SpeakerTimer
=
Keeps time at lectures, forums
and legal proceedings
=
Maintains schedule and pace of
programs
=
Builds confidence that no one’s
time is unfairly curtailed
=
Spares moderators the need
to interrupt
=
Helps speakers end smoothly
www.dsan.com/Brochures/LimitimerBrochure.EN.pdf
Functions
PRO-2000
Set programs
Four programs can retain TotalTime, Sum-Up Time, Time
Remaining, beep and blink settings. Program 4 (Session)
can run in background.
Set program options
·
Beep : Audible cues are sounded on light changes
·
Blink : Red light begins to blink 30 seconds after it
comes on
·
Beep-Blink : Audible cue sound intermittantly while
red light blinks
Set global options
·
Count-up / Count-down
·
Stop clock on 0:00 or continue counting past TotalTime
·
Count minutes : seconds or hours : minutes
·
Allow time changes while clock is running or lock settings
keys on Start
·
Select type of audible cues : ring, buzz or chime
·
Sound audio cue on signal light only or on signal light and
time console
on
1 2 3 4 5 6 7 8 9 10
on
1 2 3 4 5 6 7 8 9 10
AV-2000
Connect two Limitimer timer consoles to one or more signal
lights; Both timers allow start/stop control
Connect remote signal lights
Interconnect one or more signal lights on a single Cat-5 or
XLR cable or via an RF link.
Remote Signal Lights
Podium signal lights Audience signal lights
Configure control
PSL20V
3.6” (W) x 3.2” (L) x 2.2” (H).
Select sounds, display time remaining
clock, phase lights or both; disable top
lights for timing privacy; daisy-chain
multiple signal lights on a Cat-5 or XLR
cable; each can be set to receive output
from one, all or any combination of
programs.
ASL4ND3 ASL2ND3
High quality 7-segment LED
digits (4” or 2” high). Displays
time remaining, or when
Limitimer console is turned off,
the current time of
day (with battery
backup). Stage
stand and wallmounting clips..
Video Time Display
Video Clock
Display time remaining and signal lights on large
format video screens. VC-2000 is a Cat5—USB
dongle that passes data from Limitimer to PChosted companion software. The software
configures the display with user-controlled size,
color, background, position and transparency. The
output may be displayed alone or on top of other
applications such as PowerPoint©. Video Clock
objects may be enabled or disabled, made
transparent, translucent and sized for various
effects. Custom bitmaps can be created and
configurations saved for quick launch.
D’San Corporation
142 Mineola Ave, Roslyn Heights, NY 11577
Custom Signal Lights
PSL-20VF
Flush mount signal light (4” x
2.5”) for installation into
podiums or dais of conference
rooms and legislative
chambers.
Tel: 516 625-5608
Fax: 516 625-0878
May be
incorporated into
control panels with
other components.
www.dsan.com
info@dsan.com
Wireless connections to the remote signal lights
D'San offers two wireless technologies for connecting Limitimer signal lights to a timer: One is based on a
Bluetooth© protocol the other on low-power 433 MHz transmitter-receiver devices. Both provide about the
same range (200-300 feet). And both are configured so that the receiver unit can be optimally placed and
draw local AC power.Multiple signal lights can connect via Cat5 cable to the receiver.
One to many
PRO-2000RF
Select this option only if no other Limitimers or DSan cue
lights are being used in proximity.The receiver is locally
powered and may drive up to 4 signal lights. Multiple
receivers may be used to control signal lights in different
locations within a radius of about 200-feet from one timer.
Transmitter operates on 433MHz.
One to one
PRO-2000BT
Select this option when using DSan cue lights or other
wireless Limitimer systems in proximity. The transmitter and
receiver will lock onto one another and provide secure and
interference-free communication via Bluetooth protocol. The
receiver is locally powered and may drive up to 4 signal
lights. Any number of transmitter-receiver pairs can be used
in proximity.
A second (slave) timer may be connected to the Bluetooth
receiver. Both timers may start/stop clock and set times.
Touch Panel Control
A Cat-5 to DB-9 adapter that passes serial data as
ASCII control codes between Limitimer and popular
touch panel central conrollers. Touch panel can
access all timer functions including setting times,
starting and stopping clock, beep and blink.
D’San Corporation
142 Mineola Ave, Roslyn Heights, NY 11577
Network communications
IP-2000XTP-2000X
A serial-to-Ethernet adapter that can be configured as
either a server or cllient. Allows Limitimer to drive
remote signal lights or a remote slave timer over the
Internet or within a local area network (LAN). The
adapter’s IP address can be configured via USB
connection to a PC application to enable
use between different networks.
Tel: 516 625-5608
Fax: 516 625-0878
www.dsan.com
info@dsan.com
Accessories
PRO-200RF
CS-518
Shipping/carrying case for Limitimer PRO 2000
CS-827
Shipping/carrying case for Limitimer PRO 2000 and
audience signal light (ASL4-ND3)
KES 882
Adapter Male XLR-to-RJ45 (Cat 5)
RFR-2000
Extra wireless receiver for Limitimer PRO-2000RF
WP-1, 2, 3
External power supply (110 or 220 volt)
wigth plug for USA, UK or Europe
Local Sales Representative
How to purchase Limitimer
Limitimer PR0-2000 is sold as a system consisting of a timer console, remote signal light (PSL20V), 50-foot Cat-5
cable, and external power supply (110 or 220V). Model AV-2000 is a low-profile version that has the same timing
features, but does not contain an on-board XLR jack and is not compatible with older Limitimer signal lights.,
D’San Corporation
142 Mineola Ave, Roslyn Heights, NY 11577
Tel: 516 625-5608
Fax: 516 625-0878
www.dsan.com
info@dsan.com
Loading...