DTS DIVE/R 18 RGB, DIVE 18 RGB User Manual

Page 1
DIVE/R 18 RGB
DIVE 18
DIVE 18 RGB
User’s Manual Rel 1.3
D.T.S. Illuminazione srl - ITALY http://www.dts-lighting.it
GB
Made in Italy
Page 2
2
non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo
documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso
scritto della D.T.S .
DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di
design a ciascun proprio prodotto. D.T.S non assume alcuna responsabilità sull’uso o sull’applicazione dei
prodotti o dei circuiti descritti.
The information contained in this publication has been carefully prepared and checked. However, no
responsibility will be taken for any errors. All rights are reserved and this document cannot be copied,
photocopied or reproduced, in part or completely, without prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products
without prior notice. D.T.S. assumes no responsibility for the use or application of the products or circuits
described herein.
DIVE 18
Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec le plus grand
soin. Nous déclinons toutefois toute responsabilité en cas d'éventuelles inexactitudes. Tous droits
réservés. Ce document ne peut être copié, photocopié ou reproduit, dans sa totalité ou partiellement,
sans le consentement préalable de .
D.T.S.
de design, sans préavis, à chacun de ses produits. décline toute responsabilité sur l'utilisation ou
Todos los derechos han sido reservados y este documento no puede ser copiado, fotocopiado
D.T.S.
estético, funcional o de diseño a cada producto suyo. no se asume responsabilidad de
se réserve le droit d'apporter toutes modifications et améliorations esthétiques, fonctionnelles ou
D.T.S.
sur l'application des produits ou des circuits décrits.
Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y
controladas. Con todo, no se asume ninguna responsabilidad por eventuales inexactitudes.
o reproducido, total o parcialmente, sin previa autorizaciónescrita de
se reserva el derecho a aportar sin previo aviso cambios y modificaciones de carácter
D.T.S.
ningún tipo sobre la utilización o sobre la aplicació
n de los productos o de los circuitos descritos.
D.T.S
D.T.S.
Page 3
3
DESCRIPTION
DIVE 18 is a compact LED projector fitted with a fixing bracket, designed for underwater installation in fountains, swimming pools, etc.
DIVE 18 is made of bronze and stainless steel, offering an IP68 protection level, and it can be installed at a max depth of 2 m, immersed either in water or sea water. DIVE 18 is a modern alternative to conventional compact light sources, offering a new approach to underwater lighting in terms of light quality, flexibility of use, energy savings and component duration.
DIVE 18 features 18 x 1W P4 LEDs (6 x Red, 6 x Green, 6 x Blue). The even distribution pattern featuring the same quantity of red, green and blue LED’s guarantees high mixing quality for colours and a uniform projection on objects and surfaces. Up to 16 million colours can be generated. Luminosity at 2 m, with spot lenses, is 2.500 Lux.
DIVE 18
Colour temperature can also be regulated with linear variations between 3200°K and 6500°K, passing progressively from warmer tones to cooler ones. 16 different whites are also selectable by the user. Three interchangeable lens fittings are available: Spot, Medium Flood and Wide Flood. These three lenses offer different aperture angles for the light beam, always ensuring constantly regular and uniform projection on objects and surfaces. The DIVE 18 can be remotely powered and controlled by two dedicated external power suppliers / controllers: Z60 (up to 10 units) or Z30 (up to 5 units). DIVE 18 units connected to Z60 or Z30 can also be remote-controlled using the USITT DMX 512 standard digital communication protocol.
If you use the DIVE 18 out of water or immersion in not public areas, ONLY in this case you can use the Z1 or Z4.
DIVE 18 is available in two models:
DIVE/R 18 ( recessed ) is compact LED projector designed for underwater recessed installation in fountains, swimming pools, etc.
( 03.LP010.T10 ) DIVE/R 18 RGB P4 NARROW ( 03.LP010.T25 ) ( 03.LP010.T40 )
DIVE/R 18 RGB P4 MEDIUM DIVE/R 18 RGB P4 WIDE
DIVE 18 ( bracket ) is compact LED projector designed for underwater installation in fountains, swimming pools, etc.
( 03.LP002.T10 ) DIVE 18 RGB P4 NARROW C/STAFFA ( 03.LP002.T25 ) ( 03.LP002.T40 ) DIVE 18 RGB P4 WIDE C/STAFFA
DIVE 18 RGB P4 MEDIUM C/STAFFA
Page 4
4
LED technology LED technology 18 x 1 W P4 LEDs (6 x Red, 6 x Green, 6 x Blue); 2.500 Lux / 2 m
No infrared emission; no ultraviolet emission; LEDs average lifespan: 100.000 hours
Optical units 3 lenses sets available (Spot, Medium flood, Wide flood) Control Via any DMX lighting console Protection IP68 protection level (max immersion depth: 2 m)
For IP68 applications in public areas, the only allowed power supplies are Z60 and Z30.
Construction Bronze and stainless steel Power suppliers / LED controllers Z60 (max 10 units) or Z30 (max 5 units) Connection Provided with 5 mt of cable and with a RJ12 connector Weight 6,3 Kg
ACCESSORIES
Lenses sets
• Spot (Cod. 02LK046)
• Medium flood (Cod. 02LK047)
• Wide flood (Cod. 02LK048)
DIVE 18
Power supply / LED controllers
• Z60 with R12 connectors (Cod. 03.LA.053)
• Z60 with screws connectors (Cod. 03.LA.076)
• Z30 with R12 connectors(Cod.03.LA.072)
• Z30 with screws connectors (Cod. 03.LA.077)
IR receiver for Z60 / Z30 IR remote control for Z60 / Z30
Connectors / tools • RJ12 6-pole male connector (Cod. 0508B058)
• Crimping tool for RJ connectors (Cod. 0508A036)
Outer case IP65 (Cod. 03.LA.059)
MAIN ELECTRICAL CHARACTERISTICS
Input: Constant current power supply (350-500 mA) Power Consumption: 18-30 W
Page 5
IMPORTANT SAFETY INFORMATION
5
Fire prevention:
Never locate the fixture on any flammable surface. Minimum distance from flammable materials: 10 cm
Safety:
The external surface of the unit may exeed 50°C; never handle the unit until at least 5 minutes have elapsed since the unit was turned off. The ambient temperature should not exeed 40°C and should not be lower than -10°C
UNIT DIMENSIONS
DIVE 18
200mm
DIVE 18 RGB
138 mm
224 mm
DIVE R 18 RGB
300 mm
83 mm
190 mm
Page 6
6
WIRING DIAGRAM
DIVE 18 LED PROJECTOR is provided with 2 x RJ12 male cable connectors
DIVE 18
RJ12 : 6P6C
6P6C indicates 6 positions 6 cables
Power supply LED output connector
1 2 3 4 5 6
6
1
6-pin Male (RJ12)
Modular Plug
Pin 1 = RED + Pin 2 = RED ­Pin 3 = GREEN + Pin 4 = GREEN ­Pin 5 = BLUE + Pin 6 = BLUE -
6-pin Female (RJ12)
For application where IP68 2m. rating is not necessary, DIVE 18 LED PROJECTOR cabling connection can be done with a standard UTP B2 category 5E cable. The maximum distance between power supply and the DIVE 18 unit should not exceed 100 meters.
TIA/EIA 568-
For IP68 2m. rating application, D.T.S. reccomed the use of a IP68 cable as the 10XAWG26 multipolar black outdoor cable (D.T.S. Code: 0509C061). The maximum distance between power supply and the DIVE 18 unit should not exceed 100 meters.
Page 7
LED UNITS WIRING CONNECTION
03.LA.053 (RJ12 OUTPUT)
6
1
6-pin Female (RJ12)
7
LEDs OUT 7
DIVE 18
DIVE 18 RGB
DIVE R 18 RGB
IMPORTANT:
Each DIVE 18 UNIT need 2 x Z60 outputs in order to be properly controlled.
The Total number of DIVE 18 connectable to Z60 is 10 pcs The Total number of DIVE 18 connectable to Z30 is 5 pcs
Never plug in a new unit when the power supply is turned on.
DIVE R 18 RGB
Page 8
POWER SUPPLY WIRING CONNECTIONS
8
DIVE 18
6
1
6-pin Female (RJ12)
DIVE R 18 RGB
1
2
D.T.S. T-BOX
CODE 03.LA001
INPUT
OUT 1
T BOX
OUT 2
INPUT
OUT 2
OUT 1
INPUT
OUT 1
OUT 1
T BOX
OUT 2
INPUT
T BOX
IMPORTANT:
The maximum number of DIVE 18 UNIT connectable to the Z1 Power supply is 2 pcs.
Never plug the cable coming from the Power supply into OUT 1 or OUT 2 of the T-BOX when other DIVE 18 units are connected, because a wrong connection can seriously damage the lamps.
Never plug in a new DIVE 18 unit when the power supply is turned on.
DIVE R 18 RGB
OUT 2
Page 9
WIRING CONNECTIONS
9
DIVE 18
DIVE R 18 RGB
OUT 2
OUT 1
T BOX
INPUT
Z4 DMX-512 LED driver
Code 03.LA.014
DIVE R 18 RGB
OUT 2
OUT 1
T BOX
INPUT
DIVE 18 RGB DIVE 18 RGB
INPUT
T BOX
OUT 1
OUT 2
T BOX
INPUT
OUT 1
OUT 2
IMPORTANT:
The maximum number of DIVE 18 LED PROJECTOR connectable to the Z4 Power supply is 2 pcs each LED output (8 pcs totally). Never plug in a DIVE 18 unit when the power supply is turned on.
Page 10
NOTES
10
DIVE 18
Page 11
NOTES
11
DIVE 18
Page 12
The information contained in this publication has been carefully prepared and checked. However, no responsibility will be taken for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced, in part or completely, without prior written consent from D.T.S. D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products without prior notice. D.T.S. assumes no responsibility for the use or application of the products or circuits described herein.
MADE IN ITALY
*0517I116*
0517I116
D.T.S. Illuminazione s.r.l - Via Fagnano Selve 10-12-14 47843 - Misano Adriatico (RN) Italy
Tel. +39 0541 611131 Fax +39 0541 611111 info@dts-lighting.it www.dts-lighting.it
Loading...