DSan PerfectCue Micro Users Guide

Page 1
PerfectCue Micro®
Remote Presentation Controller
Introduction
PerfectCue Micro is a compact receiver and USB device used to remotely control presentation apps such as PowerPoint® computer “sees” PC-Micro as a standard Human Interface Device (HID). Hence, no special drivers are needed for communication. The actual keystrokes delivered are stored in the receiver. If necessary, they can be changed using a free programming app.* By default, the keystrokes are “right arrow,” “left arrow” and “b.” These correspond to the green, red and yellow LEDs or the “Forward,” “Back” and “Screen Blank**” buttons on the transmitter. *Download at www.dsan.com/PerfectCue. **Button may not be available with supplied transmitter.
with a hand-held transmitter. The connected
Transmitters
USB Port A
(Configure
thru this port)
PerfectCue Micro is programmable!
Visit www.dsan.com/PerfectCue
to download programmer application.
Channel Setting
Match with transmitter*
USB Port B
SUPPLIED: POWER:
*Default transmitter. Other models available:
PC-AS2*
2 “coin”cells* CR2032 1 ”barrel cell” CR123A
(Laser models only)
Service and Support
DSan Corporation
Roslyn Heights, NY 11577
Tel: 516 625-5608 Fax: 516 625-0878
sales@dsan.com
Products and accessories available for
purchase online:
www.dsan.com/shop
PerfectCue user guides, bulletins,
@
configuration app, Q&As:
www.dsan.com/PerfectCue
Coin batteries power the transmitter long after laser battery is exhausted.
COMMUNICATIONS CHANNELS
Allow multiple transmitter-
*
cue light pairs to operate in proximity.
Open the transmitter cover by removing bottom screw.
*Set DIP switches to match those on cue light.
Warranty
Instruments made by DSan Corporation are warranteed against defects in materials and workmanship for one year from date of shipment. Any instrument which fails will be restored free of charge.
Made in USA
Loading...