Dry Air MAX Force, VAF Series Ventilation Manual

MAX Force

Ventilation Manual

313 North Oak Street • Burlington, WA 98233 • USA

Tel: [phone] • Fax: [phone]

Toll Free U.S. & Canada: 1-888-755-9176

[e-mail]

• www.dryairtech.com

Congratulations on your purchase of a new VAF series fan by Dry Air Technology, Inc. This Vane
Axial Fan has been designed to offer you the reliability, durability and portability you need for the
toughest job.

Each of our units is carefully engineered to meet the needs of your industry whether it is industrial,
marine, restoration, rental or balloon. Our products are designed specifically for your application to
ensure the highest level of performance. All of us at Dry Air Technology value our clients and
uphold our mission to provide you with the best customer service possible. Please read this
owner’s manual carefully to ensure that you get the most from your unit.

SAFETY INFORMATION
CAUTION!

Unit operates on alternating current: 110/120 volt, 60 HZ
Do not operate your VAF series fan with a cut or frayed power cord. Do not unplug your unit by

pulling on its cord. Grasp the plug firmly and pull it out of the wall socket or power receptacle. The
plug has a safety ground pin installed that must not be removed. If the pin is damaged or missing,
have the power cord replaced at once. Visually inspect the power cord before each use. Ignoring
these safety precautions may result in a fire or an electric shock.

Never operate electrical equipment in standing water. There is a shock hazard.
Never drop the unit. Sudden and severe impact may result in damage to internal components.
Your VAF fan should never be operated with the safety grills removed. Personal injury may result.
Drop cloths or other loose fabrics can be drawn against the unit thereby restricting airflow. This

condition may cause the unit to overheat. Keep the air inlet clear of any obstructions.
Save the shipping carton in case your VAF fan must be returned for repair.
This unit should never be serviced or cleaned while it is plugged into a live electrical power source.

WARNING: Ignoring these safety precautions may result in serious personal injury.

Vane Axial Fan

MAX FORCE

OPERATING INSTRUCTIONS
The unit as packaged is ready to be put into service. If you have a 220V model, attach the

appropriate plug for your region.
Inspect the unit completely for any shipping damage. Place the unit on the ground or on a very

stable platform.
Plug the unit into a grounded alternating current circuit and switch the unit on.

MAINTENANCE
Warning

Disconnect the unit from the power supply before cleaning or servicing.
Before each use the unit should be inspected for damage, clogged inlet or outlet, or any excess

buildup of foreign material. When the unit is first turned on, check for excessive vibration, which
could indicate a major problem. If the unit vibrates, have a service technician inspect the unit for
the problem.

SPECIFICATIONS FOR MAX FORCE

VOLTAGE 110/120V
FREQUENCY 60 HZ
MOTOR 1 HP
CURRENT 8.6 AMPS
RPM 3450
CFM 4000
HEIGHT 22”
WIDTH 21”
LENGTH 15 ½”
WEIGHT 39 lbs*

*Weight does not include stand.