DREAMS WOODSTOCK Ottoman King Bed Assembly Instructions Manual
WOODSTOCK Ottoman
King Bed
Page 1of 8
Assembly Instructions
1. We suggest you spend a short time reading through this leaflet and then
follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the
effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the.
Assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they
remain fully tightened.
7. Keep glue and fittings out of children’s reach.
In the unlikely event that this product has missing or damaged parts, please
Before you
Start, here
are some
helpful
advices.
Page 2of 8
PARTS Fittings
NO. PART LIST QTY
(1) HEADBOARD 1
(2) FOOTBOARD 1
(3) SIDE RAILS ( Right ) 1
(4) SIDE RAILS ( Left ) 1
(5) CROSS BAR 2
(6) OUTER BAR 2
(7) INNER BAR 1
(8) BOTTOM BOARD 4
(9) BOTTOM BOARD 2
(10) METAL SLAT ASSEMBLY 1
(11) METAL MATTRESS STOPER 1
A
C
H
I
B
Allen bolts
M8×80mmx2pcs
D
E
M4 Allen key × 1pc
F
GLIDES x 2psc
G
11Spanner × 1pc
Flat Washer M8 x10pcs
HEX NUT M8 x10pcs
Philips headbots
M8×50mmx8pcs
HEX NUT M8 x2pcs
NYLON STRAP=1 x1pc
ASSEMBLY
STEP 1
Page 3 of 8
(1) Use bolt (mounted
on the headboard and footboard)
to fix the side rail (3) onto
Headboard (1) and Footboard (2)
by using Allen Key (C).
(2) Place the assembled Bed
frame in the desire location of
the room
(3) Fully tight all bolts 100%
using allen key (C) , Make sure
both Side Rails (3) (4) are square
/90° fixed with the Headboard
(1) and Footboard (2).
Loading...