DREAMS 225-00135, 225-00136 Assembly Instruction Manual

Before you

Minimum No.of people

is some

225-00136 (Sprung slats)

helpful advice

recommended to assemble

start,here

this product

225-00135 (Solid slats)

CORDOVA KING BED

Approx assembly time

We suggest you spend a short time reading through this leaflet and 1.
then follow the simple step by step instructions.
If you follow the instructions carefully the end result should be worth 2.
the effort.
Do not discard any of the packaging until you have checked that you 3.
have all the parts and the pack of fittings.
To ensure an easier assembly, we strongly advise that all fittings are 4.
only finger tightened during initial assembly. Only upon completion of
the. Assembly should all fixing points be fully tightened.
We recommend a periodic check on all fixing points to make sure they 5.
remain fully tightened.
Keep glue and fittings out of children’s reach.6.
In the unlikely event that this product has missing or damaged parts, 7.
please call 08442 920000 to obtain spares

Page 1 of 6

Assembly Instruction

Page 2 of 6

Note:

The following fittings will be found in the box which contains the Sprung

Frame,NOT with the bed frames Assembly Kit.

1(1 piece)

2(1 piece)

3(2 pieces)

A

Ø10 x 40mm x 8pcs.

B

C

D

E

M8 x 65mm x 8pcs.

Ø35 x 8pcs.

M8 x 8pcs.

Spanner x 1pc.

Center leg x 1pc.

M

Support leg x 2pcs.

P

M6 x 12mm x 8pcs.

Allen key 4mm x 1pc.

F

G

M6 x 38mm x 4pcs.

H

N

M6 x 6pcs.

K

L

Ø4 x 40mm x 6pcs.

M6 x 22mm x 4pcs.

F

Allen key 4mm x 2pcs.

PARTS

Fittings