Dreams Messina Bedstead User Manual
MESSINA BEDSTEAD
Parts Identification
PLEASE READ
yourself with the various stages of construction. Carefully
open the pack supplied and check the contents against the
parts and fittings check list.
Do not destroy any of the packaging until you are certain
that you have all the necessary parts for the assembly.
Please ensure that the packaging is disposed of in a
safe environmentally friendly way.
CAUTION: There are small components used in the
construction of this unit. These loose items should be kept
a way from young children whilst assembling your unit to
avoid the danger of choking hazards.
this sheet prior to assembly to familiarise
6
5
1
3
3
Parts Checklist
Ref. Description
1
2
3
4
5
6
Headboard
Footboard
Leg
Side Rail
Wooden Slats
Metal Sprung Slat System*
14
4
2
4
3
Qty
3
Note:
Standard wooden slat frame (part 5)
Upgraded sprung slat frame (part 6)
1
1
4
2
1 Set
1 Frame
*Only supplied if upgraded sprung system chosen
Page 1 of 4
Fittings Checklist
QtyCode Description
Bolt (M8x30mm)
A
B
D
E
Spring Washer
Washer (17x8mm)
C
Allen Key (5mm)
Bolt (M6x40mm)
x8
x8
x8
x1
x6
F
H
Sleeve Nut (M6x1mm)
)ODW Washer (6mm)
G
Screw (4x5mm)
Allen Key (4mm)
I
QtyCode Description
x6
x6
x16
x1
Note: The following fittings will be found in the box which co ntai ns the Sprung Slat Frame. They are not in the main
hardware pack, of the bed itself.
Bolt (M6x15mm)
J
Suppo rt Le g
L
Additional Tools Required
/RQJCrosshead 3R]LScrewdriver
x8
x2
K
Centre S upport Leg
x1
Care & Maintenance
In the unlikely event of missing or damaged parts, please
contact the customer service team on 08442 920000.
calling this number, please quote the part code
When
reference numbers shown in this leaflet when
requesting spare or replacement parts.
General Hints & Tips
Please
tools provided, for future use. Periodically
check that all bolts are still tight.
This
people.
retain your Assembly Instruction and
assembly requires two
Intersecting
Hole
Page 2 of 4
fitting barrel nuts into
When
the
fitted the correct way so the
hole is facing towards the
intersecting hole.
We
assembled
be located in.
panels, ensure they are
recommend the bed is
the room it will
in
Loading...