Dryve Designs Dryve 2600 User Manual

The DRYVE 2600 Power Bank has a unique LED
display to indicate the battery cells state of
charge. The device contains grade A battery cells
with an auto wake up function. The AC and DC
functions can work at the same time.

Use the Micro charging cable (supplied) to
connect your Dryve Power Bank to a computers
USB input or a 5V power adapter to charge the
Power Banks battery cells.

The LED display will indicate the Power Banks
battery level as it discharges while powering up
your chosen device.

Once the bank reaches 0... it will stop output.

The LED State of Charge Indicator will display the
battery level as the Power Bank is charged. Once
the battery cells reach 100%, the LED will turn off

Your Dryve 2600 Power Bank has the stored power
to charge any of your USB compatible devices.

We suggest fully charging and discharging your
device monthly to extend battery life.

(5V1A)

Micro USB Input Port

connect to recharge the

Power Bank

(5V1A)
USB Output Port

connect to your device
using supplied cord or
your device OEM cord

Function Button

State of Charge LED Indicator

The Dryve 2600 is designed to charge devices with a
voltage output range between 5.3 - 0.5 v.
Charging devices outside this range may decrease the
life of your Power Banks battery capacity.

user manual

Capacity/ 2600mAh
Battery Type/ Li-ion
Input/ DC5V 1A
Output/ DC5V 1A
Holding Time/ 5000h
Enclosure Material/ ABS+ Aluminum
Working Temp./ -45C - +45C

s p e c i fi c a t i o n s

P o w e r P r o t e c t i o n