DSX Access System, Inc. algo 8028 User Manual

Empowered by Innovation

For additional resources, visit our Technical Support site on the web at http://www.necdsx.com.

Algo 8028

SIP Doorphone Manual

P/N 1093100ALGO

August 19, 2015

Printed in U.S.A.

This manual has been developed by NEC Corporation of America. It is intended for the use of its customers and
service personnel, and should be read in its entirety before attempting to install or program the system. Any
comments or suggestions for improving this manual would be appreciated. Forward your remarks to:

NEC Corporation of America

General Channel

Shelton, CT 06484

Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation
with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Corporation of
America has no obligation to provide any updates or corrections to this manual. Further, NEC Corporation of America also
reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No
representation is made that this manual is complete or accurate in all respects and NEC Corporation of America shall not be
liable for any errors or omissions. In no event shall NEC Corporation of America be liable for any incidental or consequential
damages in connection with the use of this manual. This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written consent of
NEC Corporation of America.

©2015 by NEC Corporation of America. All Rights Reserved.

Printed in U.S.A.

Contents

Chapter 1: Algo 8028 SIP Doorphone....................................................................5

Description............................................................................................................................................................ 6

Door Box, Algo 8028 SIP Doorphone..................................................................................................... 6

Programming....................................................................................................................................................... 11

Programming the Algo 8028 SIP Doorphone........................................................................................ 11

Operation............................................................................................................................................................. 17

Door Box, Algo 8028 SIP Doorphone................................................................................................... 17

Chapter 2: Program 1000...................................................................................... 19

Configuration.......................................................................................................................................................20

1114: Door Chimes.................................................................................................................................20

Timers..................................................................................................................................................................22

1605: Control Timers..............................................................................................................................22

VoIP Profile........................................................................................................................................................ 23

1815: DTMF........................................................................................................................................... 23

| Contents | 3

Chapter 3: Program 2000...................................................................................... 25

Configuration.......................................................................................................................................................26

2101: Station Type..................................................................................................................................26

2106: VoIP.............................................................................................................................................. 28

2113: Groups...........................................................................................................................................28

Department Groups............................................................................................................................................. 30

2301: Group Identification..................................................................................................................... 30

Chapter

1

Algo 8028 SIP Doorphone

Description

Door Box, Algo 8028 SIP Doorphone

Use the Algo 8028 SIP Doorphone when a SIP Door Box is the right solution for
monitoring an entrance door.

Requires software version 3.43 or higher.

Description

The Algo 8028 SIP Doorphone is a SIP-based Door Box used to monitor an entrance door and is an alternative to
the traditional analog DSX Door Box (P/N 922450). The 8028 consists of a Door Station (Door Box), a Control
Unit, and a Power Supply. Just as with the analog DSX Door Box, a visitor at the door presses the doorphone
call button (like a door bell) to send chime tones or ringing to all extensions programmed to receive them. To
answer the chime or ringing, the called DSX extension user just lifts the handset. This lets the extension user talk
to the visitor at the doorphone. The doorphone is convenient to have at a delivery entrance, for example. Company
personnel don't have to monitor the delivery entrance; they just answer the doorphone instead.

The Algo 8028 SIP Doorphone installs as a VoIP extension programmed as a Door Box. It requires the
installation of a VoIP Daughter Board (VOIPDB). The VOIPDB (P/N 1091044) provides 8 maximum VoIP
gateway ports on DSX-40; 16 maximum on DSX-80/160. Available gateway ports may be restricted by licensing.

| Algo 8028 SIP Doorphone | 6

Note: The 8028 SIP Doorphone Installation and User Guide is an important companion document to the
doorphone. Be sure you have read this manual before attempting to install the doorphone on DSX.

8028 SIP Doorphone Relays

The 8028 Control Unit offers a flexible relay configuration for controlling an auxiliary device such as an electric
door strike. Any keyset extension that receives doorphone chimes or ringing can operate an 8028 Control Unit
relay. Relay features include:

•

Fail Locked (Fail Secure) electric door strike control. These types of strikes remain locked during a power
failure.

•

Fail Unlocked (Fail Safe) electric door strike control. These strikes are unlocked during a power failure.

•

Dry or wet relay contact applications.

In a dry application, relay contacts are unpowered and only provide contact closure to the connected
device.

| Algo 8028 SIP Doorphone | 7

In a wet application, relay contacts are powered by the built-in 24 VDC/300mA auxiliary power supply or
by a customer-provided auxiliary supply. In these applications, it is required that current flow through the
contacts to the connected device for proper operation.

The maximum capacity of the 8028 Control Unit relays is 1A@30 VDC.

•

Push to activate with timed deactivation. A keyset user presses a soft key to activate the relay, and the relay
automatically deactivates after a programmed interval.

•

Push to activate with push to deactivate operation. A keyset user presses a soft key to activate the relay, and
then presses another soft key to deactivate it.

The equipment you connect to a control relay must be compatible with the applications and relay specifications
stated in the 8028 SIP Doorphone Installation and User Guide.

8028 SIP Doorphone Alerts

The DSX system uses Ring Groups to control doorphone alerts. When a visitor at the door presses the doorphone
call button, the doorphone will alert (chime or ring) all the extensions in the Ring Group to which the doorphone
belongs. For example, if doorphone 402 and extensions 301 and 302 are in Ring Group 1, pressing the call button
alerts 301 and 302.

If the DSX keyset being chimed or rang has a backlit display, the backlight will turn on when the chime begins.
During the chime, the keyset display will show: Chime from xxx (xxx = the doorphone extension number or
name) to indicate which doorphone is calling. If the chime or ring is unanswered, the backlight will remain on for
the 1605-06: Door Alert Timer [System: Timers: Features: Control (1605): Door Alerting] on page 22 Door
Alert interval. See Programming for this Feature for more on the Door Alert interval.

8028 SIP Doorphone Connections
Basic Connections

| Algo 8028 SIP Doorphone | 8

Using the diagram above and your 8028 SIP Doorphone Installation and User Guide as references, connect the
doorphone as follows:

1.

Using a suitable length of 24AWG twisted pair cable, connect the red and green terminals on the supplied
modular jack to the CTRL terminals on the Door Station. Polarity doesn't matter.

2.

Using the supplied 6-Wire Modular Cable, connect the station jack on the modular jack to the station jack on
the 8028 Control Unit.

3.

Connect the Control Unit to the DSX LAN.

• Connect one end of a CAT5 Ethernet cable to an available switch port on the DSX LAN.

• Connect the other end of cable to the Ethernet jack on the 8028 Control Unit.

4.

Plug the power supply input cable into the power input jack on the back of the Control Unit.

5.

Plug the power supply power cord into a suitable 120VAC receptacle.

| Algo 8028 SIP Doorphone | 9

Verify the 8028 Control Unit Front Panel LEDs

After about 30 seconds, verify the Control Unit front panel LEDs. The LEDs will be different after you program
the doorphone and the DSX.

Power: On steady then blinks off briefly every 2 seconds.

Telephone: Off.

Door Station: On steady.

Lock: Off

Get the 8028 Control Unit IP Address

You must have the 8028 Control Unit IP address in order to program the unit. If the 8028 Control Unit was at
default when you plugged it in, you can have the unit speak the IP address (obtained via DHCP from the DSX
LAN) by pressing the doorphone call button. If not, you can do one of the following:

•

Default the 8028 Control Unit following the instructions in the 8028 SIP Doorphone Installation and User
Guide.

• Download the 8028 Locator Tool from http://www.algosolutions.com/8028locator. It will scan your LAN and
identify each 8028 Control Unit installed.

• Review the site's router log. To help with identification, the MAC address for the 8028 Control Unit is printed
on a label affixed to the bottom of the unit.

Conditions and Defaults
Conditions

• None

Default Setting

• No SIP doorphones are enabled in programming.

Other Related Features
Features

• Call Coverage Keys

• Set up a Call Coverage key for the doorphone Ring Group to monitor Ring Group Ringing from the

doorphone. This allows extensions that are not members of the Ring Group to answer ringing doorphone
calls. After answering, extensions with Call Coverage keys to the doorphone Ring Group can also activate
the relay. Call Coverage keys do not work with doorphone chimes.

• Call Forwarding

• An extension user cannot forward a call to a doorphone.

• Hotline

• Set up a Hotline key for the doorphone extension number to (1) call the doorphone and (2) provide a

doorphone BLF. The Hotline key cannot answer doorphone calls.

• Message Waiting

• An extension user cannot leave a Message Waiting at a doorphone.

| Algo 8028 SIP Doorphone | 10

• Paging

• Door Box chimes 1-3 can broadcast over the External Paging speakers. An extension user can press

INTERCOM and dial * 0 to answer the chimes and use their soft keys to control the associated relay.

• Single Line Telephones

• Single line telephones can only receive Door Chime type 0 (normal ring). While connected to the

doorphone, an SLT can hookflash to control the 8028 Control Unit relay.

• Transfer

• An extension user cannot Transfer a call to a doorphone.

IntraMail Features

• None.