Drive Medical PHOENIXHD320, PHOENIXHD420 Quick Guide
Secure the armrests in place with the provided
star knobs at the desired width.
Set the battery pack onto the scooter directly in
front of the seat post. Lock the battery pack in
place by rotating the dial on the pack to the
locked position.
Remove your scooter from its packaging.
Loosen the tiller adjustment knob, raise the tiller
to the desired angle and retighten the knob.
Attach the front basket by aligning the bracket
on the tiller with the mounting holes on the
basket. Then push down to secure in place.
Fully charge the scooter’s batteries by inserting
the round charger connector into either the
charging terminal on the scooter’s battery pack or
the terminal located on the scooter’s tiller. Then insert
the 3-pronged plug into a standard electrical outlet.
Be sure to charge the scooter for 8-10 hours before
first time use.
Quick Start Guide
Insert the armrests into the attachement points
in the seat frame so that the armrests face
forward.
While lifting up on the seat release lever , place
the seat onto the seat post. Release the lever
and rotate the seat until it locks into place.
Remove the clear plastic insert from the area
where the battery pack connects on the front
shroud.
Please Read Before Operating!
Phoenix HD 3 & 4 Wheel
For technical assistance, call toll free (866) 621-4933 or (800) 544-5155.
1. 2. 3. 4.
5. 6. 7. 8.
Your Phoenix HD Scooter is designed to be easily disassembled into 5 pieces
for convenient transport or storage.
The pieces are:
• Front Section (heaviest piece, 40 lbs.) • Rear Section • Battery Pack
• Seat • Front Basket
To disassemble your scooter:
1. T urn key switch to “OFF.”
2. Engage front wheel lock.
3. Place the freewheel mode lever in the “Drive” position.
4. Pull upward on the swivel-release lever to remove the seat from seat post.
5. Pull up on the battery pack to remove it from the scooter .
6. Pull up on the release lever to separate the front and rear sections.
Phoenix HD Quick Start Guide
READ BEFORE UNPACKING
This Quick Start Guide offers basic information on initial product
setup only. Read the owner’s manual and all supplemental
information thoroughly before operating the product for
information on safety, battery charging, basic operation, comfort
adjustments, disassembly and care and maintenance.
NOTE: The illustrations provided may not reflect your actual unit.
Before use, make sure that the scooter’s
freewheel mode knob is pushed down in the
“drive” position.
READ
THIS
FIRST!
9.
For information on the
comfort adjustments available
on your scooter, please
consult your owner’s manual.
Loading...