Drummond submersible User Manual

Visit our website at: http://www.harborfreight.com

Email our technical support at: [e-mail]

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 17d

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2017 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

To ol s re q u ir e d f o r a s s e mb l y a n d s e r vi c e m a y n o t b e in c l ud e d .

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 63477

Before start-up, note the following:

The Pump must be connected to a Ground Fault Circuit Interrupter (GFCI) protected receptacle which has
been installed according to regulations. The receptacle must have a supply voltage of 120 VAC at 60 Hz.

CAUTION

This Pump has been evaluated for use with water only.

WARNING

IMPORTANT! For your own safety –
before starting to run the Pump, please have
the following items checked by an expert:

1. Risk of electric shock – This Pump is supplied
with a grounding conductor and grounding-type
attachment plug. To reduce the risk of electric shock,
be certain that it is connected only to a properly
grounded, grounding-type receptacle.

2. Risk of electric shock – This Pump has not been
investigated for use in swimming pool areas.

3. The electrical connections must be
protected from moisture.

4. If there is danger of flooding, the electrical
connections must be taken to higher ground.

5. Circulation of caustic fluids, as well as the circulation
of abrasive materials, must be avoided at all costs.

6. The Pump must be protected from frost.

7. The Pump must be protected from running dry.

8. Access by children should also be
prevented with appropriate measures.

9. To prevent death from electric shock,

Pump must be connected only to a GFCI
protected outlet.

10. Do not use an extension cord with this item.

11. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)

12. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.

13. The warnings, precautions, and instructions
discussed in this instruction manual cannot cover all
possible conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product, but
must be supplied by the operator.

Fluid Type

The Pump is designed for use with water with a maximum temperature of 95° F (35°C).
Do not use the Pump for other fluids, especially not fuels, cleaning fluids, or other chemical products.

Page 3For technical questions, please call 1-888-866-5797.Item 63477

Specifications

Electrical Rating 120 VAC / 60 Hz / 8.5 A
Power Cord Length 25'
Maximum Flow @ 0' Head Lift 4400 GPH
Maximum Head Lift @ 0 GPH Flow 40'
Discharge Port 1-1/4" NPT
Discharge Port Adapter 1-1/4" NPT to 3/4" garden hose thread

Installation

The submersible motor Pump must be installed in a stationary position with either:

a. A fixed pipeline or

b. A flexible hose pipe.

Please note!

1. Do not install the Pump by suspending it
unsupported from its delivery pipe or power cord.
The Pump must be suspended from the handle
or be placed on the bottom of the basin.
To ensure that the Pump works properly, keep the
bottom free from sludge and dirt of all kinds.

2. If the water level sinks too low, any sludge in the
basin will dry out and stop the Pump from starting.
To help ensure the Pump will start as required,
check the Pump regularly with start-up tests.

Power Supply

1. The Pump is equipped with a shock-proof plug
according to regulations. The Pump is designed
to be connected to a 120 VAC, 60 Hz, Ground
Fault Circuit Interrupter (GFCI) protected socket.

2. Make sure that the socket is sufficiently
secured and is in excellent condition.

3. When the plug is inserted into the socket,
the Pump will start operating.

4. WARNING: To prevent death from electric

shock, Pump must be connected only to
a GFCI protected outlet.

WARNING! If the power cord or plug is damaged,

do not use the Pump. The power cord or plug
may only be repaired by a certified electrician.

Areas of use

1. This Pump is designed to pump water only.

2. This Pump is designed to be used for:

• Removing ground water from
basements and outdoor job sites

• Very high flow

3. This Pump should NOT be used for:

• Continuous run, fountain/pond water features

• Basement sump applications

• Septic or sewage systems

• Potable water systems

4. This Pump can also be used to transfer water
(e.g. household, farming, plumbing).