DREAMS Detroit Bed Assembly Instructions Manual
Detroit Bed
Assembly Instructions
Need assistance?
Call: 0344 292 0000
Dimensions mm Length Width Height
SuperKing
2400 1970 1195
Approximate time to
assemble this product
Retain these instructions
for future reference
2 x people recommended to
assemble this product
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
You will require a cross
head screwdriver
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 9
4
3
King
2400 1670 1195
Double
2300 1520 1195
Page 2 of 9
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
Feet
Fittings Checklist
Parts Checklist
1/4 x 50mm Bolt
x 11
x 6
Ø8 x 35mm Bolt
Check size of fixings against this guage (dimensions in mm)
1 0
2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0
x 4
D
A
B
Flat Washer
x 15
C
01 Head Board
Foot Board
Side Rail x2
02
03
Drawer Front
04
Drawer Side x2
05
Drawer Bottom
06
Bar x2
07
Drawer Front
08
Drawer Back
09
Bar x2
10
16mmL Screw
Center Leg
Cam Pin
x 8
E
50mmL Tapping Screw
x 1
J
x 1
H
x 12
I
Allen Key M5
1/4 x 20mm Nut
x 6
K
x 1
L
010203
03
Allen Key M4
x 2
M
30mmL Screw
x 16
N
Cam Lock
x 8
F
Caster
x 6
G
04050506071009
08
Page 3 of 9
Bed Frame Assembly
1
2
x 1
Allen Key M5
L
x 4
Feet
D
x 8
Ø8 x 35mm Bolt
B
x4
x4
x4
D
Loosely insert bolts (B) into each side of headboard (1) and foot board (2).
Note: Do not tighten fully but leave 10mm protruding.
Attach the side rails to the headboard and footboard.
Make certain the bed is squared up, then tighten all bolts fully.
B
B
020102
01
L
Loading...