Dream Support DSGIBBRQN, DSGIBGYQN User Manual
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 4
F
F
Platform Bed
Assembly Instructions
Contains One Bed and Hardware
STEP 5
O
Insert the Center Rail (Part F) into the brackets on the
Headboard and Footboard. Using a screwdriver, secure the
center rail using two 16mm Screws (Part O).
G
P
Roll out the Wood Slat System (Part G) and secure it in place
using nine 32mm Screws (Part P). Use the pre-drilled holes
and a screwdriver.
A A
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a at
surface and verify you have all of the following parts and hardware.
TOOLS REQUIRED:
Phillips Screwdriver
ASSEMBLY INSTRUCTIONS
STEP 1
PARTS LIST
A. Headboard Top (1 pc) B. Footboard (1 pc) C. Side Rail (2 pcs)
D. Headboard Leg (2 pcs) E. Footboard Leg (2 pcs)
G. Wood Slat System (1 pc)
H. Center Leg (3 pcs)
F. Center Rail (1 pc)
I. Support Bar (1 pc)
A
D2
D1
Assemble the Headboard Legs (Part D1 and D2) to the Headboard (Part A) using six 40mm Bolts (Part J), six
Spring Washers (Part K) and six Flat Washers (Part L). Use the Small Hex Key (Part M) to secure the bolts. Be sure to
use Part D1 for the right side and Part D2 for the left side of the headboard. Next secure the Support Bar (Part I) to
the Headboard Legs (Part D) using two 40mm Bolts (Part J). Use the Small Hex Key (Part M) to secure the bolts.
STEP 2
M
J
K
L
I
D1
STEP 3
I
J
M
HARDWARE LIST
J. 40mm Bolt
(11 pcs)
M. Small Hex Key
(1 pc)
N. Large Hex Key
(1 pc)
K. Spring Washer
(6 pcs)
O. 16mm Screw
(2 pcs)
L. Flat Washer
(6 pcs)
P. 32mm Screw
(9 pcs)
B
E
M
J
F
H
Secure the Footboard Legs (Part E) into the Footboard (Part B).
Screw the Center Legs (Part H) into the Center Rail (Part F)
using three 40mm Bolts (Part J). Secure the bolts using Small
Hex Key (Part M).
N
C
Attach the siderails (Part C) to the Headboard (Part A) and the
Footboard (Part B) by hanging the siderails onto the pre-attached
bolts on the Headboard and Footboard. Tighten the bolts using
Large Hex Key (Part N).
A A
(Continued on back)
Loading...