DREAMS KIMBERLEY BED Assembly Instructions Manual
KIMBERLEY BED
Assembly Instructions
Minimum No. of people
Recommended to assemble
This product.
Approx assembly time:
X
NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that
the bed will be used in.
Before you
Start, here
is some
helpful advice
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the assembly
should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children’s reach.
In the unlikely event that this product has missing or damaged parts, please call
to obtain spares
1 of 5
Component parts and fittings contained in the box
PARTS Fittings
A
Connector 8pcs
B
1 piece
2 pieces
Connecting bolt 8pcs
C
M8 Nut 8pcs
D
Ɏ8 Spring washer 8pcs
E
Dowel 4pcs
1piece
F
M6 x 35 Bolt 6pcs
G
M6 x 22 Jcn Nut 6pcs
H
Spanner 1pc
I
4MM Allen key 1pc
2 of 5
Loading...