DSE 4520MKII User Manual

DSEGenset

®

DSE4520 MKII

AUTO MAINS FAILURE CONTROL MODULE

KEY FEATURES

• Load unbalanced alarm

• Congurable for use as an auto

start and AMF control module

• J1939-75 support and CAN alarm

ignore functon

• Alternator frequency & CAN speed

sensing in one variant

• Largest back-lit icon display in its

class

• Heated display option

• Real time clock provides accurate

event logging

• Fully congurable via the fascia or

PC using USB communication

• Extremely ecient power save

mode

• 3 phase generator sensing

• 3 phase mains (utility) sensing

• Compatible with 600 V ph to ph

nominal systems

• Generator/load power monitoring

(kW, kV A, kV Ar, pf)

• Accumulated power monitoring

(kW h, kVA h, kVAr h)

• Generator overload protection (kW)

• Generator/load current monitoring

and protection

• Fuel and start outputs (congurable

when using CAN)

• 4 congurable DC outputs

• 3 congurable analogue/digital

inputs

• 4 congurable digital inputs

• Congurable staged loading

outputs

• 3 engine maintenance alarms

• Engine speed protection

• Engine hours counter

• Engine pre-heat

• Engine run-time scheduler

• Engine idle control for starting &

stopping

• Tier 4 engine instrumentation

screens

• Battery voltage monitoring

• Start on low battery voltage

• Congurable remote start input

• 1 alternative conguration

• Comprehensive warning, electrical

trip or shutdown protection upon
fault condition

• LCD alarm indication

• Event log (50)

• Fuel solenoid pulling circuit

• On-screen line diagram on/o

functionality

• Congurable CAN instrumentation

(10)

• Water in fuel digital input

• Tank bund alarm digital input

• Generator at rest output

• ECU periodic wake-up for

information retrieval

• Back-light power-save mode

• Adjustable delay crank timer

• Pre/post heat functionality

• Overload protection

• Mains/generator A/C system

selection

• Output timer for external audible

alarm

KEY BENEFITS

• Automatically transfers between

mains (utility) and generator

• Hours counter provides accurate

information for monitoring and
maintenance periods

• User-friendly set-up and button

layout for ease of use

• Multiple parameters are monitored

simultaneously which are clearly
displayed on the large back-lit
icon display.

• The module can be congured to

suit a wide range of applications

• Uses DSE Conguration

Suite PC Software for simplied
conguration

• Compatible with a wide range of

CAN engines including Tier 4

• Licence-free PC software

• IP65 rating (with optional gasket)

oers increased resistance to water
ingress

SPECIFICATIONS

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.

MAXIMUM OPERATING CURRENT

85 mA at 12 V, 96 mA at 24 V

MAXIMUM STANDBY CURRENT

51 mA at 12 V, 47 mA at 24 V

MAXIMUM SLEEP CURRENT

35 mA at 12 V, 32 mA at 24 V

MAXIMUM DEEP SLEEP CURRENT

<10 uA at 12 V, <10 uA at 24 V

MAINS (UTILITY)

VOLTAGE RANGE

15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

OUTPUTS

OUTPUT A (FUEL)

10 A short term, 5 A continuous,
at supply voltage

OUTPUT B (START)

10 A short term, 5 A continuous,
at supply voltage

AUXILIARY OUTPUTS C, D, E & F

2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE

15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

DIMENSIONS

OVERALL

140 mm x 113 mm x 43 mm

5.5’’ x 4.4” x 1.7”

PANEL CUT-OUT

118 mm x 92 mm

4.6’’ x 3.6”

MAXIMUM PANEL THICKNESS

8 mm

0.3”

STORAGE TEMPERATURE RANGE

-40 °C to +85 °C

-40 °F to +185 °F

OPERATING TEMPERATURE RANGE

-30 °C to +70 °C

-22 °F to +158 °F

OPTIONAL PARTS

PART PART NUMBER

IP65 Gasket 020-282

RELATED MATERIALS

TITLE PART NO.

DSE4510/20 MKII Installation Instructions 053-190
DSE4510/20 MKII Operator Manual 057-260
DSE4510/20 MKII Conguration Suite PC Manual 057-258

DEEP SEA ELECTRONICS LTD UK

Higheld House, Hunmanby Industrial Estate, Hunmanby YO14 0PH

TELEPHONE [phone]
EMAIL [e-mail] WEBSITE www.deepseaelectronics.com

Deep Sea Electronics Ltd maintains a policy of continuous development and reserves the right to change
the details shown on this data sheet without prior notice. The contents are intended for guidance only.

DEEP SEA ELECTRONICS INC USA

3230 Williams Avenue, Rockford, IL 61101-2668 USA

TELEPHONE [phone] FACSIMILE [phone]
EMAIL [e-mail] WEBSITE www.deepseaelectronics.com

Registered in England & Wales No.01319649
VAT No.316923457

055-207/11/22 (4)

DSEGenset

®

DSE4520 MKII

AUTO MAINS FAILURE CONTROL MODULE

The DSE4520 MKII Auto Mains (Utility)
Failure Control Module is suitable
for a wide variety of single gen-set
applications.

Whilst maintaining functions included
within higher end controllers, such as
generator and load power monitoring,
the DSE4520 MKII provides the user
with an outstanding size to feature
ratio.

Monitoring engine speed, oil pressure,
coolant temperature, frequency,
voltage, current, power and fuel level,
the modules will give comprehensive
engine and alternator protection. This
will be indicated on the largest back-lit
LCD icon display in its class via an
array of warning, electrical trip and
shutdown alarms.

The module provides electronic J1939
(CAN) and non-electronic (alternator
frequency sensing) engine support for
diesel, gas and petrol engines all in
one variant. With a number of exible
inputs, outputs and protections, the
module can be easily adapted to suit
a wide range of applications.

Through USB communication the
module can be easily congured
using the DSE Conguration Suite PC
Software or can be fully congured
through the module’s front panel
editor.

All DSE products are supported by
our dedicated technical support team,
which gives customers and end users
access to 24 hour help and advice.

AVAILABLE VARIANTS

*

4520-05 Auto Mains Failure (Rtc)

ENVIRONMENTAL TESTING STANDARDS

ELECTRO-MAGNETIC COMPATIBILITY

BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment

ELECTRICAL SAFETY

BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment

TEMPERATURE

BS EN 60068-2-1
Ab/Ae Cold Test -30 ºC
BS EN 60068-2-2
Bb/Be Dry Heat +70 ºC

VIBRATION

BS EN 60068-2-6
Ten sweeps in each of three major axes
5 Hz to 8 Hz at +/-7.5 mm,
8 Hz to 500 Hz at 2 gn

HUMIDITY

BS EN 60068-2-30
Db Damp Heat Cyclic 20/55 ºC
at 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40 ºC
at 93% RH 48 Hours

SHOCK

BS EN 60068-2-27
Three shocks in each of three major axes
15 gn in 11 mS

DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES

BS EN 60529
IP65 - Front of module when installed into the
control panel with the optional sealing gasket.

COMPREHENSIVE FEATURE LIST TO SUIT A
WIDE VARIETY OF GEN-SET APPLICATIONS

PC

4 4 3

USB
PORT

CONFIGURABLE
INPUTS

DC OUTPUTS ANALOGUE

DSE4520 MKII

7

OTHER

MAINS (UTILITY)
SENSING

VOLTS VOLTS

1ph
2ph
3ph
N

DC OUTPUT

LOAD CURRENT

+ +

1 1

1ph
2ph
3ph

DC OUTPUTGENERATOR/

GENERATOR
SENSING

SENDERS

+

CHARGE
ALTERNATOR

D +
W/ L

1ph
2ph
3ph
N

DC POWER
SUPPLY 8-35V

FUEL & START
OUTPUTS

(Flexible with CAN)

+

DEUTZ
ISUZU
PERKINS
CATERPILLAR
MTU
VOLVO
CUMMINS
SCANIA

ELECTRONIC
ENGINE CAN