Nanjing DseeLab Digital Technology Ltd.
Holographic
Dsee-65H
Intelligent Display
INSTRUCTION MANUAL
Nanjing DseeLab Digital Technology Ltd.
Catch Your Eyes with Great Varieties
1
Do not dismantle the device,
plug in or take out the TF card
without permission!
To keep the device from damage,
please use the following delivery services
if forwarding is needed:
SF Express
Deppon Express
KYE
2
Security Warning
Do not touch the high speed running LED
blades while operatin g.
Please fix the device properly
on
solid walls or
fixtures to avoid the security risks of falling
down
caused by vibration while operating.
Make sure that the device without cover is fixed
at a safe distance to protect people from
touching.
Attention:
Please read this instruction manual very
carefully before using the devices. The users
undertake all the personal injuries or proper ty losses
caused by not following this instruction manual
when
operating the devices.
Nanjing DseeLab Digital Technology Ltd.
reserves the right to revise and explain this
instruction manual. This instruction manual may be
revised without further notice.
01
02
03
3
Device Size
Device Parameter List
65cm
Number of Blades
Number of LEDs per Blade
Display Resolution
Display Area
Light Intensity
Device Thickness
Device Weight
Input Voltage
Power Rating（MAX）
Device Rotational Speed
4
720
720*720
0.283m
2
1200cd/m
50mm
600g
24V
48W
700RPM
Communication Method 2.4G WiFi 802.11b/ g/n
Memory Spa ce
Supported Format
Whether Supporting
Wireless Mirroring
Whether Supporting
Screen Union
Screen Union Cable
8G
Picture：jpg, jpeg, png, gif Video：mp4,
avi, rmvb, mkv, wmv, mov, flv
Optional
Yes
Audio line
Theoretical
Maximum Number
of Screen Union
Recommended Number of
Screen Union
≤100 ∞
4
Device Checklist
Item
Quantity
Holographic Intelligent Display
Dsee-65H
Power Adapter
1
1
Remote Control
Wall Hanging Fastener
1
1
Wall Hanging Fixing Expansion Screws
Warranty Card
2
1
Certificate
1
User Manual
1
5
Product Overview
Holographic Intelligent Display Dsee-65H is a kind
of display device that uses the persistence of vision
technology (POV) with a blade of high-density LEDs
spinning at high speed to form tridimensional images.
This kind of device has characteristics such as low
power
consumption, high v isual attractiveness, portability, high
cost performance
and
etc. Meanwhile, the device can be
controlled
and managed
through remote control,
APP
(iOS, Android),
PC
software
and
cloud platform. The device
supports a variety of picture
and
video formats to satisfy
the need to present at different application situations.
6
PAIR Indicator: Indicate modes and operations.
PAIR Button：Switch between the master and slave mode, pair
the remote control.
AP/STA Button：Press the AP/STA button for 2 seconds to reset
the device to normal
mode
(AP mode, the device itself provides
WiFi hotspot).
AP/STA Ind icator：Indicate WiFi mode of the device. Normal mode
(AP
mode)
or network mode (STA mode).
Screen Union Input/Output Interface: In use when the device is
displaying with screen union.
Power Interface: Plug in the power adapter for the electrical
power supply.
1
2 3 4 5 6 7
Back Interface Instructions
7
Indicator Light
Instructions
PAIR Indicator Light
Indicator Light Color
Instructions
Constantly Red
Master mode, motor st ops
Constantly Pink
Master mode, motor
starts
Light Off
Slave mode, motor sto ps
Constantly Blue
Slave mode, motor
starts
Blue Flickers
Pairing the remote control
AP/STA Indicator Light
Indicator Light Color
Instructions
Green Flickers
Constantly Green
Blue Flickers
The device is starting
The devi ce
is
in normal mode
(AP mode).
Connecting to the network.Device
is in network mode(STA mode).
Constantly Blue
Connected to the router. Device
is
in network mode(STA mode).
Red Flickers
Error in connection.
8
Run
RUN
STOP
Stop
Previous
1
Next
Start Over
25% 50 % 100%
Brightness
Adjustment Area
Run：
Stop：
Start the device and switch from standby
mode
to running mode.
Stop the device and switch from running
mode
to standby state.
Previous：
Switch to display the previous video in the
playlist.
Next：
Switch to display the next video in the playlist.
Start Over：
Start displaying the first video in the
playlist.
Brightness : Adjust the brightness of the device.
Remote Control Instructions
1 2 3 3
4
5
6 4 5 6 1 2
9
Power Supply Connection
Take out the battery adapter, plug it in the power
interface for electrical power supply. The indicator LEDs
behind the device will blink and off, and the PAIR
indicator will be red constantly after a short time.
Operation Steps
Remote Control Pairing
When
device is in stand-by status, push the PAIR
button on the backside, indicator light turns red to blue,
2
point remote control to device and long press
100%
button in brightness control area, blue light flashes and
turns red, pairing successful.
3
Start and Stop the Device
Point remote control to device, press Run, device
starts to totate and image turns up, the back indicator
turns pink and opens successfully.
Point remote cintrol to the running device, press
STOP, the internal rotation of device turns slow to stop,
the back indic ator turns red,, close successfully.
1
10
Screen Union of Multiple Devices
The display machine can switch two modes, host
mode
and slave mode.
5
Host
mode
is a content display for a single machine
, from the display of machine
mode
The display machine needs to be connected to the
display machine of host mode,
all
the areas
will
come
Show the content.The default display
is
in host
mode.Slave mode display machine
You can't display the content alone, and you can't
control it with a remote control.
1. Master/Slave Mode Switch
When
the display machine
is
in standby mode, press
and hold the PAIR button on the back.
PAIR indicator lights change from red to extinguished,
indicating that the
mode
is switched to slave
Mode;When the display machine
is
in slave mode,
long press the PAIR b utton
until
2. Device Connection
When
using multiple machines to display content, the
machine is connected as follows:
Display machine 1 (set to host mode) "online output
interface" connection
To display machine 2 (set to slave mode) "on-line input
interface", display
The "on-line output interface" of machine 2 (set to slave
mode) is connected to the display machine
Video Control
Aim the remote control at the display machine and
4 One material, play the next content;
press the ">>" button to switch back
Aim the remote control at the display and press the
"<<" button to switch forward
One material, play the last one.
11
Four Devices’ Connection Illustration
Playlist Control
Display machine playback content Settings,
playback
mode
Settings and playback th
For sequential operation, you need to use the
computer Settings and installation that can connect to
the wireless networkSoftware PC software, use
software to set the operation.
WiFi Mode Reset
Press the AP/STA button for a while will switch the
6
the AP/STA indicator will change from blue to green, and
device from network mode to normal mode. When success,
the WiFi provided by the device can be found on cell
phones and computers at the same time.
7
12
The Dsee-50s supports wall hanging and
bracket installation, with the following only
The method of wall hanging installation is
introduced. For vertical mounting of bracket,
please consult dealers.
1
W
all Hanging Fastener I
nstallation Illustration
Install the Fastener
Wall mounting fasteners are fixed directly to the wall using
expansion screws or ordinary screws
On,
make
sure the sheet metal parts are installed firmly to
prevent vibration
when
the equipment is rotating
Movement causes equipment to
fall
and become dangerous.
2
Fixing structure behind the
machine. Insert the
bottom
into
the wall hangingfixtur,
simultaneously. Screw the
M5
sheet metal parts as
shown
in
the figure. Set the screws
and
complete the installation.
M5
metal sheet parts
fixing screw
Installation Instructions
Dsee.Lab Cloud Platform
This device s upports remote control a nd management
through the Dsee.Lab cloud platform. The cloud platform
website address
is:
cloud.dseelab.com
Before connecting to the cloud platform, the device's WiFi
mode
should be swi tched to networ k mode(STA mode)
manually. Det ailed ope ration steps of switching to the
network
mode
and switching back to the normal
mode
can be
referred to the part about connection
mode
switch on Page 16.
Mobile Software Instructions
15
2
WiFi Connection
1.
Device is in normal mode
1
Keep the smartphone connect to the device WiFi,
type in the corresponding passwords.
2
Click
off
to
osntart or
stop the
device.
2. Device is in net work mode
1
Keep the smartphone connect to
the router which the device
connect to.
2
Click to search for devices
which are connected to the
network. Choose the device on
the list, type in the
corresponding passwords and
turn to
home
page after
connecting successfully.
xxxx.mp4
Numb
3
C
lick
off
toosn
tart
displa
or stop the device.
xxxx.mp4
Operation Steps
1
Download Software
Log in to http://www.dseelab.com and download
the software.
Number of
displaying: 1
er of
ying:4
Playlist
off on
Device is not connected
16
3
WiFi Mode Switch
1. Switch from normal mode to network mode.
1
Click to start the WiFi
mode
switch, type in
the WiFi SSID and password of the router.
2
Click on the switch button.
3
If the device connects to the network successfully, then
the AP/STA indicator at the back of the device turns blue.
If the connection is failed, then the red light blinks.
2. Switch from network mode to normal mode.
1
Click to start the WiFi
mode
switch, click the
button to switch to normal mode.
2
When
the switch is successful, the device WiFi
can be found by smartphone or PC again.
Video or Picture Upload
Click button ， and
click to choose videos
or pictures,
name
the
4
chosen file and confirm
to finish the upload.
Playlist
xxxx.mp4
Number of
displaying:1
是 displaying:4 Number of
xxxx.mp4
off on
The Playlist is Updated
17
the
Clear the Playlist
button to clear the
Click button,
playlist.
xxxx.mp4
Number of
displaying:1
Number of
displaying:4
Playlist
off on
The Playlist is Updated
6
to delete this file.
Delete
Swipe
left
on
the
chosen
video in the playlist,
and
click
xxxx.mp4
Number of
displaying:4
Number of
displaying:10
xxxx.mp4
displaying:6
.mp4
Number o f
Number of
displaying:1
xxxx.mp4
7
to play or pause
Play/Pause
Swipe
left
on
the
chosen
file in the playlist, Click
video.
xxxx.mp4
Number of
displaying:10
displaying:6
.mp4
Number o f
Number of
displaying:4
xxxx.mp4
Number of
displaying:1
xxxx.mp4
18
.mp4
Number of
Video Name： xxxx.mp4
Number of
displaying
：
Cancel Confirm
Set Number of Loops of Video Playback
Swipe left on the chosen video in the playlist, and
click to enter the dialogue box to edit the number of
loops of video playback.(Note: 0 means play this video
indefinitely)
xxxx.mp4
8
upward or downward to
Adjust the Playlist Order
Long press on the
chosen video, drag it
the corresponding
position to adjust the
order of the playlist.
Number of
displaying:10
xxxx.mp4
Number of
displaying:4
xxxx.mp4
Number of
displaying:1
Number of
displaying:4
xxxx.mp4
xxxx.mp4
xxxx.mp4
displaying:6
Number of
displaying:10
Number of
displaying:4
xxxx.mp4
Number of
displaying:1
9
1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
.
Loading...