Page 1
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
ASSEMBLY INSTRUCTIONS
Email: info@dreamonme.com
www.dreamonme.com
ITEM NO: 641
Dream On Me Haven
Adult assembly required
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Plesae read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw drive
Flat head screw drive
641
Hammer
DO NOT use power drills or drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. DO NOT use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/
1
MADE IN CHINA
Page 2
WARNING
.Failure to follow these warnings and the assembly instructions could result in serious injury
or death.
Read all instructions before assembling cradle.KEEP INSTRUCTIONS FOR FUTURE
.
USE.
.
Periodically check the safety of your cradle, by making certain all scerws,nuts and bolts
are tightened securely and insepect cradle for damaged hardware, loose joints,missing
parts or sharp edges. DO NOT use the cradle if any parts are missing or broken. Ask your
local dealer for replacement part and instruction literature if needed. DO NOT substitute
parts.
When child is able to climb out unaided, the cradle should no longer be used.
.
DO NOT suspend items with long strings into cradle. DO NOT place cradle near a window
.
where cords from blinds or drapes may strangle a child. DO NOT tie pacifiers, necklaces,
or any other item around a chlid’s neck or on the cradle parts. This could cause
strangulation.
.
DO NOT use a water mattress with this cradle.
DO NOT use shipping or other bags as mattress covers since they can cause suffocation.
.
.
Never aim or point a vaporizer or humidifier directly at the cradle as the water vapour
could
.
Wash with mild soap and a damp cloth. Do not use abrasives. Avoid furniture polish as it
could be hazardous to your child. If refinishing, use a non-toxic finish specific for children’s
products.
FALL HAZARD--To help prevent falls,do not use this product when the infant begins to
push up on hands or has reached 30lbs,whichever comes first.
SUFFOCATION HAZARD--Infants have suffocated in gaps between extra padding and
side of the cradle.On soft bedding Never add a pillow or comforter.Use only the pad
provided by Dream On Me.Never place addtional padding under an infant.
To reduce the risk of SIDS,pediatricians recommend healthy infants be placed on their
backs to sleep,unless otherwise advised by your physician.
If a sheet is used with the pad, use only the one provided by the bassinet or cradle
manufacturer or one specifically designed to fit the dimension of the bassinet or cradle
mattress.
ruin the finish of it.
2
Page 3
C
3
Page 4
PARTS LIST FOR #641
641
A: Head board Bottom (2PCS)
Center Base Rail (1PC)
D:
HARDWARE AND TOOLS DIAGRAM
B:
Panel MDF (1PC)
E:
Head board Top (2PCS)
C:
Rail (2PCS)
F:Mattress (1PC)
Assembly bolt 1-3/4”(8 pcs)
a:
a:
e. cap nut
(4 pcs)
tuerca de tapa
(4 pcs)
Shelf brace screw 1-3/8” (6 pcs)
b:
1-3/4”
b:
(6 pcs)
f: Cradle lock (2 pcs)
2
c:
Allen key(2 pcs)
g:Plastic washers (2 pcs)
2
4
d:
Cradle lock screw (4 pcs)
(2 pcs)
PHILLIPS--HEAD SCREWDRIVER
REQUIRED FOR ASSEMBLY
----NOT INCLUDE
4
Do Not Use Power Drills or Drivers
Page 5
Connect rail (B) to one of the headboard (A) by bolts (a)
DO NO’T FULLY TIGHTEN. ALL THE BOLTS.
STEP 1
Insent the bottom shelf (C) to the gap of the
headboard(A) and rails (B).
STE P
2
B
b
A
D
A
b
e
A
D
B
b
b
e
D
A
A
b x 2
a
B
D
a x 8
c
a
c
B
a
5
Page 6
STEP 3
Connect another headboard (A) to the rail (B)
by bolts (a)
TIGHTEN ALL BOLTS.
.
B
d
E
B
6
Page 7
STEP 4
Connect the four cradle locks(f) to the head
washers (g).
Then put in the mattress (D).
4
B
E
B
board (A) with the bolts (d) and plastic
F
STEP
5
Put down the four cradle locks (f) to make the cradle stable.
ake it ,then it can swing.
T
5
F
B
B
g
d
f
UNLOCK
LOCK
f
7
Page 8
LIMITED WARRANTY
workmanship and agrees to remedy any such defect.
This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
rights which vary from State to State.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE
8
Page 9
1532, S. Washington Avenue
Piscataway, NJ 08854
E-mail: info@dreamonme.com
www.dreamonme.com
Follow us on
@dreamonmeinc
@dreamonmeinc
to get your nursery featured on our social media.
Enter our monthly giveaway!
Simply scan the QRcode to register.
For any questions or concerns or feedback.
Chat with us!
Loading...