DREAMS TRAFALGAR User Manual
Parts Identification
Parts Checklist
Page 1 of 13
4
3
2
*
Only supplied if upgraded sprung slat frame system chosen
Legs (9&10) only supplied with sprung system
TRAFALGAR TV-AUDIO BED
Double, King & Super King sizes
160407
PLEASE READ
this sheet prior to assembly to familiarise
yourself with the various stages of construction. Carefully
open the pack supplied and check the contents against the
parts and fittings check list.
Do not destroy any of the packaging until you are certain
that you have all the necessary parts for the assembly.
Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
CAUTION: There are small components used in the
construction of this unit. These loose items should be kept
away from young children during assembly, to avoid the
danger of choking.
IMPORTANT: BEFORE STARTING TO ASSEMBLE THE BED - PLEASE READ THESE INSTRUCTIONS CAREFULLY.
Note:
Standard wooden slat frame (part 6)
Upgraded sprung slat frame (part 8)
1
6
7
8
9
10
5a
5b
11
12
13
14
15
15
16
18
19
17
17
20
23
b
21
22
21
24
27
28
26
25
Qty
Qty
Ref. Description DescriptionRef.
1
2
3
4
7
6
5a&5b
8
9
10
11
1
1
1
1
1
1
1
2
1
Media Tray Base Panel
Media Tray Side Panel-L
Media Tray Side Panel-R
Media Tray Back Panel
Media Tray Support Legs
1
12
13
14
28
16
17
18
19
20
21
22
*Upgraded Sprung Slat Frame*
1 Pr
1
1
1
3
1
3
Drawer Face Panel
Drawer Side Panels
Drawer Front Panel
Drawer Back Panel
Drawer Bottom Panel
Drawer Bottom Support Rails (Ends)
Drawer Bottom Support Rail (Centre)
Mains Power Lead - 3 metre
Aerial Lead - 4 metre
HDMI Leads
Cable Ties
Cable Clips
Remo 2.10 User Manual
90º Adaptor
15
2
2
1
1
1
2
1
Headboard
Footboard
Side Panel - Left
Side Panel - Right
Adjustable Support Legs
Wooden Slat Set
Wooden Slat Set Support Leg
*Sprung Slat Frame Centre Support Leg*
*Sprung Slat Frame Support Legs*
23
24
25
26
27
1
1
Inside
accessory
box
e
1
e
1
2
QtyCode Description
A
x16
Fittings Checklist
D
x16
Spring Washers (for M8 bolts)
E
Flat Washers (for M8 bolts)
Qty
Code Description
C
B
Allen Key (for M8 bolt)
x1
x4
Bolts (M8x30mm) for
fitting side panels (3&4)
to headboard & footboar d (1&2)
Screws (3x20mm) for fitting
wheels (S) to drawer bottom
support rails
Screws (4x30mm) for fitting
drawer face panel (16)
S
Drawer Wheels
x5
Bolts (M8x45mm) for
fitting adjustable support
legs (5)
to
side panel (3)
x4
M x6
Spring Washers (for M6 bolts)
EXTRA HARDWARE NEEDED WHEN FITTING UPGRADED SPRUNG SLAT FRAME
Note: The following fittings will be found in the box which contains the upgraded metal frame itself.
Qty
HARDWARE FOR FITTING WOOD SLATS OR UPGRADED SPRUNG SLAT FRAME (PACK B)
J
x1
Allen Key (for M6 bolt)
G x6
Sleeve Nuts - M6
Bolts (M6x40mm) for
fitting the wooden slat set (6)
or the sprung slat frame (8) to
side panels (3&4)
x6
x7
Flat Washers (for M6 bolts & 5mm screw)
H
F
Screw (5x50mm) for
fitting slat suport leg (7)
K
x1
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
Qty
Code
WHEELS FOR DRAWER (PACK D)
Screws (5x50mm) for
assembling drawer panels
Description
a
x20
QtyCode Description
A
x6
Q
x20
R
Qty
Code Description
N
P
Plastic Barrel Nuts
x27
Bolts (M8x30mm) for
dna )51( sgel yart adiem gnittif
fitting media tray to side panel (3)
x27
HARDWARE NEEDED FOR DRAWER & MEDIA TRAY ASSEMBLY (PACK C)
x8
Code Description Qty Code Description
D
Flat Washers (for M8 bolts)
x4
Page 2 of 13
TV INSTALLATION KIT - Inside Pack (A)
Bolt Sets (M6x25mm)
L
Bolts (M6x15mm) for fitting
support legs (9&10) to the
sprung slat frame (8)
x8
9
Sprung slat frame
centre support leg
Sprung slat frame support legs
x1
10
x2
b
x1c
Allen Key for Lid-Lifter - 2.5mm
x1
d
Spanner (for 9mm Domed Nut)
x6
Self-Adhesive Pads - 3mm
(are inside accessory box)
x1
e HDMI 90º Adaptor
In the unlikely event of missing or
damaged parts, please
contact the customer service team on 0344 292 00 00.
When
calling this number, please quote the part code
reference numbers shown in this leaflet when
requesting spare or replacement parts.
Please retain your assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
Additional Tools Required
General Hints & Tips
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
Intersecting
Hole
Care & Maintenance
Cross-head Screwdriver
We recommend the bed is
assembled in
the room it shall be
located in.
Page 3 of 13
Stage
1
B D
ARROWS ON LABELS POINT
TOWARDS EACH OTHER
D
B
3
Bed Assembly - Use Pack 'A'
x4 x4
5b
E
x1
Fix support legs (5) from inside the bed
into the pre-threaded holes in the side
panel (3) using bolts (B) & flat washers (D).
Make certain the labels are as shown in
the diagrams - they must point towards
each other. The legs are then in correct
place to stop the drawer going under the
bed. Tighten with Allen key (E).
Carefully adjust feet clockwise so they just touch the floor
keeping side panels level when bed is in use.
B
D
5a
Adjustable Feet
A ssembly requires
two persons.
Approximate time to
assemble this product
1.5
HRS
Stage
2
4
2
x16 x16 x16
x1
A
C D E
Note: Do not tighten fully but leave 10mm protruding as in the diagram.
A
C
D
i)
Fit bolts to headboard &
footboard (1&2) like this.
1
2
b.
3
4
&
&
3
4
&
Bed Assembly - Use Pack 'A'
iii)
Once all four corners are located, make sure the bed is square
as in the sketch,
then tighten all the bolts 100% using Allen key (E).
1
Page 4 of 13
3
ii)
Fit the side panels
locating the brackets
behind the flat washers.
Loosely insert four sets of bolts (A) with spring washers (C) & flat washers (D) into each side of headboard &
footboard (1&2).
a.
10mm
Loading...