DTS DIVE 6 User Manual

DIVE 6 R FULL COLOR
DIVE 6
DIVE 6 FULL COLOR
User’s Manual Rel 1.2
D.T.S. Illuminazione srl - ITALY http://www.dts-lighting.it
GB
Made in Italy
2
non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo
documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso
scritto della D.T.S .
DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di
design a ciascun proprio prodotto. D.T.S non assume alcuna responsabilità sull’uso o sull’applicazione dei
prodotti o dei circuiti descritti.
The information contained in this publication has been carefully prepared and checked. However, no
responsibility will be taken for any errors. All rights are reserved and this document cannot be copied,
photocopied or reproduced, in part or completely, without prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products
without prior notice. D.T.S. assumes no responsibility for the use or application of the products or circuits
described herein.
DIVE 6
Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec le plus grand
soin. Nous déclinons toutefois toute responsabilité en cas d'éventuelles inexactitudes. Tous droits
réservés. Ce document ne peut être copié, photocopié ou reproduit, dans sa totalité ou partiellement,
sans le consentement préalable de .
D.T.S.
de design, sans préavis, à chacun de ses produits. décline toute responsabilité sur l'utilisation ou
Todos los derechos han sido reservados y este documento no puede ser copiado, fotocopiado
D.T.S.
estético, funcional o de diseño a cada producto suyo. no se asume responsabilidad de
se réserve le droit d'apporter toutes modifications et améliorations esthétiques, fonctionnelles ou
D.T.S.
sur l'application des produits ou des circuits décrits.
Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y
controladas. Con todo, no se asume ninguna responsabilidad por eventuales inexactitudes.
o reproducido, total o parcialmente, sin previa autorizaciónescrita de
se reserva el derecho a aportar sin previo aviso cambios y modificaciones de carácter
D.T.S.
ningún tipo sobre la utilización o sobre la aplicació
n de los productos o de los circuitos descritos.
D.T.S
D.T.S.
3
DESCRIPTION
DIVE 6 is a compact LED projector designed for underwater recessed installation in fountains, swimming pools, etc.
DIVE 6 is made of bronze and stainless steel, offering an IP68 protection level, and it can be installed at a max depth of 2 m, immersed either in water or sea water. DIVE 6 is a modern alternative to conventional compact light sources, offering a new approach to underwater lighting in terms of light quality, flexibility of use, energy savings and component duration. DIVE 6 features 6 x 3W Full Colour LEDs. The Full Colour LED’s guarantee high quality colour mixing (significantly superior to conventional light sources and other systems using normal LED’s) Colour synthesis takes place in fact inside every single LED s, capable of independently generating up to 16 million colours.
The DIVE 6 light source is able therefore to project a perfectly uniform beam of light onto objects and surfaces, no matter what colour is used. Luminosity at 2 m, with spot lenses, is 500 Lux. Colour temperature can also be regulated with linear variations between 3200°K and 6500°K, passing progressively from warmer tones to cooler ones. 16 different whites are also selectable by the user (Z60 / Z30 Power supply) Three interchangeable lens fittings are available: Spot, Medium Flood and Wide Flood. These three lenses offer different aperture angles for the light beam, always ensuring constantly regular and uniform projection on objects and surfaces. The DIVE 6 can be remotely powered and controlled by two dedicated external power suppliers / controllers: Z60 (up to 10 units) or Z30 (up to 5 units). DIVE 6 R units connected to Z60 or Z30 can also be remote-controlled using the USITT DMX 512 standard digital communication protocol.
DIVE 6
If you use the DIVE 6 out of water or immersion in not public areas, ONLY in these cases you can use the Z1 or Z4.
DIVE 6 is available in two models:
DIVE 6 R ( recessed ) is compact LED projector designed for underwater recessed installation in fountains, swimming pools, etc.
( 03.LP012.F10 ) DIVE/R 6 FULL COLOR P5 NARROW ( 03.LP012.F25 ) 6 FULL COLOR P5 ( 03.LP012.F40 ) 6 FULL COLOR P5
DIVE 6 ( bracket ) is compact LED projector designed for underwater installation in fountains, swimming pools, etc.
( 03.LP004.F10 ) DIVE 6 FULL COLOR P5 NARROW C/STAFFA ( 03.LP004.F25 ) 6 FULL COLOR P5 ( 03.LP004.F40 ) DIVE 6 FULL COLOR P5 WIDE C/STAFFA
DIVE/R MEDIUM DIVE/R WIDE
DIVE MEDIUM C/STAFFA
4
LED technology
6 x 3 W Full Colour LEDs; 500 Lux / 2 m No infrared emission; no ultraviolet emission; LEDs average lifespan: 100.000 hours
Optical units
3 lenses sets available (Spot, Medium flood, Wide flood)
Control
Via any DMX lighting console
Protection
IP68 protection level (max immersion depth: 2 m)
Construction
Bronze and stainless steel
Power suppliers / LED controllers
Z60 (max 10 units) or Z30 (max 5 units)
Connection Provided with 5 mt cable and with a RJ12 connector Weight
3,4 Kg
DIVE 6
ACCESSORIES
Lenses sets
• Spot (Cod. 03.LK.049)
• Medium flood (Cod. 03.LK.050)
• Wide flood (Cod. 03.LK.051)
Power supply / LED controllers
• Z60 with R12 connectors (Cod. 03.LA.053)
• Z60 with screws connectors (Cod. 03.LA.076)
• Z30 with R12 connectors (Cod.03.LA.072)
• Z30 with screws connectors (Cod. 03.LA.077)
IR receiver for Z60 / Z30 IR remote control for Z60 / Z30 Connectors / tools
• RJ12 6-pole male connector (Cod. 0508B058)
• Crimping tool for RJ connectors (Cod. 0508A036)
Outer case IP65 (Cod.03.LA.078)
MAIN ELECTRICAL CHARACTERISTICS:
Input: Constant current power supply (350-500 mA) Consumption : 18-30 W
Loading...
+ 8 hidden pages