Dream Support DS18BLACKCK Planning Guide

Page 1
Platform Bed Instructions
Step 1. Take all components out of the box
and lay them out on the oor.
Note. For twin size there is only one piece.
Step 4. Flip the base over to stand upright. Follow the same
steps to assemble the other base unit.
Step 2. Unfold each half and lay at. Raise all six legs to upright position. Each of the four end legs have separate support arms. Rotate support arms to hook on to the bolts and tighten with installed wing nuts. Note: The two center legs do not require wing nuts.
Step 5. Insert two halves together with keyhole locked in place.
Enjoy your new bed frame!
Watch a video with
these instructions:
A
Loading...