Drive Medical RTL10275 User Manual

exercise peddler
with digital display

ejercitador de pedales
con pantalla digital

pédalier exerciseur
avec afficheur

item # RTL10275

www.drivemedical.com

EU Authorized Representative
Drive Medical LTD
Ainley’s Industrial Estate
Elland, West Yorkshire,
United Kingdom HX5 9JP

www.drivemedical.com

Rev.1.08.26.14

Rev.1.08.26.14

assembly instructions folding

1. Remove contents from box.

2. Pull legs in opposite
direction until locking but­ton “snaps” into locking
receiver (See figure A).

5. The pedal straps have
2 sets of holes to allow you
to adjust the length of the
strap around your foot or
shoe. (See figure C)

automatic operation

battery replacement

If the display does not come on or reads incorrectly, the battery
requires replacement.

To replace the battery, use a small screw driver and remove
the display panel. Turn the display panel over and remove
the watch- style battery. Insert a new battery and replace the
display panel.

Footrest

pad

Swivel sha

Tension knob

Footrest plate

Connecting

Tube

Hinge

Plastic

cover

Digital Display

Tube

Pad

figure A

4. Insert tension knob on top of peddler and turn
clockwise to tighten. The tension knob will increase/
decrease the amount of tension on the peddler.
Tighten/ loosen to a level that feels comfortable.

3. Attach digital display to the
peddler by sliding the loop
over the tension knob recep­tacle located on the top of
the peddler. Push down gently
on the display so the clasp on
the back of the display attach­es to the peddler frame. (See
figure B)

1. MODE (Red Button): This control
allows you to select a particular
function. To start, press and hold
the Red Button for 4 seconds. The
LED will display the different func­tions. (After a few minutes without
any movememnt, the unit will
automatically shut off).

2. To select a function, wait until the
4 second set up is complete. Push
the Red Button and the arrow will move through the func­tions. When the desired function is selected, simply use the
peddler and the unit will calculate the exercise.

3. TIME: Determines the amount of time the peddler has been

operating.

4. COUNTER (CNT): Determines the amount of steps while

operating the peddler.

5. CALORIE (CAL): Determines the amount of calories burned

while using the peddler.

6. REPS PER MINUTE (R.P.M.) Automatically calculates the

repetitions per minute.

7. SCAN: Will automatically review the results of all functions.

Counter 3

Counter 2

figure B

To fold, depress push pin and fold leg inward. Repeat
for second leg. (see figure D)

figure D

figure C