DREAMS Deacon Ottoman Assembly Instructions Manual
Deacon Ottoman bed
Assembly Instructions
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you
have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only
upon completion of the.
Assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children s reach.
In the unlikely event that this product has missing or damaged parts, please call
03442 920000 to obtain spares
Minimum No.of people
recommended to assemble
this product:
Approx assembly time:
2
hour
1
Before you
Start, here
are some
helpful
advices.
Revision number 1/1
Revision number 1/1
PARTS
Fittings
QTY
1
1
4
2
2
NO. PART LIST
(1) HEADBOARD
(2) FOOTBOARD
(3) SIDE RAILS ( R&L)
(4) SUPPORT BRACKETS
(5) BOTTOM BOARD
(6 ) SLATTED BED FRAME ( R&L)
(7 ) JOINING BRACKETS
(8) MATTRESS HOLDER
(9) FABRIC PULL HANDLE
2
2
2
1
ASSEMBLY
STEP 1
(2). Attach the side rails to the
headboard and footboard.
N
ote
: Leave 10 mm protruding as
in the diagram
Revision number 1/1
(1). Loosen the pre-assembled bolts
on the headboard and footboard
with the Allen Key (J) (K) .
Loading...