DreamGEAR DGWII-1033 User Manual

Package Contents:

SET-UP/CHARGING:

1 - Charging Dock 1 - Pass-thru Power Cable 2 - Rechargeable Battery Packs

PASS-THRU POWER CABLE USE:

1) Connect the Wii AC adapter to the AC recepticle end of the Pass-thru Cable.

2) Plug mini-USB cord into Charging Dock.

3) Plug power cable to AC recepticle on back of Wii.

1) Remove the battery lid on your Wii Remote and remove any batteries that may be installed.

2) Replace the original battery lid with one of the included rechargeable battery packs.

3) With the Charging Dock properly connected to your Wii, place one or two remotes on to the Charging Dock. Note: make sure you have

installed the included rechargeable battery packs into your Wii remotes.

4) Charging will begin automatically. The RED LED indicates charging, the BLUE LED indicates the pack is fully charged.

5) The Charging Dock charges your Wii remotes even with Wii console powered OFF.

Charging Dock

Specifications and Main Features