Page 1
MP2708 6 Zones Mixer Amplifier with
Timer&USB&Tuner&Bluetooth
Support USB/SD/MP3/AM & FM/Bluetooth/schedule player
6 zones output with separated switch control
4.3” TFT capacitance touch screen.
Touch and button-pressing control. Can operate with physical buttons when touch
screen is broken.
Built-in 4G MP3 program memory.
Built-in radio; it can be manually / automatically searched and can store 40 radio
channels.
Built-in Bluetooth receiver module.
1 AUX ,1 Mic input ,1 AUX output.
Separate volume control for MP3/FM/Bluetooth, AUX, Mic inputs
With Bass & Treble sound effect adjustment, with Master Volume control for all output
Weekly programmable schedule set with more than 100 daily programmable schedule
points. It can remember where it ends abnormally when it restarts. More than 8
different plans for schedule set.
Two kinds of control modes — schedule and manual.
Mic input with muting priority
Power output: 70V/ 100V
Features
Page 2
Item
MP2708
MP2715
MP2725
MP2735
MP2745
MP2765
Rate power
80W
150W
250W
350W
450W
650W
Speaker Outputs
70V
70V
70V
100V
100V
100V
Harmonic Distortion
＜ 0.5%（1kHz , 1/3 rate power）
AUX Output
100Ω，1V ( 0dBV )
Input
Mic: 600Ω； 8mV (±10%)
Line: 10kΩ, 300mV (±10%), unbalanced
Line Freq.response
50Hz-20kHz（±3dB）
Mic Freq.response
40Hz-16kHz（±3dB）
Harmonic distortion
< 0.5%（1kHz , 1/3 rated power）
S/N Ratio
Mic: 70dB
Line: 80dB
Tone
Bass: ±10dB（100Hz）
Treble: ±10dB（10kHz）
Protection
AC fuse, DC output protection，overload protection.
Power Supply
AC220-240V/50-60Hz
Power Consumption
120W
220W
350W
450W
560W
800W
Size(L×W×H)
418×338×88mm
Specification
The Integrated Mixer Amplifier MP2708 is a 6 zones mix amplifier integrated with the
functions of U disk, SD card, tuner, radio, Bluetooth, zones and timer. With various
functions, including song files playing, radio, schedule time etc. Touch screen control, all
graphical interface, the operation is very simple and user-friendly.The device can meet the
requirements of the users and can be widely applied.
Description
Page 3
Front panel
1. Power switch
2. Power indicator
3. USB port
It is used to connect external MP3 program memory and it can be connected to ordinary flash
drive.
(Note: Before inserting and pulling out the flash drive, please turn off the machine power first.）
4. Often-used function selection buttons
Often-used hot keys, they can be used when the touch screen is in fault.
5. Display screen
Touch control, human-computer interaction interface; MP3 playing mode.
6. MP3/FM/Bluetooth volume control button
7. Aux volume control button
Adjust the volume of the aux input signal.
8. Microphone volume control button
Adjust the volume of the Mic
9. Microphone interface
Connect the microphone; the microphone interface signal has priority output.
10. Button for all volume together
Adjust the total output of the amplifier output
11. Treble button
Adjust the treble pitch
12. Bass button
Adjust the bass pitch
Attention: The output level meter’s 5 indicators’ lightening means it is overloaded, in such case,
the relevant volume should be adjusted so that the 4th or 5th indicator will flash.
Loading...