dreamGEAR 3133 Users Manual

The Operating Instruction of WII Balancing Plate (Model B)

Item Number: LBI-132

I. Brief Introduction

Our products utilize Bluetooth technology to connect signal with WII

mainframe and can be operated in far distance. The products are used with WII

remote control together in WII mainframe, supporting

of various kinds of

balancing plate fitness recreation. And all these function operations conform to

original WII balancing plate operation. It makes people feel more comfortable
and accurate and have an immersed sense, being helpful to physical exercise.

Our products are equipped with code buttons and code signs.

II. Product Information

1. Packaging accessories: balancing plate 1pcs and instruction book 1pcs

2. Diagram of product functions, as shown in Figure1

III. Product properties

1. Equipped with SYNC code key;

2. Equipped with pairing directional light key;

3. With blue light LED decorative lamps;

4. With four “AA” ordinary alkaline batteries for a job with more than ten

hours;

5. long distance operation to achieve more than five meters

IV. Product specification

1. Working voltage: DC 4v-6v

2. Working current: 50-65MA

3. Product weight: 3.6kg

4. Product material: ABS

V. Operational approach

1. First connect with host computer power. After connect Av cable and TV

with infrared receiver, the corresponding indicator lamp will light when WII

host computer power is opened.

2. Put the game disc into the console; after WII remote control has conformed

to the previous code you are prompted to enter the game.

3. Open WII balance board battery cover, put four AA batteries into the battery

compartment and click the POWER button, blue LED lights will be off after

flashing about 3 seconds. Press SYNC button, blue LED lights will be off after

flashing about 20 seconds. It shows that WII balance board is switched on and

you can enter the operational status of the code.

4. Click the SYNC key in WII Balance Board battery compartment, blue LED

lights flash; then quickly click WII SYNC host key (or press the host SYNC key,

then the balance board SYNC key, this can also satisfy the code). When the

signal in the balance board satisfies that in WII host computer, the blue LED

light in WII balance board will be from the flash light to normally light. This

shows that connecting with the host is successful, cover the battery cover, and