Dry 4 Life DRYSIGNAL operation instruction

USING THE DRY4LIFE BEDWETTING ALARM

SET UP:

1) Insert 1 size C battery into the alarm clock.

2) Press and release the silver button on top of the alarm. It will ring to
indicate it is functional.

3) Leave the button in the downright position until ready for bedtime. It is
now deactivated. (The clock will continue to tell time, but the wake up
alarm is permanently disabled to prevent confusion.)

PREP ARATION FOR BED :

1) Cut a slit in a common, disposable, self-adhesive panty shield.

2) Insert the wet-sensor into the panty shield, the metal side facing the
body.

3) Peel and stick the panty shield containing the wet sensor to the inside
of close fitting underwear. (As close to the source of urine as possible.)

4) Release the alarm button. It will ring indicating the unit is ready to
receive signals from the transmitter when the user wets.

WHEN THE ALARM GOES OFF:

1) Depress the button. The alarm will stop sounding.

2) Clean the wet-sensor with soap and water.