DSPPA MP 200P II, MP 300P II, MP1000P II, MP 600P II Owner's Manual
1
P.A. SERIES
MIXING AMPLIFIER MP 200PⅡ
MP 300PⅡ
MP 600PⅡ
MP1000PⅡ
POWER
ON OFF
2 4 6 8 10
OUTPUT
MIX AMPLIFIER
MIC1
MIN MAX MIN MAX
TONE
BASS TREBLE
2
1 10 0
3
5 6
8
9
7
4
AUX1
2
1 10 0
3
5 6
8
9
7
4
AUX2
2
1 10 0
3
5 6
8
9
7
4
MIC2
2
1 10 0
3
5 6
8
9
7
4
MIC3
2
1 10 0
3
5 6
8
9
7
4
MIC1
MP-200PⅡ
OWNER’S MANUAL
Before operating, please read this manual carefully.
FEATURES
l Three Mic inputs, two Aux inputs, and one Aux output for link
l Transformer with 100V, 70V rated power and 4 ohms rated resistance output
(balanced, no ground)
l Mic 1 with muting function, for making a broadcast with the highest level of
priority
l Individual volume control for each channel
l Bass and treble tone control
l A five-element LED level meter, easy for monitoring sound level
l Output short circuit protection and alarm
2
FRONT PANEL
POWER
ON OFF
2 4 6 8 10
OUTPUT
MIX AMPLIFIER
MIC1
MIN MAX MIN MAX
TONE
BASS TREBLE
2 1 10 0 3 5 6 8 9 7 4
AUX1
2 1 10 0 3 5 6 8 9 7 4
AUX2
2 1 10 0 3 5 6 8 9 7 4
MIC2
2 1 10 0 3 5 6 8 9 7 4
MIC3
2 1 10 0 3 5 6 8 9 7 4
MIC1
MP-200PII
1. LED power indicator (for main power)
2. LED level meter
Indicating output level.
3. Power switch (for main power)
4. Bass control
Adjusting bass response.
5. Treble control
Adjusting treble response.
6. Mic volume control
Adjusting microphone volume.
7. AUX volume control
Adjusting AUX input volume.
8. Mic 1 input jack
Connecting to microphone of unbalanced 30～600Ω with 1/4″phone plug. The muting function is
activated while the signal is sent to Mic
Note:
When all five elements of the LED level meter remain lit, it indicates that the sound is distorted.
In such case, adjusting each volume control button until LED element 4 (+8dB) and LED element
5 (+10dB) flash.
REAR PANEL
COM
4-16
Ω
70V
100V
CAITION !
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC 220V
50Hz
MIC2
MIC3
AUX1
AUX2
OUT
-54dB
10KΩ
-54dB
10KΩ
INPUT
MUTE
1. AC fuse
Preventing the damage caused by excessive AC current flow
2. AC power connector
Connecting to AC power source.
3. Mic 2 input & Mic 3 input
Connecting to the microphones at unbalanced 30～600 Ω with 1/4″phone plug. Signals from Mic
2 and Mic 3 will be muted by the signal from Mic1.
4. AUX 1 input & AUX 2 input
32 4
5
6 7
8
1
1
2
6
5 4 3 7
Loading...