DreamGEAR DGWII-2806 User Manual

3 in 1 Fitness Starter Kit

USER’S GUIDE

PACKAGE CONTENTS:

• NeoSleeve

• Mini Massager

• Power Fit

• User’s Guide/Warranty Card

• Registration Card

USING THE NEOSLEEVE:

1. Place the NeoSleeve upside down on any flat surface.

2. Place the Wii Balance Board upside down directly on top of the
NeoSleeve, aligning the power button hole with the power button
on the Wii Balance Board.

3. One at a time, gently stretch each corner of the NeoSleeve over its
corresponding balance sensor on the bottom of the Wii Balance
Board. Be careful not to rip the NeoSleeve.

4. Carefully smooth out any wrinkles by pulling gently on the outer
seam of each corner.

USING THE MINI MASSAGER:

1. Remove the battery cover on the top of the Mini Massager by
pushing down on the top and turning in a counter-clockwise
direction.

2. Insert 3 “AAA” batteries (sold seperately).

3. Replace the battery cover and turn clockwise to lock.

4. Massaging action is activated automatically when pressure is
applied to the top of the Mini Massager.

www.dreamgear.net

USING THE POWER FIT:

1. Remove the battery door located on the bottom of the Wii Balance
Board and insert the Power Fit with the contact points going in
first. The hinges will lock into place, indicating proper installation
has been completed.

2. Plug the USB power cable into any available USB port on the Wii
console. Turn on your Wii Balance Board.

3. To remove, press the release tab and lift the Power Fit up and out.