Sector Shower Enclosure Installation Instructions
IMPORTANT
Please read carefully the following instructions before installing your shower enclosure. If
you have any questions on this shower enclosure installation - please call our technical
support specialists Monday to Friday 9:00AM – 5:00PM EST at 1-866-731-8378 Option 3
or e-mail our technical support group at support@BathAuthority.com
Our product may have changes without prior notice
Preparation
1. After opening the boxes, read this introduction carefully, check all the packed parts are
complete by cross checking all the components against the “Detailed Diagram of
Shower Enclosure Components”. Examine for shipping damage. If the unit has been
damaged, has a finishing defect or has missing parts please contact your local
distributor within 3 business days. Please note that Bath Authority
will not replace any damaged product or missing parts free of charge after 3
business days or if the product has been installed. Contact your distributor or
DreamLine if you have any questions.
2. Please note that you should consult your local building codes on questions on
installation compliance standards. Building and plumbing codes vary by
location, and DreamLine is not responsible for code compliance standards for
your project.
3. Install all of the required plumbing and drainage before securing the shower. Use a
competent and licensed (if required by local code) plumber for all plumbing
installation.
4. Please insure that prior to the installation the floor is leveled and solid and will be able
to support the total weight of the unit and its occupant. Also make sure the walls are at
right angles. While some adjustment in leveling of the tray is possible, irregular floor
level or improper angle of side walls will result in serious problems for your installation.
Please, note that there are some adjustments and drilling might be necessary during
the installation pr oc ess.
TM
/ DreamLine TM
Tools Required
Caulk
Level
Rev. 1.4.
Tape
Measure
Pencil
Caulk
Gun
Drill bit
(D=3mm)
Electric
Drill
Wrench
Phillips
Screwdriver
2
Detailed Diagram of Shower Enclosure Components
7
8
9
10
11
12
13
14
15
16
1
2
3 4
5
6
17
18
Packing List
01 Wall profile 2pcs 10 Round head screw ST4.2×30 8pcs
02 Glass profile 2pcs 11 Round head screw ST4.2×25 8pcs
Guide rail with attached
03
04 Glass door 2pcs 13 Flat head screw ST4.2×16 4pcs
05 Stationary glass 2pcs 14 Decorative cover 4sets
06 Handle 2pairs 15 Wall anchor 8pcs
07 Magnetic strip 1pair 16 Glass holder 4pcs
08 Anti-water strip 4pcs 17 Wheel assembly 4pairs
09 Single side strip 2pcs 18 Bottom tray 1pc
After you have checked that all components are there, you will be ready to start the
installation of your Dreamline shower enclosure.
stopper
2pcs 12 Round head screw ST4.2×10 4pcs
Rev. 1.4.
3
Enclosure Installation
Install a shower tray according to the Tray installation manual. You should do it before the
wonder board and finish wall installation. The shower enclosure has to be installed after
you finish the wall.
1. Assemble Glass profile (02) with Guide rail (03) using Round head screw
ST4.2x25 (11).
2. Push the Stationary glass (04) into Glass profile groove, and then fasten it by Glass
holder (16) with Flat head screws ST4.2×16 (13) to the Guide rail. See Fig 2 for
details.
3. Secure another side of Stationary glass inside of the Glass profile groove with Single
side plastic strip (09). Push Single side plastic strip between glass and side of
groove. See Fig 2 and Fig 3 for details.
4. Push the Wall profile (01) all the way over the Glass profile (02). Be sure to keep a
tong with predrilled holes inside of shower. See Fig 4 for details.
5. Carry the assembled unit on the top of tray; push it against wall. You can adjust
position of the shower by pulling it partially out of the wall profile. Now adjust one of
wall profiles vertically using level and mark holes on the wall. Using help to hold this
profile in the right position, level another profile and mark holes. Gently move the
assembled unit on the side, drill holes into the wall, insert Wall anchors (15). Place
the whole shower assembly on the tray and attach it to the wall using Round head
screws ST4.2×30 screws (10). See Fig 5 and Fig 6 for details.
6. Your unit can be shipped to you with the Wheel assembles (17) installed on the
doors. If not, please refer to diagram (fig 9) how to install it. Attach the top and bottom
wheels to the glass doors. The wheel that goes on the top has an adjustable screw
and nut to adjust the door level. Note that the lock nut of upper wheel should face up.
The bottom wheel has a press button to fix the wheel on the bottom guide rail; that
button should face up. See Fig 7 for details.
7. Secure the Handle (06) to the Glass doors (04). Slide the top door wheels into the
top guide rail and push the bottom wheels in the bottom guide rail by pressing down
the button. Attach the Magnetic strips (07) to the glass doors. Use the Phillips
screwdriver #2 (do not use power screwdriver) to adjust the upper wheels, make
sure they move smoothly and the doors close tight. Then attach the Anti-water strips
(08). See Fig 8 for details.
8. Secure the wall profile and glass profile with Round head screws ST4.2×10 (12).
Cover the screw location with Decorative cover (14). See Fig 9 for details.
9. Seal with silicone caulk between Wall profile, Glass Profile, bottom rail and tray. See
Fig 10 for details.
Rev. 1.4.
4
Fig 1 Fig 2
Rev. 1.4.
Fig 3 Fig 4
5
1
￠
3
1
2
2
6
Fig 5 Fig 6
4
5
1
2
4
4
5
3
Fig 7 Fig 8
Rev. 1.4.
6
3
6
6
3
1
2
Silicone
Fig 9 Fig 10
Product Maintenance
1. Tempered glass can be clean with nonabrasive bathroom cleaner or any glass
cleaner you use elsewhere in your home. Rinse off any glass cleaner that gets on the
aluminum as soon as possible to avoid damage to the anodized surface. Avoid striking
it with any sharp or hard objects. Such damage can cause either immediate or delayed
breakage of tempered glass.
2. The aluminum in your shower door is durable and resistant to water damage. It is
advisable, but not necessary to wipe it with your towel after your shower. Clean it as
often as needed to keep the buildup off. Never use any type of abrasive cleaner. Use
only a soft damp cloth and nonabrasive bathroom cleaners.
3. Maintenance of wheel:
A: for plastic wheel, use a little lubricating oil to keep it smooth and lo ng last.
B: for metal wheel, except adding of oil, if shower has not been used for a long time,
you can dry the wheel and put a little grease to keep it well working conditions.
C: Adjust wheel screw periodically to guarantee moving door effective bearing and
sliding.
Rev. 1.4.
7
WARRANTY
DREAMLINE™ LIMITED WARRANTY
This is Bath Authority LLC’s (“DreamLine”) exclusive written warranty effective April 2, 2012
This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only
to DreamLine™ products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be
provided with all warranty claims. In no event shall the liability of DreamLine™ exceed the purchase price of the unit.
If DreamLine™ shower & tub doors, shower enclosures and shower bases are used commercially, DreamLine™ warrants such products to be free from
defects in material and workmanship for one (1) year from initial date of purchase from an authorized dealer, with all other terms of this warranty applying
except duration. If DreamLine™ vanities, vessel sinks and shower columns are used commercially, DreamLine™ warrants such products to be free from
defects in material and workmanship for three (3) months from initial date of purchase from an authorized dealer, with all other terms of this warranty applying except duration. DreamLine™ Jetted and Steam Shower Cabins are not intended for commercial use and there is no warranty extended
for these products for commercial use.
DreamLine™ hereby disclaims all warranties for products sold as dealer or store displays. DreamLine™ hereby disclaims all warranties for products used outside of
the United States or Canada whether expressed or implied, including but not limited to the implied warranties of merchantability and tness for a particular purpose.
DreamLine™ will, at its election, repair, replace with product of equal value or make appropriate adjustment where DreamLine’s analysis or inspection of
warranty claim discloses any such defects occurring in normal usage within the warranty period. DreamLine warranty obligation shall be discharged upon
tender of replacement or repair. Purchaser’s refusal to accept the tender terminates warranty obligation.
Cost of freight for returning products to DreamLine™ for repairs or replacement under this limited warranty are the responsibility of the customer. Cost of
freight associated with shipping of replacement product or parts to the customer may be charged to customer. Any product replaced or repaired during the
warranty period will be covered only for the remaining period of the original warranty. In no event will DreamLine be liable for costs of repair or replacement
of any installation material, including but not limited to tiles, marble, etc. DreamLine™ is not responsible for installation, removal or reinstallation
costs of any product requiring warranty services.
Improper modication or alteration of any DreamLine™ products will void the warranty. DreamLine product installations and repairs must be performed
by either a DreamLine authorized agent or a licensed experienced professional contractor - installation or repairs performed by any other party shall void
the warranty. This warranty shall not apply to breakage or damages caused by normal wear and tear, fault, carelessness, abuse, misuse, misapplication,
improper maintenance, alteration or modication of the unit, as well as chemical or natural corrosion, accident, re, ood, act of God or any other casualty. Improper care and cleaning will void the warranty. Use of cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents
or other products not recommended for chrome or similar nish, glass or acrylic will void the warranty. For additional product maintenance instructions
please refer to product installation manual. DreamLine™ is not responsible for any issues arising in connection with errors or omissions in information
provided on DreamLine’s websites. The warranty does not extend to any non-DreamLine™ plumbing or components installed by installers, end users
or by any party other than DreamLine™.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BATH AIUTHORITY LLC (“DREAMLINE”) AND/OR SELLER DISCLAIM ALL LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES. DREAMLINE™ IS NOT LIABLE FOR PERSONAL INJURIES OR DEATH TO ANY PERSON OR FOR ANY DIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGE, LOSS OF USE, LOSS OF TIME, LOSS OF PROFITS, INCONVENIENCE,
INCIDENTAL EXPENSES, LABOR OR MATERIAL CHARGES, OR ANY OTHER COSTS RESULTING FROM THE USE OF ITS
PRODUCTS OR PERTAINING TO THE APPLICATION OF THE PRESENT WARRANTY, OR RESULTING FROM THE REMOVAL OR
REPLACEMENT OF ANY PRODUCT OR ELEMENT OR PART COVERED BY THIS WARRANTY.
DreamLine™ is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is
excluded from this warranty. DreamLine™ reserves the right to modify this warranty at any time - such warranty modication will not alter warranty ap-
plicable at the time of sale of the products in question. The warranty terms for specic products are:
SHOWER & TUB DOORS, SHOWER ENCLOSURES AND SHOWER BASES
DreamLine™ warrants shower & tub doors, shower enclosures and shower bases to be free from defects in workmanship and materials under
normal residential use for a period of ve (5) years from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
SHOWER CABINS (JETTED & STEAM)
DreamLine™ warrants glass, acrylic and nish to be free from defects in workmanship for a period of ve (5) years from initial date of purchase by
the owner/end-user, contractor or builder from an authorized dealer; and plumbing, electrical and steam generator components for a period of
one (1) year from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
SHOWER COLUMNS
DreamLine™ warrants shower columns to be free from defects in workmanship and materials under normal residential use for a period of one
(1) year from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
VANITIES AND VESSEL SINKS
DreamLine™ warrants bathroom vanities and vessel sinks to be free from defects in workmanship and materials under normal residential use
for a period of one (1) year from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
Some states/provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of special, incidental or consequential
damages, so these limitations and exclusions may not apply to you. This warranty gives you specic legal rights. You may also have other rights, which
vary from state/province to state/province.
© 2012 Bath Authority LLC.
All Rights Reserved.
Loading...