DREAMS Mid Sleeper Assembly Instructions Manual
Mid Sleeper
Assembly Instructions
Need assistance?
Call: 0344 292 0000
Dimensions mm Length Width Height
Single
2039 1031 1500
Approximate time to
assemble this product
1
Retain these instructions
for future reference
2 x people recommended to
assemble this product
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
You will require a cross
head screwdriver
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 11
IMPORTANT: Read these instructions
carefully before attempting to assemble.
Retain these instructions for future
reference.
15
Page 2 of 11
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
Fittings Checklist
Parts Checklist
Ø6.3 x 100mm Bolt
x 28
x 8
Ø10 x 40mm Wood Dowel
Ø6.3 x 30mm Bolt
Check size of fixings against this guage (dimensions in mm)
1 0
2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0
x 22
x 30
x 9
A
M4 Allen Key
x 1
G
D
B
C
F
7 x 100mm Screw
4 x 40mm Screw
Half Round Nut
x 8
E
Top Rail x2pcs
Upper Headboard x2pcs
Leg x2pcs 3a=1pc, 3b=1pc
Leg
Leg
Leg
Long Guardrail x2pcs
Short Guardrail x2pcs
Upper Back Side Rail
Upper Front Side Rail
Guardrail Support x3pcs
Long Bar
Complete Twin Slat x1set
Ladder Step x3pcs
010203040506070809
10
x 6
I
Ø7 x 80mm Bolt
Ø6.3 x 40mm Bolt
x 6
H
111214
Short Bar x2pcs
13010102020304050607070808091011111112131414141515
03
b
a
Page 3 of 11
Bed Frame Assembly
1
2
x 2
Ø6.3 x 40mm Bolt
x 6
7 x 100mm Screw
x 1
Ø10 x 40mm
Wood Dowel
D
H
C
Fully Tighten bolts when the
bed frame is assembled
and in position
x 1
M4 Allen Key
G
x 2
Ø6.3 x 40mm Bolt
x 6
7 x 100mm Screw
x 1
Ø10 x 40mm
Wood Dowel
D
H
C
C
GDC
D
01010202040306
H
H
15
15a03
b
curved
edge
H
H
curved
edge
D
04
03a03b06
Page 4 of 11
Bed Frame Assembly
3
4
x 3
7 x 100mm Screw
x 6
Ø10 x 40mm
Wood Dowel
C
D
x 2
Half Round Nut
E
x 2
Ø6 x 100mm Bolt
A
C
DAE
0707120904
03a04
03a1204090707
Loading...