DreamGEAR DGWII-1114 User Manual

Contents:

• Blue LED Glow Saber

• Red LED Glow Saber

• 2 Glow Saber handles

1. Insert 2 “AAA” batteries into the battery compartment
located on the bottom portion of the Glow Saber
extension. Align the pegs on top of the Wii Remote
handle with the slots located on the bottom of the Glow
Saber extension.

7.To remove the Wii Remote from the handle, slide up the
latch on the Wii Remote handle. Lift the Wii Remote up
and out.

(NOTE: Always practice safety first. When you are swinging the Glow
Sabers, be aware of your surrounding making sure not to hit anyone or
anything. To prevent injury and property damage, make sure the Glow Saber
extension is properly and securely attached to the Wii Remote handle and
you are within a reasonable distance from your television and any people
around you. The Glow Sabers are designed for gaming only, never swing
one Glow Saber at another Glow Saber. Always use your Wii Remote wrist
straps when using the Dual Glow Sabers.)

Dual Glow Sabers

USER’S GUIDE

www.dreamgear.net

2. Insert the Glow Saber extension to the Wii Remote
handle.

3. Turn the Glow Saber extension counter-clockwise and
lock into place.

4. Insert the Wii Remote into the handle by sliding up the
latch located on top of the Wii Remote handle and set
into place.

5. Power the Glow Saber On/Off with the switch located
right below the battery compartment. The Glow Saber
will illuminate once the power switch is set to the “ON”
position.

6. To detach the Glow Saber extension from the Wii Remote
handle, slide down the latch on the Wii Remote handle.
Turn the Glow Saber extension clockwise and lift up and
out.

www.dreamgear.net

Troubleshooting:

Problem: The Glow Saber extension does not properly stay secure on the
Wii Remote handle?

Solution: Make sure the pegs on the Glow Saber extension line up with the
slots on the Wii Remote handle. Make sure there aren’t any broken parts or
any debris on the Glow Saber extension and Wii Remote handle. Make sure
the latch for connecting the handle to the Glow Saber extension isn’t
damaged.

Problem: The Wii Remote does not stay properly secure inside the Remote
handle?
Solution: Make sure the latch on the handle is properly set.

Problem: The Glow Saber will not iluminate?
Solution: Make sure the Glow Saber extension is powered ON. Make sure
there are batteries in the Glow Saber extension. Make sure the batteries are
inserted properly and securely. Replace batteries

DISCLAIMER: dreamGEAR is NOT responsible for any damage to personal
injury and or property when using this product. It is your responsibility to
practice proper safety procedures.

FOR TECHNICAL SUPPORT

PLEASE CONTACT: 1-877-999-DREAM

or [e-mail]