Dreams Milan Bedstead User Manual
1. We suggest you spend a short time reading through this leaflet and then
follow the simple step by step instructions.
2. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
3. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the
assembly should all fixing points be fully tightened.
4. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
5. Keep glue and fittings out of children’s reach.
In the unlikely event that this product has missing or damaged parts, please
call 08442 920000 to obtain spares.
Before you
start, here
is some
helpful advice
Minimum No. of people
recommended to assemble
this product:
Approx assembly time:
MILAN B/S
Assembly Instructions
NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that
the bed will be used in.
1 of 5
Component parts and fittings contained in the box
PARTS
Fittings
A
B
C D E
5MM Allen key 1pc
4MM Allen key 1pc
M6 x35mm Bolt 6pcs
M6 JCN Nut 6pcs
Spanner 1pc
1 piece
1 piece
2 pieces
2 of 5
Loading...