DREAMS VALENCIA Assembly Instructions Manual

1 of 5

VALENCIA SINGLE BED (GUEST UNIT)

Assembly Instructions

NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that
the bed will be used in.

1. We suggest you spend a short time reading through this leaflet and then
follow the simple step by step instructions.

2. If you follow the instructions carefully the end result should be worth the effort.

3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.

4. Assemble this product on a carpet.

5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly . Only upon completion of the assembly
should all fixing points be fully tightened.

6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.

7. Keep glue and fittings out of children’s reach.

In the unlikely event that this product has missing or damaged parts, please call

0870 3333 612 to obtain spares

Before you
Start, here
is some
helpful advice

Caution when unpacking the
guest unit. The legs are spring
loaded and if opened without due
care can cause injury.

2 of 5

Component parts and fittings contained in the box

PARTS Fittings

A

B

C

D

E

F

G

H

I

JCN Nut 6pcs

4MM Allen key 1pc

Connector 4pcs

Connecting bolt 4pcs

M6 x35mm 6pcs

Spanner 1pc

Ɏ8 Spring Washer 4pcs

M8 Nut 4pcs

Ɏ10x40 Dowel 8pcs

1 piece

1 piece

1 piece

2 pieces