DTS FOS 100 POWER SOLO FULL RGBW, FOS 100 POWER FULL RGBM User Manual
Made in Italy
FOS 100 POWER SOLO
FOS 100 POWER
User’s Manual rel 1.2 GB
D.T.S. Illuminazione s.r.l. – ITALY
http://www.dts-lighting.it
2
Le informazioni contenute in questo documento sono state attentamente redatte e
controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i
diritti sono riservati e questo documento non può essere copiato, fotocopiato, riprodotto
per intero o in parte senza previo consenso scritto della D.T.S .
D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche
estetiche, funzionali o di design a ciascun proprio prodotto. D.T.S non assume alcuna
responsabilità sull’uso o sull’applicazione dei prodotti o dei circuiti descritti.
The information contained in this publication has been carefully prepared and checked.
However, no responsibility will be taken for any errors. All rights are reserved and this
document cannot be copied, photocopied or reproduced, in part or completely, without
prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to any
of its products without prior notice. D.T.S. assumes no responsibility for the use or
application of the products or circuits described herein.
Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec
le plus grand soin. Nous déclinons toutefois toute responsabilité en cas d'éventuelles
inexactitudes. Tous droits réservés. Ce document ne peut être copié, photocopié ou
reproduit, dans sa totalité ou partiellement, sans le consentement préalable de D.T.S.
D.T.S. se réserve le droit d'apporter toutes modifications et améliorations esthétiques,
fonctionnelles ou de design, sans préavis, à chacun de ses produits. D.T.S. décline toute
responsabilité sur l'utilisation ou sur l'application des produits ou des circuits décrits.
Las informaciones contenidas en este documento han sido cuidadosamente redactadas
y controladas. Con todo, no se asume ninguna responsabilidad por eventuales
inexactitudes. Todos los derechos han sido reservados y este documento no puede ser
copiado, fotocopiado o reproducido, total o parcialmente, sin previa autorización escrita
de D.T.S.
D.T.S. se reserva el derecho a aportar sin previo aviso cambios y modificaciones de
carácter estético, funcional o de diseño a cada producto suyo. D.T.S. no se asume
responsabilidad de ningún tipo sobre la utilización o sobre la aplicación de los productos
o de los circuitos descritos.
3
INDEX:
1- SYMBOLS 4
2- GENERAL WARNING 4
3- GENERAL WARRANTY CONDITION 4
4- TECHNICAL FEATURES 5
5- MAIN ELECTRICAL CHARACTERISTICS 6
6- ACCESSORIES 7
7- IMPORTANT SAFETY INFORMATION 10
7.1 Fire prevention
7.2 Prevention of electric shock
7.3 Safety
8- INPUT / OUTPUT CONNECTIONS 11
9- DMX SIGNAL CONNECTION 13
9.1 DMX Addresses
9.2 Selecting the DMX address
10- FIRMWARE UPDATING 15
11- DISPLAY FUNCTIONS 16
12- SERVICE MENU 20
13- DMX PROTOCOL 22
4
1- SYMBOLS
Graphic symbols used on this manual
THIS SYMBOL INDICATES A HOT SURFACE
THIS SYMBOL INDICATES ELECTRIC SHOCK RISK
THIS SYMBOL INDICATES GENERAL RISK
THIS SYMBOL MEANS “DO NOT PLACE THE UNIT
ON INFLAMMABLE SURFACES”
THIS SYMBOL INDICATES THE MINIMUM
DISTANCE TO BE KEPT BETWEEN THE DEVICE
AND THE LIT OBJECT
2- GENERAL WARNING
Read the instruction contained in this user manual carefully, as they give important
information regarding safety during installation, use and maintenance.
The device is not for domestic use and must be installed by a qualified electrician or
experienced person.
Always disconnect the device from the mains before maintenance.
The device must always be equipped with an efficient ground connection.
3- GENERAL WARRANTY CONDITIONS
The unit is guaranteed for 36 months from the date of purchase against manufacturing
material defects.
F
!
10cm
5
4- TECHNICAL FEATURES
OVERVIEW
FOS 100 POWER is the most powerful model in the FOS line of compact LED bars,
designed for lighting and colouring large surfaces with a homogeneous projection.
FOS 100 POWER is ideal in a variety of applications, either indoor or outdoor, such as:
lighting building facades, monuments, public and commercial spaces; creating uniform
background colours and cycloramas, etc.
FOS 100 POWER is available in two versions.
FOS 100 POWER FULL COLOUR: 24 x Full Colour (RGBW) LEDs;
FOS 100 POWER RGBW: 96 x RGBW LEDs.
Three dedicated lenses sets (Spot, Medium flood, Wide flood) are available for each
model.
LED Technology
FOS 100 POWER FULL COLOUR:
24 x Full Colour (RGBW) LEDs; 7.028 Lux at 3 m;
16 million colours; linear colour temperature 2800°K – 6500°K
FOS 100 POWER RGBW:
96 x RGBW LEDs (24 x Red, 24 x Green, 24 xBlue, 24 x White); 10.528 Lux at 3 m;
16 million colours; linear colour temperature 2800°K – 6500°K
No infrared emission; no ultraviolet emission
LEDs average lifespan: 100.000 hours
Optical group
3 lenses sets available (Spot, Medium flood, Wide flood)
Control
Via any DMX lighting console (FOS 100 POWER SOLO)
Protection
IP65 protection level against the penetration of solids and liquids
Construction
FOS units are made on aluminium and steel
Connections
M16 male connector + cable (length 30 cm) connection system between Power supply
and LED bar (All versions).
POWERCON + XLR 5 poles cable connectors (FOS 100 POWER SOLO IP20);
HARTING 5 poles cable connector (FOS 100 POWER SOLO IP65)
Power supply
Electronic full range power supply AC 90-260V 50 / 60 Hz
Integrated power supply / LED controller (FOS 100 POWER SOLO)
(Z10 POWER IP20 or Z10 POWER IP65);
External dedicated Z40 power supply / LED controller (FOS 100 POWER)
6
Product codes:
03.LB030S.26.FW10 FOS 100 POWER SOLO IP20 FULLWHITE NARROW GREY SILVER
03.LB030S.26.FW25 FOS 100 POWER SOLO IP20 FULLWHITE MEDIUM GREY SILVER
03.LB030S.26.FW40 FOS 100 POWER SOLO IP20 FULLWHITE WIDE GREY SILVER
03.LB030S.FW10 FOS 100 POWER SOLO IP20 FULLWHITE NARROW BLACK
03.LB030S.FW25 FOS 100 POWER SOLO IP20 FULLWHITE MEDIUM BLACK
03.LB030S.FW40 FOS 100 POWER SOLO IP20 FULLWHITE WIDE BLACK
03.LB030S.F10 FOS 100 POWER SOLO IP20 FULLRGBW NARROW BLACK
03.LB030S.F25 FOS 100 POWER SOLO IP20 FULLRGBW MEDIUM BLACK
03.LB030S.F40 FOS 100 POWER SOLO IP20 FULLRGBW WIDE BLACK
03.LB030S.T10 FOS 100 POWER SOLO IP20 RGBW NARROW BLACK
03.LB030S.T25 FOS 100 POWER SOLO IP20 RGBW MEDIUM BLACK
03.LB030S.T40 FOS 100 POWER SOLO IP20 RGBW WIDE BLACK
03.LB031S.26.FW10 FOS 100 POWER SOLO IP65 FULLWHITE NARROW GREY SILVER
03.LB031S.26.FW25 FOS 100 POWER SOLO IP65 FULLWHITE MEDIUM GREY SILVER
03.LB031S.26.FW40 FOS 100 POWER SOLO IP65 FULLWHITE WIDE GREY SILVER
03.LB031S.FW10 FOS 100 POWER SOLO IP65 FULLWHITE NARROW BLACK
03.LB031S.FW25 FOS 100 POWER SOLO IP65 FULLWHITE MEDIUM BLACK
03.LB031S.FW40 FOS 100 POWER SOLO IP65 FULLWHITE WIDE BLACK
03.LB031S.F10 FOS 100 POWER SOLO IP65 FULLRGBW NARROW BLACK
03.LB031S.F25 FOS 100 POWER SOLO IP65 FULLRGBW MEDIUM BLACK
03.LB031S.F40 FOS 100 POWER SOLO IP65 FULLRGBW WIDE BLACK
03.LB031S.T10 FOS 100 POWER SOLO IP65 RGBW NARROW BLACK
03.LB031S.T25 FOS 100 POWER SOLO IP65 RGBW MEDIUM BLACK
03.LB031S.T40 FOS 100 POWER SOLO IP65 RGBW WIDE BLACK
03.LB031.26.FW10 FOS 100 POWER IP65 FULLWHITE NARROW GREY SILVER
03.LB031.26.FW25 FOS 100 POWER IP65 FULLWHITE MEDIUM GREY SILVER
03.LB031.26.FW40 FOS 100 POWER IP65 FULLWHITE WIDE GREY SILVER
03.LB031.FW10 FOS 100 POWER IP65 FULLWHITE NARROW BLACK
03.LB031.FW25 FOS 100 POWER IP65 FULLWHITE MEDIUM BLACK
03.LB031.FW40 FOS 100 POWER IP65 FULLWHITE WIDE BLACK
03.LB031.F10 FOS 100 POWER IP65 FULLRGBW NARROW BLACK
03.LB031.F25 FOS 100 POWER IP65 FULLRGBW MEDIUM BLACK
03.LB031.F40 FOS 100 POWER IP65 FULLRGBW WIDE BLACK
03.LB031.T10 FOS 100 POWER IP65 RGBW NARROW BLACK
03.LB031.T25 FOS 100 POWER IP65 RGBW MEDIUM BLACK
03.LB031.T40 FOS 100 POWER IP65 RGBW WIDE BLACK
5- MAIN ELECTRICAL CHARACTERISTICS (FOS 100 POWER SOLO)
Input Voltage Range : Vin 90 - 260 Vac
Frequency : 50 / 60 Hz
Power Consumption Range : 10 - 200 W
Power Factor (Pf) : 0.95 electronic PFC controller
Efficiency : 90% typical
Control Input:
Control Signal : DMX 512
Dimming System : Constant Current PWM
Address Range : DMX 512 channels addressable by display
7
6- ACCESSORIES
As standard (IP20)
1 x User’s Manual
1 x POWERCON IN male cable connector (FOS 100 POWER SOLO)
(D.T.S. Code: 0520P014)
1 x POWERCON OUT male cable connector (FOS 100 POWER SOLO)
(D.T.S. Code: 0520P029)
1 x XLR 5 poles male cable connector (D.T.S. Code: 0508B028)
1 x XLR 5 poles female cable connector (D.T.S. Code: 0508B027)
1 x Joint/spacer (D.T.S. Code: 00M09519.46 black finish; 00M09519.44 grey finish) with
2 x knobs (D.T.S. Code: 0511P014)
As standard (IP65)
1 x User’s Manual
1 x HARTING 5 poles male cable connector (D.T.S. Code: 02LD0093.1)
1 x Joint/spacer (D.T.S. Code: 00M09519.46 black finish; 00M09519.44 grey finish) with
2 x knobs (D.T.S. Code: 0511P014)
Optional (on request)
Lenses set Spot (FOS 100 POWER FULLCOLOUR) (D.T.S. Code 03.LK.107)
Lenses set Medium flood (FOS 100 POWER FULLCOLOUR) (D.T.S. Code 03.LK.108)
Lenses set Wide flood (FOS 100 POWER FULLCOLOUR) (D.T.S. Code 03.LK.109)
Lenses set Medium flood (FOS 100 POWER RGBW) (D.T.S. Code 03.LK.114)
Lenses set Wide flood (FOS 100 POWER RGBW) (D.T.S. Code 03.LK.115)
G60 ‘’C’’ Clamp (Max. load 50 Kg) *Black (D.T.S. Code 0521A004)
G50 ‘’C’’ Clamp (Max. load 10 Kg) *Black (D.T.S. Code 0521A012)
M16 female (9 poles) cable connector (D.T.S. Code 0508B106)
M16 male (9 poles) cable connector (D.T.S. Code 0508B105)
Z40 Power supply / LED controller (FOS 100 POWER) (D.T.S. Code 03.LA.120)
8
1
6
0
m
m
140 mm
DIMENSIONS
FOS 100 POWER SOLO
Unit Dimensions Packing Dimensions
(LxWxH) (LxWxH)
990 x 100 x 84,5 mm 1060 x 160 x 200 mm
Weight Weight
7 Kg 8,5 Kg
990 mm
100 mm
8
4
,
5
m
m
9
FOS 100 POWER
Unit Dimensions Packing Dimensions
(LxWxH) (LxWxH)
990 x 56 x 84,5 mm 1060 x 160 x 200 mm
Weight Weight
5,5 Kg 7 Kg
1
6
0
m
m
140 mm
990 mm
56 mm
8
4
,
5
m
m
10
7- IMPORTANT SAFETY INFORMATION
7.1 Fire prevention:
Never locate the fixture on any flammable surface.
Minimum distance from flammable materials: 10 cm.
Minimum distance from the closest illuminable surface: 10 cm.
7.2 Prevention from electric shock:
High voltage is present inside the unit.
Unplug the unit prior to performing any operation which involves touching the inside of
the unit.
This equipment must be grounded, do not connect to non-grounded supplies.
The use of a thermal magnetic circuit breaker is recommended for each FOS 100
POWER SOLO unit.
Use only AC supplies 90-260V, 50 / 60 Hz.
FOS 100 POWER SOLO (IP20) should never be located in position exposed to rain or in
areas of extreme humidity.
A good air ventilation is essential for proper equipment work.
7.3 Safety:
The external surface of the unit may exeed 50°C; never handle the unit until at
least 5 minutes have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exeed 40°C and should not be lower than -10°C.
F
!
10cm
Loading...