over the non-stick surface.
2. Next, attach the power cord into the receptacle on the base of your popper, then plug the popper
into a properly grounded outlet.
3. Attach the dome to the popper base by fitting the dome handles into the handles of the base.
4. To melt butter onto your popcorn, distribute evenly sliced cold butter pats over the butter bin so that
it will drip through the holes as your popper pops. Warmer, or room temperature butter can be
added after the popping begins. This will keep butter from burning on hot popper surface.
Note: If you are not using butter on your popcorn you must still remove the butter bin cap
before popping!
5. Attach the power cord into the receptacle on the base of your popper, then plug the popper into a
properly grounded 120V outlet on a level surface. Your popper will begin stirring as soon as you plug
it in. NOTE: DO NOT SHAKE OR MOVE POPPER WHILE IN USE!
6. Once popping is done, unplug from outlet and remove cord from base (See #1 in illustration below).
CAUTION! POPPER WILL BE HOT! USE HOTPADS!
7. Replace butter bin cover
securely (#2) before
using the popper dome
as a serving bowl! Once
cover is in place, be sure
that the dome handles are
still aligned properly into
the popper base handles.
Grasp firmly (See #3 in
illustration below) and
invert AWAY from your
body. When the popper is
upended and resting on
the butter bin cover, lift off
the popper base (#4).
CAUTION! Escaping
steam and residual oils
can drip and cause burns.
8. Salt and/or season as
desired and serve (#5).
Copyright 2011 DTX International
Page 6
OPERATING INSTRUCTIONS
HOW TO CLEAN & MAINTAIN YOUR POP FRENZY POPPER
IMPORTANT!
NO PARTS OF YOUR POPPER ARE DISHWASHER SAFE!
DO NOT USE ABRASIVES OF ANY KIND ON ANY PART OF YOUR POPPER!
ABRASIVE CLEANERS OR CLEANING TOOLS CAN DAMAGE NON-STICK
SURFACES AND PLASTIC PARTS.
ALWAYS ALLOW POPPER AND ALL PARTS TO COOL DOWN PRIOR TO
CLEANING.
We recommend cleaning your popper after each use.
How to clean your popper:
1. Wash popper dome and butter bin cover in warm water with a mild detergent and a soft cloth. Dry
thoroughly.
2. Wipe base and non-stick surfaces with a soft cloth wetted with warm water and a mild detergent.
Then rinse with a soft cloth and warm water and dry thoroughly. DO NOT IMMERSE POPPER
BASE!
Note: After prolonged use it is normal to notice a color change in the non-stick surface of your
popper. This can be removed with common household vinegar or lemon juice applied with a cloth.
Wipe clean and allow to dry thoroughly.
3. Unscrew the stir rod cap and remove the stir rod. Wash in warm water with a mild detergent and a
soft cloth. Dry thoroughly. Replace the stir rod onto the central turning mechanism by fitting the rod’s
middle notch into the groove on the mechanism. When reinstalled properly, the stir rod will lay flat
and balanced and will not touch the non-stick surface. Replace stir rod cap.
RECOMMENDED OIL AND POPCORN KERNEL AMOUNTS
DO NOT EXCEED 1 CUP OF UNPOPPED KERNELS PER BATCH! Your popper has a maximum
capacity of 6 quarts....using more than 1 cup of kernels could result in burning corn! Higher quality