DREAMS Jade Single Bunk Assembly Instructions Manual
Jade Single Bunk
Assembly Instructions
Need assistance?
Call: 0344 292 0000
Dimensions mm Length Width Height
Single
2010 1000 1600
Approximate time to
assemble this product
Retain these instructions
for future reference
2 x people recommended to
assemble this product
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
You will require a cross
head screwdriver
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 13
1
Page 2 of 13
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
Fittings Checklist
Parts Checklist
Ø6 x 65mm Bolt
x 7
Check size of fixings against this guage (dimensions in mm)
10
20 30 40 50 60 70 80 90 100 110
A
Top Bed Legs 2pcs
Top Bed Legs x2pcs
02
Base Head Frames x4pcs
01
03
Connect Round
Tubes x4pcs
04
Base Legs x2pcs
05
Base Legs x2pcs
Side Rail x4pcs
06
07
Bed Connectors x4pcs
08
Bed Connectors x4pcs
09
Inside Frame
Protect Frame
10
11
Ladder
12
Ø6 x 45mm Bolt
x 3
B
Ø6 x 20mm Bolt
x 56
C
Washer
x 27
D
M6x18 Nuts
x 3
E
Caps Dia 10mm
x 28
H
Caps Dia 50mm
x 8
F
Allen Key M4
x 2
G
Round Tube
x 80
I
01
01
01
01
03
03
04
04
04
05
05
06
06
07
07
07
07
08
08
08
08
10
04
09
09
09
09
11
12
02
02
Page 3 of 13
Bed Frame Assembly
1 x2
x 8
Washer
D
x 8
Ø6 x 20mm Bolt
C
x 1
Allen Key M4
G
x 8
Washer
D
x 8
Ø6 x 20mm Bolt
C
05
06
2 x2
D
G
01
01
D
G
03
C
C
02
Page 4 of 13
Bed Frame Assembly
3
4
x 4
Ø6 x 20mm Bolt
C
x 4
Ø6 x 20mm Bolt
C
C
G
C
G
01
01
03
03
02
02
Note: Leave 10 mm
protruding as in the
diagram.
Note: Leave 10 mm
protruding as in the
diagram.
05
05
05
06
06
02
10mm
10mm
Loading...