DSE DSE9473, DSE9483 Installation Instructions Manual

designed to be mounted
the base to a vertical surface with the terminal strips at the bottom.
: This document is intended as a ‘quick start’ guide only. For full
operating instructions and specifications, refer to DSE publication:
DEEP SEA ELECTRONICS
Installation Instructions
473 & DSE9483
designed to be mounted within a
mounting holes. The DSE9473 & DSE9483
be permanently connected to the supply
and the load, with no requirement to disable the charger during times of heavy
load (such as engine cranking) or when in parallel with a charging alternator.
to suit Lead Acid batteries and may be
ordered to suit other battery types. Additionally, configuration is possible using the
to suit other battery types.
be taken to ensure the batteries connected to the charg
feature LED indicato
DSE9473 & DSE9483
DANGER OF DEATH: LIVE PARTS exist within the DSE9
enclosures. The enclosure cover must not be removed.
INSTALLATION
The DSE9473 & DSE9483 battery chargers are control panel, utilising the integral battery chargers are fit-and-forget. It may
BATTERY SUITABILITY
The chargers are factory set by DSE
053-185
ISSUE 1
DSE Configuraiton Suite PC Software Care must correct ‘technology’ to suit the setting of the charger.
INDICATIONS
The DSE9473 & DSE9483 Battery Chargers battery charger status.
DIMENSIONS AND MOUNTING
Case Dimensions 205 mm x 135 mm x 80 mm
(8.0 ” x 5.3 ” x 3.1 ”) Mounting Holes Dimensions Mounting Hole Spacings 190 mm x 120 mm
NOTE: The DSE9473 & DSE9483 chargers are
057-085 DSE9xxx Operator Manual.
Suitable for M4
(0.2 ” diameter)
(7.5 ” x 4.7 ”)
er are of the
rs to show the
with
TYPICAL CONNECTION DIAGRAM
230 V AC Input
110 V AC Input
230 V AC Input
110 V AC Input
Connection Type Screw terminal, rising clamp, no internal spring Min Cable Size (AC Supply) 2.0 mm² (AWG 15) Min Cable Size (Charge Output) 1.0 mm² (AWG 18) Min Cable Size (All Other Connections) 0.5 mm² (AWG 20) Max Cable Size (AC Supply) 3.3 mm² (AWG 12) Max Cable Size (All Other Connections) 2.5 mm² (AWG 14) Recommended AC Fuse DSE9473 3.5 A anti-surge 6.3 A anti-surge Recommended AC Fuse DSE9483 2.0 A anti-surge 3.5 A anti-surge
Deep Sea Electronics Plc.
Email: sales@deepseaplc.com
Web: www.deepseaplc.com
Tel: +44 (0)1723 890099
Fax: +44 (0)1723 893303
Deep Sea Electronics Inc.
Phone: +1 (815) 316-8706
Fax: +1 (815) 316- 8708
Email: sales@deepseausa.com
Web: www.deepseausa.com
Loading...