Dreams Valencia Bedstead User Manual

1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.

2. If you follow the instructions carefully the end result should be worth the effort.

3. Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.

4. Assemble this product on a carpet.

5. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.

6. We recommend a periodic check on all fixing points to make sure they remain fully tightened.

7. Keep glue and fittings out of children’s reach.

In the unlikely event that this product has missing or damaged parts, please call 08442 920000 to obtain spares

Before you start, here is some helpful advice

Caution when unpacking the guest unit. The legs are spring loaded and if opened without due care can cause injury.

VALENCIA SINGLE BED (GUEST UNIT)

Assembly Instructions

NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that the bed will be used in.

1 of 5

Component parts and fittings contained in the box

PARTS

Fittings

A B

JCN Nut 6pcs

4MM Allen key 1pc

Connector 4pcs

Connecting bolt 4pcs

M6 x35mm 6pcs

Spanner 1pc

Ф8 Spring Washer 4pcs

M8 Nut 4pcs

Ф10x40 Dowel 8pcs

1 piece

2 pieces

2 of 5

+ 3 hidden pages