Dream On Me CBSW1262 Owner Manual

Dream On Me Inc.

1532 S WASHINGTON AVE

PISCATAWAY TWP NJ 08854 Email: info@dreamonme.com www.deamonme.com

Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM. We do apologize for any inconvenience this may cause you.

ASSEMBLY INSTRUCTIONS

INSTRUCTIONS D'ASSEMBLAGE

ITEM NO: 679

NUMÉRO DU MODÈLE : 679

Read all instructions before assembling crib. Save instructions for future use.

Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products. Before you begin we recommend that you following the steps below:

1. Please read the instructions thoroughly.

2. Identify all parts and hardware.

s

3. You will need the following tools: Philips head screw driver Flat head screw driver

Hammer

Do Not Use Power Drills or Drivers To protect your parts during assembly please place them on a soft surface. To clean surface use only water on a damp cloth. Do not use window cleaners or cleaning abrasives as it will scratch the surface and could damage the protective coating.

Lisez attentivement les instructions avant l'assemblage du lit. Gardez le manuel pour future référence. L'assemblage de ce meuble par un adulte est nécessaire. Non-assemblées, les petites pièces présentent le risque d'étouffement. Pour vous aider pendant l'assemblage de votre produit, veuillez trouver en bas des instructions simples, en étapes. Avant de commencer l'as

-

semblage, les étapes suivantes sont vivement recommandées :

1. Lisez attentivement les instructions.

2. Identifiez toutes les pièces et la quincaillerie

3. Vous avez besoin des outils suivants : Tournevis cruciforme Tournevis plat

MADE IN CHINA

1

Marteau N'utilisez pas d'outils électriques. Pour protéger les pièces pendant l'assemblage, placez-les sur une surface souple. Pour nettoyer la surface du meuble n'utilisez que de l'eau sur une lingette humide. N'utilisez pas des nettoyants à vitre ou des nettoyants abrasifs, car ils vont égratigner cette surface et endommager le fini.

Scan the QR code to register your product

https://dreamonme.com/customercare/registration/

MADE IN CHINA

2

· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

· READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.

FOR FUTURE USE. ANY MATTRESS USDED IN THIS CRIB MUST BE AT LEAST 51-5/8 INCHES BY 27-1/4 INCHES WITH A THICKNESS NOT EXCEEDING 6 INCHES.

· CHECK THIS PRODUCT FOR DAMAGED HARDWARE,LOOSE JOINTS,MISSING PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.1532 S

WASHINGTON AVE PISCATAWAY TWP NJ 08854

INSTRUCTIONAL LITERATURE IF NEEDED.

· TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, OTHERWISE ADVISED BY YOUR PHYSICIAN.

· STRINGS CAN CAUSE STRANGULATION!DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH A STRINGS TO TOYS.

· TO HELP PREVENT STRANGULA TION TIGHTEN ALL FASTENERS.A CHILD CAN TRAP PARTS OF THE BOD YOR CLOTHING ON LOOSE FASTENERS.

· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS MAY STRANGLE A CHILD.

· WHEN CHILD IS ABLE TO PULL TO A ST ANDING POSITION, SET MATTRESS TO THE LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THATCOULD SERVE AS STEPS FOR CLIMBING OUT.

· WHEN CHILD IS ABLE TO CLIMB OUT OR REACH THE HEIGHT OF 35 IN.(89CM), THE CRIB SHALL NO LONGER BE USED.

· D

O NOT USE A WATER MATTRESS WITH THIS CRIB.

· INFANTS CAN SUFFOCATE ON SOFT BED DIN COMFORTER.NEVER PLACE ADDITIONAL PADDING UNDER AN INFANT.

· NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.

· INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO SMALL.

· REPLACE TEETHING RAIL IF DAMAGED,CRACKED OR LOOSE.

· IF REFINISHING,USE A NON-TOXIC PRODUCTS.

· FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB.SEE HEAD PANNEL AND MATTRESS SUPPORT FOR WARNI

INISH SPECIFIED FOR CHILDREN'S

F

NGS AND INSTRUCTIONS.

FOR REPLACEMENT PARTS AND

DO NOT SUBSTIT

G,NEVER ADD A PILLOW OR

KEEP INSTRUCTIONS

UTE PARTS.

PLEASE NOTE THAT THE WARNING STICKER IS PLACED ON THE CRIBS TO KEEP PARENTS AND CRAEGIVERS INFORMED IT IS A REQUIREMENT BY LAW UNDER CPSC AND ASTM.WE DO APOLOGIZE FOR ANY INCONVENIENCE THIS MAY CAUSE YOU.

3

1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854

J

4

CONNECTION HARDWARE

(a) 2-1/8" Bolt (24PCS)

(b) 3" Bolt ( 4 PCS)

(c) 5/8" Bolt (4 PCS)

(4 PCS)

(f ) Allen wrench (1PC)

f

(g) Washer (2PCS)

g

(h) Screw (2PCS) (h)

(d) Barrel nu t (28PCS)

(e1) Wood dowel (8PCS) (e1)

( )

e2

Wood dowel (12

(e2)

PCS

(12

PCS

( i ) Belt (1PC)

( i )

(j ) Tip over restraints (1PC) (j )

)

PHIL LIPS--HE AD SCREW DRIVE R

ASS EM BLY

----NOT INC LU DE

REQ UIRED FOR

5

PARTS ENCLOSED IN CARTON

(C) Changer top rail (2PCS)

(A) Changer left side (1PC)

(E) Changer middle rail (3PC) (F) Changer shelf (3PCS)

(D) Changer shelf

support (6PCS)

3

(H) Crib side rail (2PCS)

(J) Metal spring support

platform (1PC)

(G) Crib left headboard (1PC)

(K) Changer pad (1PC)

6

(B3) Changer longer top rail (1PC)

(B4) Changer longer middle rail 1(1PC)

(B5) Changer longer middle rail 2 (1PC)

(B1) Changer back leg (1PC)

STEP 1

b

e1

B1

e1

(B2) Changer front leg (1PC)

d

B3

B4

d

B5

d

e1

(B6) Changer longer bottom rail(1PC)

Use allen wrench(f) to connect bolts.

Connect

changer longer top rail (B3), changer longer middle rail 1(B4), changer longer middle rail 2(B5), and changer longer bottom rail (B6) to changer back leg (B1) and chang front leg (B2) by using wood dowel (e1),

b

B2

barrel nut (d) and 3”bolt (b).

e1

er

f

B6

B2

B6

d

e1

X 4

b

e1

b

d

(B) Changer right side (1PC)

7

STEP 2

Use allen wrench(f) to connect bolts. Connect changer top rail(C) to changer right side (B)by using wood dowel (e1),barrel nut(d) and

2-1/8”bolt(a). Connect changer shelf support (D)to changer right side (B) by using barrel nut (d) and 2-1/8”bolt(a).

C

e1

B

D

d

a

D

e1

a

C

a

d

e1

C

f

B

D

d

D

e1

B

d

D

d

D

a

d

a

d

a

STEP 3

Lay down the assembled parts on the floor. Slide the changer shelf(F)into the grooves on changer shelf support(D)and the changer right side (B). Assemble changer middle rail(E)to the changer right side(B) by using wood dowel(e2).

a

e2

E

(e2).

B

E X 3

B

8

F

E

F

E

F

C

D

E

D

B

STEP 4

Assemble the Changer left side(A) to the assembled part of STEP 3 use the same way as shown in STEP2.

a

(A)

a

d

e1

A

a

d

a

d

a

d

a

d

F

E

d

D

F

D

B

d

F

D

e1

d

C

A

F

C

F

D

F

D

C

A

F

d x 8

B

a x 8

D

CHANGER

9

STEP 5

Use allen wrench (f) to connect bolts. Connect crib side rail (H) to the assembled parts of STEP 4 and crib left headboard (G) by using barrel nut (d) and 2-1/8” bolt (a).

a

A

f

G

a

d

a

H

B

d

a

d

STEP 6

Locate the metal spring support platform Be sure the smooth side of the metal spring support platform ( J) is faced Position the tabs of the metal spring support platform (J) to mount to the selected position in the legs.

Insert the 5/8" bolt (c),through the tabs

and into thread inserts,then tighten securely with allen wrench (f ).

upward.

(J) with tabs.

d

A

a

H

d

X 4

B

A

H

G

J

H

c

A

X 4

J

.

f

10

STEP 7

Assemble crib side rail(H ) to the assembled parts use the same way as shown in STEP 5.

a

A

STEP 8

1. Assembly the belt (i) to the changer side (A&B) using washer (g) and screw (h).

2. Add the changer pad (K).

3. Put the child on the pad,then insert safty restraint system of the tape across child's

waist. The tightness can be adjusted by

increasing the tension of the tape.

H

d

a

G

H

d

G

a

d

H

d

a

X 4

i

g

(h).

B

i

A

i

F

K

PHIL LIPS--HEAD SCREWD RIV ER

ASS EM BLY

----NOT INC LU DE

i

B

F

h

g

REQ UIRED FOR

X 2

11

STEP 9

12

FURNITURE TIPPING DETERRENT HARDWARE

j

HOW TO LOCK

Tipping furniture may injure young children. Use of this tipping restraint hardware is highly recommended. When properly instated this hardware could provide protection against the unexpected tipping of furniture due to improper use.

WARNING

This hardware is only a deterrent.Adult supervision is the only proper deterrent to prevent

improper use of any potentially hazardous product.

1. Attach one of the mounting brackets securely to the back top edge of the furniture using the short screw.

2. Find the stud in the wall and mark the location on the wall for mounting the second

bracket using a 2” wood screw approximately 2” below the bracket mounted to of the furnitur

3. If a stud cannot be found,purchase a “Hollow-Wall Anchor Bolt” and attach the second

e.

the edge

bracket to the wall using that bolt.Make sure to follow all instructions by the manufacturer.

4. Place the furniture so the bracket on the back edge is in line with the bracket on the wall.

5. Lace an end of the nylon restraint strap down through each bracket.Bring both ends

together and slide the bea

other end tightly.Pull down on the beaded end until it snaps locks into the keyhole.

6. Check to make sure the strap is securely laced and locked to the brackets.

ded end of the strap through the key hole shaped slot in the

13

j

14

Converting crib to a day bed

(bottom bar and converting bolts are sold separately)

ATTENTION : Please remove the wheels when the crib is converted to day bed.

e1

a

d

a

d

a

X 2

15

Converting crib to a toddler bed

(toddler rail and converting bolts are sold separately)

Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM. We do apologize for any inconvenience this may cause you.

ATTENTION : Please remove the wheels when the crib is converted to a toddler bed.

16

LIMITED WARRANTY

workmanship and agrees to remedy any such defect.

This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.

assembled, subjected to misuse or abuse or which has been altered or repaired in any way.

rights which vary from State to State.

WARNING: Should this product become damaged, and/or components are broken or missing, DO NOT USE

17

1532, S. Washington Avenue

Piscataway, NJ 08854

E-mail: info@dreamonme.com

www.dreamonme.com

Follow us on

@dreamonmeinc

to get your nursery featured on our social media.

Enter our monthly giveaway!

Simply scan the QRcode to register.

For any questions or concerns or feedback.

Chat with us!

Dream On Me CBSW1262 Owner Manual

Specifications and Main Features

Frequently Asked Questions

User Manual