Dream Vision 3, Dream Scaler 3 User Manual

2 R699751 - DreamScaler3 User Manual

Changes

DreamVision provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not
limited to the implied warranties or merchantability and fitness for a particular purpose. DreamVision may make
improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time
without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the
information in this publication; these changes are incorporated in new editions of this publication.

Copyright

All right reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be
recorded, transmitted or stored in a retrieval system without the prior written consent of DreamVision.

Guarantee

DreamVision provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of
guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during
transport, as well as for material and manufacturing faults. DreamVision must be informed immediately in writing of
any complaints.

If the purchaser or third party caries out modifications or repairs on goods delivered by DreamVision, or if the goods
are handle incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of
risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will
be rendered invalid. Not included in the guarantee coverage are system failures which are attributed to programs or
special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance
are not subject to the guarantee provided by DreamVision either.

The environmental conditions as well as the servicing and maintenance regulations specified in this manual must
be complied with by the customer.

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of
their respective holders. All brands and product names mentioned in this manual serve as comments or examples
and are not to be understood as advertising for the products of their manufactures.

R699751 - DreamScaler3 User Manual 3

TABLE OF CONTENTS

1.0 GETTING STARTED ................................................................................................................... 5

1.1 Introduction........................................................................................................................ 5

1.2 Document Conventions ..................................................................................................... 5

1.3 Unpacking and Inspection ................................................................................................. 5

1.4 Display Compatibility Requirements.................................................................................. 6

1.5 Installation Guidelines ....................................................................................................... 6

2.0 BASIC OPERATION.................................................................................................................... 8

2.1 Front Panel Overview ........................................................................................................ 8

2.2 Rear Panel Overview......................................................................................................... 8

Video Inputs .......................................................................................................... 8

Video Outputs........................................................................................................ 9

Audio Inputs .......................................................................................................... 9

Audio Outputs........................................................................................................ 9

Power Supply Input ............................................................................................... 9

2.3 Remote Control Overview ............................................................................................... 10

Power/Standby Buttons ....................................................................................... 10

Curtain Button ..................................................................................................... 10

Remote Control Battery Installation .................................................................... 10

Menu Navigation ................................................................................................. 11

Info Screen Button............................................................................................... 11

3.0 SETUP....................................................................................................................................... 12

3.1 Initial Set-Up .................................................................................................................... 12

STEP 1 - Power Up ............................................................................................. 12

STEP 2 - Connect the scaler to your display....................................................... 12

STEP 3 - Connecting your Sources to the DreamScaler3 .................................. 13

3.2 Audio Operation............................................................................................................... 17

4.0 MENU OPTIONS ....................................................................................................................... 18

4.1 Input Select...................................................................................................................... 18

4.2 Input Aspect Ratio Control............................................................................................... 18

Frame Aspect Ratio............................................................................................. 19

Active Aspect Ratio ............................................................................................. 19

DreamScaler3 Image Mapping............................................................................ 19

Panorama............................................................................................................ 20

Zoom ................................................................................................................... 20

Pan ...................................................................................................................... 20

Borders................................................................................................................ 20

Presets ................................................................................................................ 20

Front Panel and On-Screen Displays for IAR...................................................... 21

4.3 Input Adjust Control .........................................................................................................21

Deinterlacing ....................................................................................................... 22

PReP™ ............................................................................................................... 22

Overscan............................................................................................................. 22

Line Offset........................................................................................................... 22

Color Space......................................................................................................... 23

Input Level........................................................................................................... 23

VCR Mode........................................................................................................... 23

HDMI Config........................................................................................................ 23

Auto Input Priority Selection................................................................................ 23

Audio Input .......................................................................................................... 23

AV Lip Sync ......................................................................................................... 24

4.4 Picture Controls ............................................................................................................... 24

Brightness ........................................................................................................... 24

Contrast............................................................................................................... 24

Saturation............................................................................................................ 24

Hue...................................................................................................................... 24

Sharpness ........................................................................................................... 24

Y/C Delay ............................................................................................................ 24

4 R699751 - DreamScaler3 User Manual

Chroma Filter (Auto CUE-C) ............................................................................... 24

4.5 Configuration ................................................................................................................... 25

Test Patterns ....................................................................................................... 25

Auto Standby....................................................................................................... 25

LED Brightness ................................................................................................... 25

User Mode........................................................................................................... 25

Serial Port Rate................................................................................................... 25

Factory Default.................................................................................................... 25

Software Update.................................................................................................. 26

Information ......................................................................................................... 26

4.6 Output Setup ................................................................................................................... 26

Analog/Digital (A/D)............................................................................................. 26

Output Format ..................................................................................................... 27

Output Aspect Ratio Control................................................................................ 27

Sync Type ............................................................................................................ 28

Color Space......................................................................................................... 29

Output Level........................................................................................................ 29

Framerate Conversion......................................................................................... 29

Border Level........................................................................................................ 29

Gamma Correction .............................................................................................. 29

HDCP Mode ........................................................................................................ 29

Display Profiles.................................................................................................... 29

5.0 APPENDIX ................................................................................................................................ 31

5.1 Non-Volatile Memory Settings ......................................................................................... 31

System Settings .................................................................................................. 31

Input / Format Settings........................................................................................ 31

Format settings.................................................................................................... 33

5.2 Setting up an DreamScaler3 Using the Internal Test Patterns ........................................ 33

Determining the Correct Output Resolution for Your Display............................... 33

Initial Setup of the to Your Display: ...................................................................... 34

Display Calibration .............................................................................................. 36

Special Equipment Needed for Display Calibration............................................. 37

CRT Display Calibration ...................................................................................... 37

Source Calibration............................................................................................... 37

5.3 Troubleshooting ............................................................................................................... 38

My DreamScaler3 shows an error message. ...................................................... 38

The picture has horizontal lines with the Output set to 1080p60 (or 720p60)..... 38

The picture is green when I use the analog output of the DreamScaler3. .......... 39

No picture when I connect the DreamScaler3 to the HDMI input of my display. . 39

The Blue status LED blinks on the front panel of the DreamScaler3. ................. 39

The Green status LED blinks on the front panel of the DreamScaler3. .............. 39

Will I lose the settings on my DreamScaler3 if I update the software version..... 39

5.4 Complete Menu Tree ....................................................................................................... 40

1.0 GETTING STARTED

R699751 - DreamScaler3 User Manual 5

1.0 GETTING STARTED

1.1 Introduction

Thank you for purchasing the DreamScaler3 Video processor powered by ABT. This product delivers a level of
quality among the very highest available today.

We are especially pleased to bring you ABT’s new VRS Precision Video Scaling II technology. This technology
enables precision up conversion of standard and high definition (480i/p, 576i/p, 720p, 1080i/p) video sources and
content to the native or optimum resolution of your display, delivering best in-class front-of-screen performance.
Available output resolutions span from VGA up to 1080p, including the standard HDTV resolutions of 720p and
1080i.

In addition to the video scaling technology the DreamScaler3 also offers a host of other innovative features,
including:

•4 HDMI (High Definition Multimedia Interface) inputs and 1 HDMI output

• Analog Input and Output, using BNC-style Connectors

• Flexible Digital and Analog Audio Switching

• Precision Audio/Video Time-Delay Synchronization

• Timebase Correction

• Fully Programmable Framerate Conversion

• Input and Output Aspect Ratio Controls

• Flexible Zoom and Pan Controls

• SDI Input Capability (with SD-SDI Input Module, ref. S7011030)

This User Manual can help you set up your new DreamScaler3, and give you the information required to match it to
your display. It can also show you how to connect it to and use it with the other components in your system.

1.2 Document Conventions

In this Manual, the menu structure is referred to in the following abbreviated form:

Navigating the On Screen Display

For example, to adjust the ‘Brightness’ press the ‘Picture Control’ button and then using the up/down arrow buttons,
highlight ‘Brightness’ and press enter to adjust the setting.

If you were changing this value to 5, the abbreviated instructions would read as follows:

Picture Control

⇒⇒

⇒⇒

Brightness ⇒⇒⇒⇒ 5

1.3 Unpacking and Inspection

Your DreamScaler3 carton should contain the following items:

• DreamScaler3 Video Processor

• Universal 6V@7A AC-to-DC Power Converter

•Power Cord

• Remote Control

1.0 GETTING STARTED

6 R699751 - DreamScaler3 User Manual

• DreamScaler3 User Manual

• Serial Cable for Software Updates and Automation (1:1)

The DreamScaler3 uses BNC-style analog connectors and a HDMI digital connector to provide video output
signals. You must purchase an output cable to connect to one of these outputs to your display. Different displays
have different input connectors, so check your display specifications to ensure compatibility.

Both input and output cables can be supplied by your Authorized DreamVision Reseller. To find your nearest
Authorized DreamVision Reseller, go to www.dreamvision.net.

1.4 Display Compatibility Requirements

DreamScaler3 video processing product is compatible with a wide range of displays. These include digital TVs,
projectors, and flat panel displays, as well as other emerging technologies that can support 480p or higher
resolution video signals.

To determine if your display is compatible with the DreamScaler3, look to see if it has one of the inputs listed below.
If not, then your display is probably limited to receive a standard NTSC, PAL or SECAM interlaced signal and will not
function correctly with the DreamScaler3.

Component video inputs that are not capable of accepting a 480p signal should be labeled ‘480i (NTSC) or ‘576i’
(PAL/SECAM).

The following types of displays should be compatible with the DreamScaler3 since it can support higher resolution
signals:

• Plasma displays

• LCD-based flat panel and front & rear projection displays

• DLP-based front & rear projection displays

• D-ILA™-based front & rear projection displays (SXRD™ included)

•CRT-based Direct View HDTVs and Computer Monitors with front and rear projection displays

1.5 Installation Guidelines

Ta ke special care with the DreamScaler3 installation to ensure optimal performance. Pay particular attention to the
bulleted items that begin below and to other precautions that appear throughout this guide.

Do ...

• Install the DreamScaler3 on a solid, flat, level surface such as a table or shelf. You can also install the
DreamScaler3 in a standard 19” equipment rack using an optional rack-mount kit available from authorized
DreamVision resellers.

• Select a dry, well-ventilated location.

• Use only the included external power supply.

HDMI input

DVI-D input

VGA HD-15 input 5 BNC RGBHV inputs

Digital I

nputs

Analog Inputs

Component Inputs (YCbCr or YPbPr)

or

1.0 GETTING STARTED

R699751 - DreamScaler3 User Manual 7

•Avoid excessive humidity, sudden temperature changes or temperature extremes.

• Use only accessories recommended by the manufacturer to avoid fire, shock or other hazards.

• Unplug your DreamScaler3 before cleaning. Use a damp cloth for cleaning.

Don’t ...

• Install the DreamScaler3 on an unstable surface or one that is unable to support all four of its feet, unless it is
installed in an equipment rack.

• Stack the DreamScaler3 directly above heat-producing equipment such as power amplifiers or other
components that generate heat during use.

• Expose the DreamScaler3 to a high temperatures, humidity, steam, smoke, dampness, or excessive dust. Avoid
installing the DreamScaler3 near radiators and other heat producing appliances.

• Install the DreamScaler3 near unshielded TV or FM antennas, cable TV decoders, and other RF-emitting
devices that might cause interference.

• Place the DreamScaler3 on a thick rug or carpet or cover the DreamScaler3 with cloth. This might prevent
proper cooling.

• Attempt to service this unit. Instead, disconnect it and contact your Authorized DreamVision Reseller.

• Open or remove unit panels or make any adjustments not described in this manual. Attempting to do so could
expose you to dangerous electrical shock or other hazards. It may also cause damage to your DreamScaler3.

• Obstruct the front panel IR receiver window shown in “Remote Control Overview”. Do not attempt to use the
remote control out of line of sight with the IR receiver. Doing so will cause improper operation.

2.0 BASIC OPERATION

8 R699751 - DreamScaler3 User Manual

2.0 BASIC OPERATION

2.1 Front Panel Overview

Status LED - This displays the current state of the DreamScaler3:

• Off: The unit is in standby mode

• Red: No signal detected

• Blue: The unit is processing the signal

• Blinking Blue: There is a problem with HDCP authentification

• Green: The unit detects an unsupported signal

On/Standby - This toggles unit power between On and Standby.

IR sensor - This is where all IR commands are received by the DreamScaler3. Do not obstruct this window.

Front Panel Display (FPD) - This is where all information from the on screen display (OSD) is duplicated to assist in
the setup of your DreamScaler3.

Navigation Keys - These keys are duplicated on the remote control and function exactly the same.

2.2 Rear Panel Overview

Video Inputs

The DreamScaler3 has eleven (11) video inputs and an optional SD-SDI input available. The inputs and the formats
they support are as follows:

• Video 1 (NTSC, PAL, PAL-M and SECAM)

• Video 2 (NTSC, PAL, PAL-M and SECAM)

• S-Video 1 (NTSC, PAL, PAL-M and SECAM)

• S-Video 2 (NTSC, PAL, PAL-M and SECAM)

• Component/RGBS 1 (480i/p@60Hz, 576i/p@50Hz, 720p@50/60Hz, 1080i@50/60Hz)

• Component/RGBS 2 (480i/p@60Hz, 576i/p@50Hz, 720p@50/60Hz, 1080i@50/60Hz)

When navigating the OSD, the FPD always shows the current selection on the bottom line and the menu/
submenu item on the top line. When you change a value of a setting, the value is on the bottom line and the
title of the parameter is on the top line.

Switching Inputs using the Navigation keys – You can switch inputs on the front panel of the DreamScaler3
using the navigation keys (v and ^). To do this, press the Down or Up without pressing the Menu button first.

MENU

EXIT

Front Panel Display (FPD)

Adjustment Bu ttons

Up

On/Standby Left Down Right

Menu Exit

IR sensor

Status LED

HDMI

INPUT

1234

INPUT

OUTPUT

1

324

SERIAL PORT

ANALOG AUDIO INPUT

Y (G) Pb (B) Pr (R) H V

DC In

+6V @5A

Y (G) Pb (B) Pr (R)

1

212

121

2

COMPONENT

LR

ANALOG VIDEO

OUTPUT

I
N
P
U
T
S

I
N
P
U
T

O
U
T
P
U
T

Component 1
(YPbPr or RGB)

Component 2
(YPbPr or RGB)

Power

Composite

Video 1

Composite
Video 2

Digital
Audio Out
(optical)

Digital
Audio Out
(coaxial)

Digital Audio
Inputs 1, 2
(optical)

Digital Audio
Inputs 3, 4
(coaxial)

Serial Port

S-Video 1

S-Video 2Sync 2

Sync 1

Analog Video
Output

HDMI Inputs
1, 2, 3, 4

HDMI Output

Analog Audio
Inputs L, R
(optical)

DIGITAL AUDIOS-VIDEO VIDEOSYNCPOWER

SDI Input

Analog Video
Input

2.0 BASIC OPERATION

R699751 - DreamScaler3 User Manual 9

• RGBHV/Component (480p, 576p, 720p@50/60Hz, 1080i@50/60Hz, VGA/SVGA/XGA/SXGA@60Hz)

• HDMI 1 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)

• HDMI 2 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)

• HDMI 3 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)

• HDMI 4 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)

• SD-SDI (480i@60Hz and 576i@50Hz YCbCr 4:2:2)

Video Outputs

The DreamScaler3 has two video outputs, one analog and one digital.

The analog output on the DreamScaler3 can output the following signal from any resolutions up to 1920 x 1080:

• YPbPr (Component)

• RGBHV

• RGsB

• RGBS

The HDMI output on the DreamScaler3 can output any resolutions up to 1920 x 1080 @ 60Hz:

• RGB 4:4:4 (8-bit)

• YCbCr 4:2:2 (10-bit)

• YCbCr 4:4:4 (8-bit)

To connect the DreamScaler3 to a display that has a DVI input, use either an HDMI-to-DVI cable or an adapter.

Audio Inputs

There are nine (9) audio inputs on the DreamScaler3:

•Two (2) Optical Digital inputs

•Two (2) Coaxial Digital inputs

• One (1) Analog (L/R) input

•Four (4) HDMI inputs

While the digital and analog audio inputs can be assigned to any one of the video inputs, the HDMI audio inputs are
tied directly to the HDMI video signal connected on the same input.

The DreamScaler3 accepts digital audio sourced from DVD players, satellite receivers, digital set top boxes, game
consoles, or other digital audio devices. These inputs are compatible with most consumer digital audio formats,
including CD-Audio (44.1kHz/16 bit LPCM), Dolby Digital, and DTS.

The coaxial digital audio inputs are compatible with any format with a sampling frequency between 24kHz and
192kHz, and with a data word structure up to 24 bits in length. The optical digital audio inputs are compatible with
any format with a sampling frequency between 24kHz and 96kHz and with a data word structure up to 24 bits in
length. The HDMI audio inputs are compatible with HDMI 1.1 audio formats.

Audio Outputs

There are two digital audio outputs, one coaxial and one optical. Both are active at the same time, with the selected
input Digital Audio stream.

Power Supply Input

The DreamScaler3 comes with a 6V@7A AC-to-DC converter power supply, which accepts 100-240 VAC at 50/
60Hz. To attach power to the unit:

1) Attach the removable power cord to the external power supply.

2) Plug the removable power cord into a wall outlet or power conditioner, if applicable.

Note:

The DreamScaler3 is able to process HDCP protected signals. However, the output signal may be only visible if a
valid HDCP supported display is hooked up to the DreamScaler3’s HDMI output connector. The output signal would
never be visible through the DreamScaler3’s analog BNC output connectors.

2.0 BASIC OPERATION

10 R699751 - DreamScaler3 User Manual

3) Plug the small connector attached to the cable that comes out of the power supply into the ‘DC In’ port on the
back of the DreamScaler3. The DreamScaler3 should power on and display ‘DreamVision Powered by ABT’ on the

FPD for a couple of seconds.

2.3 Remote Control Overview

The functions of these buttons are detailed in the next paragraph. An asterisk (*) indicates this feature will be
implemented in future software.

Power/Standby Buttons

The DreamScaler3 remote has a Power and a Standby button. The Power button always turns the DreamScaler3 on
and the Standby button always put the unit into Standby mode.

Curtain Button

The DreamScaler3 remote has a Curtain button which allows you to close a ‘curtain’ over the image. This feature is
especially useful when an image is paused on a display susceptible to burn-in.

Remote Control Battery Installation

The remote control for the DreamScaler3 requires two AA batteries. These should be replaced as needed. ABT
recommends Alkaline batteries because they last longer without leaking.

Use only the power supply that came with your DreamScaler3.

INPUT SELECT

STANDBY

POWER

INPUT

ADJUST

CONFIG

PICTURE

CONTROL

OUTPUT

SETUP

MENU EXIT

16:94:3

AUTO

VIDEO 1S-VIDEO 1COMP 1HDMI 2

VIDEO 2S-VIDEO 2COMP 2HDMI 3

ENTER

HDMI 4

BORDER CROP

INFO

CURTAIN

MEMORIES

RGBHV

HDMI 1 SDI

ASPECT

ZOOM PAN

ON/OFF

DISPLAY
PROFILES

VIEWING

MODES

INPUT

ASPECT

RATIO

TEST PATTERN

Standby

Info

Curtain

Output Setup

Configuration

Picture Control

Input Adjust

Menu

Border

Zoom

Input Select

(HDMI 1, HDMI 2, HDMI 3, HDMI 4,

Component 1, Component 2,

RGBHV/Component,

S-Video 1, S-Video 2,

Video 1, Video 2, AUTO)

Aspect

Navigation Keys

(Up, Left, Enter, Right, Down)

Exit

Crop

Pan

Power

Input Aspect
Ratio

Viewing Modes

Display Profiles

4:3

16:9

Test Patterns
(Left, On/Off, Right)

8

*

*

*

*

2.0 BASIC OPERATION

R699751 - DreamScaler3 User Manual 11

To install the remote control batteries:

1) Locate the battery compartment on the back of the remote control.

2) Remove the cover from the back. To do this, press the tab attached to the cover and pull the cover with the
guide on the back of the remote control.

3) Remove the old batteries (if applicable).

4) Insert two new AA batteries in the compartment as shown on the inside of the battery compartment. Make sure
the batteries are correctly inserted, observing the proper polarity.

5) After installation, replace the cover and dispose of the old batteries (if applicable).

Menu Navigation

You can control the DreamScaler3 as follows:

•From the front panel controls

•From the remote control

•From a programmed universal remote control

• Using the serial connection on the back panel

The menu navigation controls on the remote control are duplicated on the front panel of the DreamScaler3.

To navigate the menu:

1) Press the Menu button.

2) Use the directional buttons to highlight the parameter you want to change.

3) Press the Enter button to select the parameter and the Left and Right arrow buttons to change the chosen
parameter.

4) Press the Exit button to exit out of the menu/OSD.

Info Screen Button

Press the Info button to display a window that shows information about the system including:

Input Status

Video Source
Signal Type
Audio Source
Aspect Ratio (Frame/Active)

Output Status

Resolution
Frame Rate
Line Rate
Aspect Ratio (Display/Screen)

This screen can be helpful during troubleshooting.

3.0 SETUP

12 R699751 - DreamScaler3 User Manual

3.0 SETUP

3.1 Initial Set-Up

Once you have installed the DreamScaler3 into your system, you must properly configure it for the display device
being driven. The DreamScaler3 is shipped from the factory with the following preset default settings:

• Input Select is set to AUTO, to automatically detect an active input in a pre-configured priority.

• The Digital Video output is selected with RGB 4:4:4 color space

• The output format is set to SMPTE 274M, 1080p@50Hz or 1080p@60Hz according to the active source refresh
rate.

Use either the remote control or the front panel controls to perform the initial setup of the DreamScaler3's output.
The procedure below uses the front panel buttons to perform initial setup.

Accessing the DreamScaler3’s OSD is crucial, not only in allowing you to navigate the menu of the DreamScaler3,
but also to let you know that the DreamScaler3 is sending a compatible signal to the display. If the OSD is not visible
on the display’s screen when you press one of the sub-menu buttons on the remote control, then you must
configure the DreamScaler3 with the Output Setup menu to output a signal that the display can accept.

Use these steps to allow you to see the OSD.

STEP 1 - Power Up

1) Attach the removable power cord to the external power supply.

2) Plug the removable power cord into a wall outlet or power conditioner, if applicable.

3) Plug the small connector attached to the cable that comes out of the power supply into the DreamScaler3.

The DreamScaler3 should power on and display ‘DreamVision Powered by ABT’ on the FPD.

STEP 2 - Connect the scaler to your display

Displays with a DVI or HDMI Input

The default output on the DreamScaler3 is digital RGB 4:4:4 (DVI Standard). If you have changed this setting, follow
these instructions to change the settings back.

1) Press the Menu button on the front panel of the DreamScaler3 once. You should see ‘Main Menu /Input Select’
on the FPD.

2) Press the Up button once. You should see ‘Main Menu / Output Setup’ on the FPD.

3) Press the Enter button. You should see ‘Output Setup / Analog/Digital’ on the FPD.

4) Press the Enter button. You should see ‘Analog/Digital / BNC (Analog)’.

5) Press the Down button to select ‘HDMI (Digital)’ and press the Enter button.

You should see the DreamScaler3’s On Screen Display (OSD) on your screen.

Displays with a Component (YPbPr) Input

1) Press the Menu button on the front panel of the DreamScaler3 once. You should see

2) ‘Main Menu / Input Select’ on the FPD.

3) Press the Up button once. You should see ‘Main Menu / Output Setup’ on the FPD.

4) Press the Enter button. You should see ‘Output Setup / Analog/Digital’ on the FPD.

5) Press the Enter button. You should see ‘Analog/Digital / BNC (Analog)’. If you don’t, press the Up button once
and the press Enter. You should see ‘Output Setup / Analog/Digital’ on the FPD.

6) Press the Down button four times. You should see ‘Output Setup / Color Space’ on the FPD.

7) Press the Enter button once. You should see ‘Color Space / YPbPr’ on the FPD. If you don’t, press the Up but­ton once and press Enter. You should see the DreamScaler3’s on screen Display (OSD) on your screen.

The DreamScaler3 cannot output a component signal if the input signal is from a DVI or HDMI source with
HDCP. Instead the DreamScaler3 outputs a blue screen.

3.0 SETUP

R699751 - DreamScaler3 User Manual 13

Displays with a VGA HD-15 (Computer) or 5BNC RGBHV input

1) Press the Menu button on the front panel of the DreamScaler3 once. You should see ‘Main Menu / Input Select’
on the FPD.

2) Press the Up button once. You should see ‘Main Menu / Output Setup’ on the FPD.

3) Press the Enter button. You should see ‘Output Setup / Analog/Digital’ on the FPD.

4) Press the Enter button. You should see ‘Analog/Digital / BNC (Analog)’. If you don’t, press the Up button once
and then press Enter. You should see ‘Output Setup / Analog/Digital’ on the FPD.

5) Press the Down button four times. You should see ‘Output Setup / Color Space’ on the FPD.

6) Press the Enter button once. You should see ‘Color Space / RGB’ on the FPD. If you don’t, press the Up button
once and press Enter. You should see the DreamScaler3’s on screen Display (OSD) on your screen.

STEP 3 - Connecting your Sources to the DreamScaler3

Up to 12 video sources can connected to the DreamScaler3. Use the following suggestions for connections to
several popular video sources.

VCR/LD Player/DVR

The DreamScaler3 cannot output an RGBHV signal if the input signal is from a DVI or HDMI source with
HDCP. Instead the DreamScaler3 outputs a blue screen.

Some VCRs and LD players have S-Video outputs. These give an improved picture from these sources. If
your LD player or DVR has a digital audio output, DreamVision recommends you use that connection..

HDMI

INPUT

1234

INPUT

OUTPUT

1

324

DIGITAL AUDIO SERIAL PORT

ANALOG AUDIO INPUT

Y (G) Pb (B) Pr (R) H V

DC In

+6V @5A

POWER

Y (G) Pb(B) Pr (R)

1

212

121

2

S-VIDEO VIDEOCOMPONENT

LR

ANALOG VIDEO

OUTPUT

SDI
INPUT

I

N

P
U
T
S

SYNC

I
N
P
U
T

O
U
T
P
U
T

12:00

VIDEO

AUDIO

L

R

IN OUT

S-Video

Composite
Video

L-A nalog

Audio

R-An alog

Audio

VCR/LD Player/DVR

3.0 SETUP

14 R699751 - DreamScaler3 User Manual

DVD Player/DVD Recorder

Note:

If you have a display with an HDMI/DVI input, DreamVision recommends you use the DVI/HDMI output of your DVD
player with the player’s output resolution set to the lowest output resolution (preferably 480i). If you have a display
with only component or RGBHV inputs, use either an SDI or component video connection. SDI outputs typically
need to be added to your DVD player. This gives the additional benefit of skipping an extra digital-to-analog (D-to-A)
and analog-to-digital (A-to-D) step for a picture with even more detail then a component connection. With a
component connection, set the player’s output to 480i, minimizing the amount of processing done in the player.

DVI-D OUT (HDCP)

HDMI OUT

OPTICAL

COAXIAL

HDMI

HDMI

SDI OUT

HDMI

INPUT

1234

INPUT

OUTPU

T

1

3

2

4

DIGITAL AUDIOSERIAL PORT

ANALOG AUDIO INPUT

Y (G) Pb (B) Pr (R) H V

DC In

+6V @5A

POWER

Y (G) Pb (B) Pr (R)

1

212

121

2

S-VIDEO VIDEOCOMPONENT

L

R

ANALOG VIDEO

OUTPUT

SDI
INPUT

I
N
P
U
T
S

SYNC

I

N

P

U

T

O
U

T
P

U

T

DVI-D

DVI -

HDMI

HDMI Optical

Audio

Coaxial

Audio

SDI

COMPONENT OUT

Component

DVD Player/ DVD Recorder

3.0 SETUP

R699751 - DreamScaler3 User Manual 15

High-Definition Set Top Box or DVR/D-VHS

Note:

Some set top boxes require you to switch the output resolution. This means that if you are watching an HD channel
you must manually switch the output resolution to 720p/1080i/p, or if you are watching an SD channel, you must
manually switch the output resolution to 480i or 480p, 480i preferably. If your display only has component or RGBHV
inputs, use the component output from your HD source.

COMPONENT OUT

High-Definition Set Top Box or DVR/D-VHS