DSG SHUTTER User Manual

Bluetooth Shutter Manual

Product Instruction

Specification:

Model No: shutter
Dimension: 60mm*26mm*7mm
Battery: 220Mah*1 button cell. Can be change
Communication distance: up to 30M

Bluetooth Version: 3.0+EDR

Bluetooth Version: V3.0+HS
System: Coompatible with Android 3.0 or newer & IOS 6.0 or newer
Working current: 1.5mA
Working frequency:2.4G
Standby current: 55uA
Weight: 12G

2.402GHz-2.480GHz

Battery disassembly graph:

Insert the coin into the back then turn left

How to use

1.On/off
Toggle switch to boot, after ther indicator lights 2 seconds and it will go out, then flashing
with 1 second cycle, enters the searching state.

2.Bluetooth Pairing
Open the bluetooth device of mobile phone and search, when you can find the keyboard
symbol and it will display “shutter”, then click “pairs connected”, the lights go out.

3.Take Photos
Open the camera of mobile phone, short press the “shutter” button, while the indicator
lights flashing. Make sure the camera function setting of mobile phone before taking
photos, check the “valume button” is of camera function setting or not, and it will not take
photos while pressing the “shutter button” but just enlarging the photos.

4.Cancel pairing:Long press “shutter button” for 3-5 seconds. It will be disconnected with
the mobile phone, keep the state n searching.

5.After 5 minutes without working, the machine will enter a dormant state, continue to
use by the shutter button, suggest to turn it off when donnot use it.

FCC Statement

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation