DreamGEAR DGWII-1036 User Manual

PACKAGE CONTENTS:

• Dual Charging Station

• Power Pass-thru Cable

• 2 Rechargeable Battery Packs

• 2 Battery Pack Charging Adapters

• User’s Guide/Warranty Card

• Registration Card

Using the included
power pass-thru cable:

SET-UP/CHARGING:

1. Remove the battery cover on your Wii Remote and remove any
batteries that may be installed.

2. Replace the original batteries and cover with one of the included
Rechargeable Battery Packs.

3. With the Dual Charging Station properly

connected to your Nintendo Wii, place
one or two Wii Remotes into the
charging docks. Note: Battery Packs

can be charged alone by inserting the
included Battery Pack Charging
Adapter into the dock before inserting
the Battery Pack (see below).

step 1 step 2

Dual Charging Station

Connect to Charging
Dock (input)

Connect to the Wii
AC adapter (input)

Wii AC adapter

(input)

4. Charging will begin automatically. The RED LED indicates

charging, the BLUE LED indicates a full charge.

5. The Charging Dock charges your Wii Remotes even if your Wii

console is powered OFF.

6. The blue accent lighting can be turned on or off by switching
between the OFF and ON options on the back of the Dual
Charging Station.

PLEASE CONTACT: 1-877-999-DREAM

FOR TECHNICAL SUPPORT

or [e-mail]