Accessing Parameter Functions:
ECG MONITORING
To Display All Monitored Leads
- Highlight HR parameter box, click.
- Select Show All Leads, click.
HINT: For best results choose waveforms that are all
positive or all negative and greater than 0.25 mv tall.
To Change Displayed Leads
- Highlight HR parameter box, click.
- Highlight Lead Setup, click.
- Highlight Channel 1, click.
- Highlight desired lead, click.
- Repeat above to change other channels.
To Activate Pacemaker Detection
- Highlight HR parameter box, click.
- Highlight ECG Options, click.
- Highlight Pacer Detection On, click.
NOTE: Pacer Detection is not active when
Electrosurgical Unit (ESU) filter suppression is used.
Infinity Delta/Delta XL/Kappa - Quick Reference Guide
Intended for quick reference only.
Refer to Instruction For Use Manual.
INFINITY DELTA/DELTA XL/KAPPA - QUICK REFERENCE GUIDE | 09
© 2010 Draeger Medical, Inc.