Drive 12021KD-1 User Manual

www.drivemedical.com

deluxe bariatric
shower chair
with back

item # 12021KD-1

www.drivemedical.com

EU Authorized Representative
Drive Medical LTD
Ainley’s Industrial Estate
Elland, West Yorkshire,
United Kingdom HX5 9JP

Rev.7.1.26.18

parts diagram/list

Weight capacity 500 lbs (226 Kg)

A B C D

E F

H I

JJ

K

L2

L1

M

M

A- Long Center Screw (1)
B- Flat Head Screw (4)
C- Backrest Screws (4)
D- Cross Brace Screws (9)
E- Washers (6)
F- Nuts (9)
G- U-Clips (6)

H- Seat
I- Backrest
J- Backrest Frame
K- Cross Brace
L- Leg Receivers
M- Legs

1. Remove contents from carton and verify that all
parts in the parts diagram/list are present.

2. Assemble the leg receivers
a. Take the seat (H) and turn it upside-down so that
the screw holes are facing upwards.
b. Take the leg receiver labeled “#1” (L1) and place it
into the groove labeled “#1” in the seat with the leg
receiver holes pointing upwards.
c. Take the leg receiver labeled “#2” (L2) and place
it into the groove labeled “#2” in the seat with the
leg receiver holes pointing upwards.
d. Insert screw (A) into the center screw hole through
both leg receivers but do not fully tighten the screw.
e. Secure Leg Receiver #1 using 2 flat head screws (B).
f. Secure Leg Receiver #2 using 2 flat head screws (B).
g. Tighten the center screw.

A

B B

B

B

3. Assemble the leg cross-brace
a. Take the two leg cross-braces (K) and place one on
top of the other with the grooves properly aligned.

D

KK

G

E

E